3d Printing In Oral Maxillofacial Surgery

This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.

Cutting edge information for all oral and maxillofacial surgeons on computed tomography and guided surgery! Topics include comparison of CT and cone beam technologies, stereolithographic modeling and surgical guide concepts, virtual technologies in dentoalveolar evaluation and surgery, computer guided planning and placement of dental implants, utilization in the treatment of facial trauma, digital technologies in pathology and reconstruction, 3D technologies in craniofacial and orthognathic surgery, evaluation and fabrication of custom cosmetic facial implants, and extraoral craniofacial applications.

Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. Consolidates today’s available information on this timely topic into a single, convenient, resource.

Filling a gap in the literature, this is the first book to comprehensively discuss 3D printing applied to bone surgery. It provides both the scientific basics and practical applications, with a special focus on 3D-printed, custom-made titanium prostheses (3DPCMP) used for bone reconstruction following tumor resection. Initially applied to pelvic and scapular prostheses – because of their of highly complex anatomy – this technology is increasingly being adopted in other fields of orthopedics, such as limb surgery, traumatology and degenerative diseases. Throughout the book, experts from various fields share their knowledge, describing 3D printing applied to the reconstruction of different bone segments, reviewing each application and comparing it with traditional reconstruction. They also present real-world case studies from their clinical practice. Uniquely responding to the growing interest surrounding 3D printing for bone reconstruction, this book is invaluable for orthopedic, neuro- , head and neck as well as maxillofacial surgeons wishing to gain insights into this new and promising field.

Advanced oral and maxillofacial surgery encompasses a vast array of diseases, disorders, defects, and deformities as well as injuries of the mouth, head, face, and jaws. It relates not only to treatment of impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancers, jaw cysts, and tumors but also to facial cosmetic surgery and placement of dental and facial implants. This specialty is evolving alongside advancements in technology and instrumentation. Volume 1 has topped 132,000 chapter downloads so far, and Volume 2 is being downloaded at the same pace! Volume 3 is basically the sequel to Volumes 1 and 2; 93 specialists from nine countries contributed to 32 chapters providing comprehensive coverage of advanced topics in OMF surgery.

This book provides a thorough, up-to-date description of the scientific basis and concepts of tissue engineering in the oral and maxillofacial region. The opening chapters present an introduction to tissue engineering, describe the roles of biomaterials and stem cells, discuss the use of growth factors, and examine potential adverse reactions. The challenges of soft and hard tissue engineering for oral and maxillofacial reconstruction are then considered in detail. It is explained what has been achieved to date, and potential future perspectives are explored. The importance and the verification of adequate vascularization are discussed, and a further focus is the use of 3D printing, both in the planning and production of scaffolds and in the bioprinting of cells and biomaterials. Information is also included on safety, efficacy, and regulatory aspects. Tissue Engineering in Oral and Maxillofacial Surgery will be of interest to all researchers and practitioners who wish to learn more about the potential of tissue engineering to revolutionize practice in oral and maxillofacial surgery.

This handy volume illustrates the basics of clinical three-dimensional (3D) printing, addressing the practical aspects of establishing a simple and effective 3D printing service in a medical facility. No longer confined to makers and workshops, this very recent technology has been fast developing and rapid prototyping has proven its potential in the clinical field as well, leading to new approaches. The declared aim of this work is enabling medical professionals to create bespoke anatomical models from a series of CT or MRI images, and assisting them in choosing the best suited 3D printers and materials for each specific clinical need. The text includes original, full-color step-by-step photos for better guidance, and a complete review of related publications in literature. Single chapters devoted to specific areas of 3D printing application, such as rhinoplasty, ear reconstruction, oculoplasty, maxillofacial surgery, as well as for surgical simulations. Contents are completed by a review of the legal aspects and the safety and quality considerations, as well as a thorough examination of the variety of 3D printers, compatible materials as filaments and resins, and including the available online resources. Plastic, Ophthalmologic and Maxillofacial surgeons, and professionals dealing with surgical reconstruction, will find this guide to be a valuable companion for the understanding of 3D printing in clinical practice.

This book covers the application of emerging technologies, occurring after the 4th industrial revolution, in oral and maxillofacial surgery (OMFS) and introduces a new era of personalized medicine in this discipline. It describes the manufacturing and data acquisition methods, in detail, including the advantages and disadvantages of each process. The workflow of using the emerging technologies in reconstructive treatments, orthognathic surgery, implant dentistry, robotic surgery and bio‐fabrication have been covered in separate chapters. Several related cases in conjunction with the workflow are presented and discussed as clinical examples of each, for practical discussion of the workflow and process trajectory. Each chapters provides introduction, definition, application and plausible pitfalls of employing these technologies in specific areas. Given the multiple materials and techniques, the logic behind selection of each in different fields of practice and thorough explanation of process provides surgeons with a background on how and why a certain approach is employed, and if application of emerging technologies would outdo traditional treatment processes. The importance of fabricating living tissues is discussed as one of the most recent progresses in the field. The bench-to-bedside transition, their clinical application, and their remarkable positive impact on oral and maxillofacial surgical procedures are covered. This book is arranged for oral and maxillofacial, and plastic surgeons and in-training-fellows in associated fields.