Designing With Plastics

"Designing with Plastics" is an indispensable tool for every engineer and designer working with plastic materials. It will assist in the development of plastic parts that are not only functional and esthetically pleasing but also manufacturable while meeting ever increasing end-use requirements. The short but concise introduction into the specific properties of this material class focuses on the practical needs of the designer and lays the foundation for the following in-depth discussion of part design suitable for production and the intended end-use application. Numerous detailed examples highlight practical tips and rules of thumb for successful part design. Content: - Structure and Properties - Properties of Generic Polymeric Materials - Physical Properties - Characteristic Values - Test Methods and Procedures - Geometrically Simple Structural Parts under Static Loads - Design and Material Considerations for Parts Subjected to Mechanical Loads - Designing for Production - Flexing Elements - Mechanical Fasteners - Ribbed Structures - Gear Wheels - Friction Bearings - Wheels and Rollers

Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.

For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.

This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.

Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts

In this book, the authors have assembled a systematic set of design parameters describing short and long term mechanical, thermal, electrical, fire and environmental performance, etc. for composites based primarily on continuous glass, aramid and carbon fibres in thermosetting and thermoplastic matrices.

Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization

This book is aimed at designers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with. The reader is provided with an introduction to plastics as a design material and a discussion of materials commonly in use today. There is a discussion of a variety of processes available to the designer to make a part along with the design considerations each process will entail. This section also includes a discussion of useful prototyping processes, including advantages and disadvantages of each. Next, the book will discuss general design considerations applicable to most plastics product designs. In section 2 of the book the author will discuss elements of design of a number of generic plastic product types based on his 40+ years of experience of product design and development for a several companies with a variety of products. This section will include discussions of structural components, gears, bearings, hinges, snap fits, packaging, pressure vessels, and optical components. This section will discuss the general considerations that apply to these applications as well as specific incites about each particular application. The book concludes with a discussion of the general design process.