Differential Scanning Calorimetry

Differential Scanning Calorimetry (DSC) is a well established measuring method which is used on a large scale in different areas of research, development, and quality inspection and testing. Over a large temperature range, thermal effects can be quickly identified and the relevant temperature and the characteristic caloric values determined using substance quantities in the mg range. Measurement values obtained by DSC allow heat capacity, heat of transition, kinetic data, purity and glass transition to be determined. DSC curves serve to identify substances, to set up phase diagrams and to determine degrees of crystallinity. This book provides, for the first time, an overall description of the most impor tant applications of Differential Scanning Calorimetry. Prerequisites for reliable measurement results, optimum evaluation of the measurement curves and esti mation of the uncertainties of measurement are, however, the knowledge of the theoretical bases of DSC, a precise calibration of the calorimeter and the correct analysis of the measurement curve. The largest part of this book deals with these basic aspects: The theory of DSC is discussed for both heat flux and power compensated instruments; temperature calibration and caloric calibration are described on the basis of thermodynamic principles. Desmearing of the measurement curve in different ways is presented as a method for evaluating the curves of fast transitions.

MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.

Differential scanning calorimetry (DSC) is the most important thermal analysis technique used today and the most common thermal analysis instrument found in chemical characterization laboratories. DSC has become an everyday tool in characterization laboratories, but many researchers using this technique have a limited understanding of the true breadth of its capabilities. Up to now, there has been no book that would describe the application of DSC in all the various areas of materials chemistry. The Handbook of Differential Scanning Calorimetry has been written to fill that void. This book is designed to summarize the knowledge of differential scanning calorimetry so that materials researchers and application chemists are given both a better understanding of techniques , as well as a review of the full scope of its capabilities. It also discusses how to properly interpret the DSC thermograms data obtained. Included in this work is the most up-to-date information written by some of the leaders in the field. It is written not only to help users get the most out of their equipment, After reading this book, people in all chemical and biological areas will have a broad overview of this measuring technique, and will be able to utilize this analytical technique more efficiently. Provides a detail description of the theory behind differential scanning while simultaneously providing a wider breadth of understanding of the actual DSC technique Includes a review of the basics of heat flux and power compensation DSC’s, as well as separate chapters on inorganic and organic materials Reviews the most common commercial DSC instruments on the market and their uses, including TA Instruments, Perkin-Elmer, Hitachi, Mettler Toledo, Netzsch, and Setaram

Differential Scanning Calorimetry: Applications in Fat and Oil Technology provides a complete summary of the scientific literature about differential scanning calorimetry (DSC), a well-known thermo-analytical technique that currently has a large set of applications covering several aspects of lipid technology. The book is divided into three major sections. The first section covers the applications of DSC to study cooling and heating profiles of the main source of oils and fats. The second is more theoretical, discussing the application of DSC coupled to related thermal techniques and other physical measurements. And the third covers specific applications of DSC in the field of quality evaluation of palm, palm kernel, and coconut oils and their fractions as well as of some other important aspects of lipid technology such as shortening and margarine functionality, chocolate technology, and food emulsion stability. This book is a helpful resource for academicians, food scientists, food engineers and technologists, food industry operators, government researchers, and regulatory agencies.

Calorimetry, as a technique for thermal analysis, has a wide range of applications which are not only limited to studying the thermal characterisation (e.g. melting temperature, denaturation temperature and enthalpy change) of small and large drug molecules, but are also extended to characterisation of fuel, metals and oils. Differential Scanning Calorimetry is used to study the thermal behaviours of drug molecules and excipients by measuring the differential heat flow needed to maintain the temperature difference between the sample and reference cells equal to zero upon heating at a controlled programmed rate. Microcalorimetry is used to study the thermal transition and folding of biological macromolecules in dilute solutions. Microcalorimetry is applied in formulation and stabilisation of therapeutic proteins. This book presents research from all over the world on the applications of calorimetry on both solid and liquid states of materials.

Thermal Analysis techniques are used in a wide range of disciplines, from pharmacy and foods to polymer science, materials and glasses; in fact any field where changes in sample behaviour are observed under controlled heating or controlled cooling conditions. The wide range of measurements possible provide fundamental information on the material properties of the system under test, so thermal analysis has found increasing use both in basic characterisation of materials and in a wide range of applications in research, development and quality control in industry and academia. Principles and Applications of Thermal Analysis is written by manufacturers and experienced users of thermal techniques. It provides the reader with sound practical instruction on how to use the techniques and gives an up to date account of the principle industrial applications. By covering basic thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) including the new approach of Fast Scanning DSC, together with dynamic mechanical analysis (DMA /TMA) methods, then developing the discussion to encompass industrial applications, the book serves as an ideal introduction to the technology for new users. With a strong focus on practical issues and relating the measurements to the physical behaviour of the materials under test, the book will also serve as an important reference for experienced analysts.

Here, researchers review the latest breakthroughs in protein research. Their contributions explore emerging principles and techniques and survey important classes of proteins that will play key roles in the field's future. Articles examine the possibility of a Boltzman-like distribution in protein substructures, the new technique of Raman spectroscopy, and compact intermediate states of protein folding. This well-illustrated volume also features coverage of proteins that bind nucleic acids.

With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials