2012 International Residential Code For One And Two Family Dwellings

"A Member of the International Code Family."

This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. The 2021 IRC contains many important changes such as: Braced wall lines must be placed on a physical wall or placed between multiple walls. The rated separation for two-family dwellings is 1 hour whether or not a lot line exists between units. Emergency escape and rescue openings require a clear 36-inch-wide path to a public way. An engineered design is required for storm shelters. A habitable attic is limited to one-half the area of the story below and the dwelling requires sprinklers. Updated Wind Speed maps match IBC and ASCE 7 maps. Deck design now considers snow load, tributary area for footing and post height, and guard details. Specific requirements for deck guardrails were added. Component and cladding wind pressures in Table R301.2(2) are updated for new design wind speeds and hip or gable roof profiles. Minimum footing size tables are revised to more accurately reflect current practice. Cripple wall requirements apply only to exterior cripple walls. New appendices for cob construction and 3D printed construction are added. A 30 percent reduction of airflow is permitted for balanced ventilation systems. Commercial gas cooking appliances are prohibited. The head pressure for a water test of DWV systems increased to 10 feet. Air vacuum testing is now permitted for plastic piping DWV systems. Section P2904 for dwelling sprinklers is expanded to more closely align with NFPA 13D. An emergency service disconnect is required in a readily accessible outdoor location. A surge-protective device (SPD) is now required at the service panel. The number of receptacle outlets required for peninsular and island countertops in kitchens is determined by the area of the countertop surface.

An organized, structured approach to the 2018 INTERNATIONAL PLUMBING CODE Loose leaf Version, these TURBO TABS will help you target the specific information you need, when you need it. Packaged as pre-printed, full-page inserts that categorize the IPC into its most frequently referenced sections, the tabs are both handy and easy to use. They were created by leading industry experts who set out to develop a tool that would prove valuable to users in or entering the field.

Offers the latest regulations on designing and installing commercial and residential buildings.

A COMPLETE, FULL-COLOR GUIDE TO THE 2012 INTERNATIONAL BUILDING CODE Updated to reflect the International Code Council 2012 International Building Code, this time-saving resource makes it easy to understand and apply complex IBC requirements and achieve compliance. More than 600 full-color illustrations help to clarify the application and intent of many code provisions, with an emphasis on the structural and fire- and life-safety provisions. The 2012 International Building Code Handbook provides the information you need to get construction jobs done right, on time, and up to the requirements of the 2012 IBC. Achieve Full Compliance with the 2012 IBC: Scope and Administration Definitions Use and Occupancy Classification Special Detailed Requirements Based on Use and Occupancy General Building Heights and Areas Types of Construction Fire and Smoke Protection Features Interior Finishes Fire Protection Systems Means of Egress Accessibility Interior Environment Exterior Walls Roof Assemblies and Rooftop Structures Structural Loads and Design Special Inspections and Tests Soils and Foundations Concrete Aluminum Masonry Steel Wood Glass and Glazing Gypsum Board and Plaster Plastic Plumbing Fixture Count Elevators and Conveying Systems Special Construction Encroachments in the Public Right-of-Way Safeguards During Construction Existing Structures Referenced Standards

With an emphasis on design and installation for optimum performance, the 2015 INTERNATIONAL PLUMBING CODE SOFT COVER sets forth established requirements for plumbing systems. This important reference guide includes provisions for fixtures, piping, fittings, and devices, as well as design and installation methods for water supply, sanitary drainage, and storm drainage. The 2015 edition of the code includes information on public toilet facilities, as well as water temperature limiting devices, and replacement water heater installation. Using both prescriptive- and performance-related specifications, this code provides comprehensive minimum regulations for a variety of plumbing facilities, facilitating the design and acceptance of new and innovative products, materials, and systems.

ASCE standard, Minimum Design Loads for Buildings and Other Structures, (ASCE 7-93 a revision of ANSI/ASCE 7-88), gives requirements for dead, live, soil, wind, snow, rain, and earthquake loads, and their combinations, that are suitable for inclusion in building codes and other documents. The major revision of this standard involves the section on earthquake loads. This section has been greatly expanded to include the latest information in the field of earthquake engineering. Based on this information criteria for the design and construction of buildings and similar structures subject to earthquake ground motions are presented. The basis of the requirement is described in the Commentary. The structural load requirements provided by this standard are intended for use by architects, structural engineers, and those engaged in preparing and administering local building codes.