Drilling Fluids Processing Handbook

Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book. Written by a team of more than 20 of the world's foremost drilling experts, from such companies as Shell, Conoco, Amoco, and BP There has never been a book that pulls together such a vast array of materials and depth of topic coverage in the area of drilling fluids Covers quickly changing technology that updates the drilling engineer on all of the latest equipment, fluids, and techniques

Describes the method and mechanical systems available to control drilled solids in drilling fluids used in oil well drilling. Explains the fundamentals of good solids control, which is financially rewarding.

A Practical Handbook for Drilling Fluids Processing delivers a much-needed reference for drilling fluid and mud engineers to safely understand how the drilling fluid processing operation affects the drilling process. Agitation and blending of new additions to the surface system are explained with each piece of drilled solids removal equipment discussed in detail. Several calculations of drilled solids, such as effect of retort volumes, are included, along with multiple field methods, such as determining the drilled solids density. Tank arrangements are covered as well as operating guidelines for the surface system. Rounding out with a solutions chapter with additional instruction and an appendix with equation derivations, this book gives today's drilling fluid engineers a tool to understand the technology available and step-by-step guidelines of how-to safety evaluate surface systems in the oil and gas fields. Presents practical guidance from real example problems that are encountered on drilling rigs Helps readers understand multiple field methods and drilled solids calculations with the help of practice questions Gives readers what they need to master each piece of drilling fluid processing equipment, including mud cleaners and safe mud tank arrangements

Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book. .Written by a team of more than 20 of the world's foremost drilling experts, from such companies as Shell, Conoco, Amoco, and BP. .There has never been a book that pulls together such a vast array of materials and depth of topic coverage in the area of drilling fluids. .Covers quickly changing technology that updates the drilling engineer on all of the latest equipment, fluids, and techniques."

This is an introductory text for those interested in Drilling Mud Engineering. The novice will find this book answers many questions about the field. The experienced Mud Engineer will find a host of resources on various important topics.

Drilling fluid is used to aid the drilling of boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. Liquid drilling fluid is often called drilling mud. The three main categories of drilling fluids are water-based muds (which can be dispersed and non-dispersed), non-aqueous muds, usually called oil-based mud, and gaseous drilling fluid, in which a wide range of gases can be used. The main functions of drilling fluids include providing hydrostatic pressure to prevent formation fluids from entering into the well bore, keeping the drill bit cool and clean during drilling, carrying out drill cuttings, and suspending the drill cuttings while drilling is paused and when the drilling assembly is brought in and out of the hole. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.

This book presents the fundamental principles of drilling en gineering, with the primary objective of making a good well using data that can be properly evaluated through geology, reservoir engineering, and management. It is written to assist the geologist, drilling engineer, reservoir engineer, and manager in performing their assignments. The topics are introduced at a level that should give a good basic understanding of the subject and encourage further investigation of specialized interests. Many organizations have separate departments, each per forming certain functions that can be done by several methods. The reentering of old areas, as the industry is doing today, particularly emphasizes the necessity of good holes, logs, casing design, and cement job. Proper planning and coordination can eliminate many mistakes, and I hope the topics discussed in this book will playa small part in the drilling of better wells. This book was developed using notes, comments, and ideas from a course I teach called "Drilling Engineering with Offshore Considerations." Some "rules of thumb" equations are used throughout, which have proven to be helpful when applied in the ix x / Preface proper perspective. The topics are presented in the proper order for carrying through the drilling of a well.

The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. Explains a myriad of new products and fluid systems Cover the newest API/SI standards New R&D on water-based muds New emphases on Health, Safety & Environment New Chapter on waste management and disposal