Fluoropolymer Additives

In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide you with a step by step description of techniques to select and incorporate these additives in various products. Engineers and scientits involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of ‘fluoropolymer additives’ expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies

In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Engineers and scientist involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. Existing books on polymer additives only include the briefest of coverage of fluoropolymer additives. In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide readers with a step by step description of techniques to select and incorporate these additives in various products. UNIQUE FEATURES AND BENEFITS: Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones. Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives. Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies.

Introduction to Fluoropolymers, Second Edition, provides a comprehensive overview of the history, principles, properties, processing and applications of fluoropolymers, supporting their development and utilization in high-performance applications, components, and products. This second edition has been updated and expanded to include new in-depth chapters on manufacturing and applications of PTFE and melt processible fluoropolymers. The book begins by demonstrating the role of fluoropolymers in everyday life, before introducing the history and basic principles of fluoropolymers. This is followed by detailed coverage of the main fluoropolymer types. Properties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellant and flame-retardant, with unrivalled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book, with a final chapter examining safety, disposal, and recycling in detail. This book is an essential resource for anyone looking to understand or use fluoropolymer materials in their products. This includes engineers, product designers, manufacturers, scientists, researchers, and other professionals, across industries such as automotive, aerospace, medical devices, food and beverages, high performance apparel, oil and gas, renewable energy, solar photovoltaics, electronics and semiconductors, pharmaceuticals, and chemical processing. This is also a valuable introductory guide for academic researchers and advanced students in plastics engineering, polymer science, and materials science. Introduces and demystifies fluoropolymers for a wide audience of engineers, designers, professionals, and researchers, across industries and disciplines Covers a broad range of materials, including polytetrafluoroethylene (PTFE), polyvinyl fluoride (PVF), vinylidene fluoride polymers, fluoroelastomers, and more Focuses on properties, processing methods and advanced industrial applications of fluoropolymers

Fluoropolymers continue to enable new materials and technologies as a result of their remarkable properties. This book reviews fluoropolymer platforms of established commercial interest, as well as recently discovered methods for the preparation and processing of new fluorinated materials. It covers the research and development of fluoropolymer synthesis, characterization, and processing. Emphasis is placed on emerging technologies in optics, space exploration, fuel cells, microelectronics, gas separation membranes, biomedical instrumentation, and much more. In addition, the book covers the current environmental concerns associated with fluoropolymers, as well as relevant regulations and potential growth opportunities. Concepts, studies, and new discoveries are taken from leading international laboratories, including academia, government, and industrial institutions.

Advanced Fluoropolymer Nanocomposites: Fabrication, Processing, Characterization and Applications presents a comprehensive review on the fundamental chemistry, physics, biology and engineering of advanced fluoropolymer nanocomposites. Detailed attention is given to the synthesis, processing characterization, properties and applications of fluoropolymer nanocomposites. Morphological, thermal, electrical, mechanical, tribological and viscoelastic properties are also discussed in detail, along with the influence of synthesis methods on the formation of fluoropolymer nanocomposites, including the effect of nanofiller size and shape and the dispersion state of various nanofillers in different fluoropolymer matrices. This book will be a useful reference resource for scientists, engineers and postgraduate students working in the field of polymer science and technology, materials science and engineering, composites and nanocomposites. This resource will help them find solutions to both fundamental and applied problems associated with their research. It will also assist researchers in becoming more acquainted with the field to address key questions within a short time. Covers the range of fluoropolymer nanocomposites and their fabrication, processing, structural, physical, thermal, electrical and mechanical properties Discusses high-performance applications in the electronics, energy, architecture, environmental, biomedical and textile industries Presents the latest information on disposal and recycling, safety considerations, and the environmental and health impact of fluoropolymer nanocomposites

First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.

Handbook of Thermoplastic Fluoropolymers: Properties, Characteristics and Data gathers key technical information about structure, characteristics, properties and processing methods of commercial thermoplastic fluoropolymers in one easy reference. Thermoplastic fluoropolymers have many desirable functional characteristics, such as high thermal stability, reliability at high mechanical loads, a wide range of operating temperatures, and high chemical and radiation stability. These characteristics make them crucial in many specialist applications, including in the military, biopharmaceuticals and environmental protection. This uniquely comprehensive guide to this versatile family of polymers will help processors, fabricators and end-users find new and innovative solutions.Detailed coverage of technical details of processing methods, characteristics, and chemical properties of commercial thermoplastic fluoropolymers all in one place make this the most authoritative reference to the subject available. Includes extensive physical and mechanical property data for commercial thermoplastic fluoropolymers Provides comprehensive chemical resistance data for commercial thermoplastic fluoropolymers Explains the basics of fluoropolymers for readers with different backgrounds