Oil And Gas

Every oil and gas refinery or petrochemical plant requires sufficient utilities support in order to maintain a successful operation. A comprehensive utilities complex must exist to distribute feedstocks, discharge waste streams, and remains an integrated part of the refinery’s infrastructure. Essentials of Oil and Gas Utilities explains these support systems and provides essential information on their essential requirements and process design. This guide includes water treatment plants, condensate recovery plants, high pressure steam boilers, induced draft cooling towers, instrumentation/plant air compressors, and units for a refinery fuel gas and oil systems. In addition, the book offers recommendations for equipment and flow line protection against temperature fluctuations and the proper preparation and storage of strong and dilute caustic solutions. Essentials of Oil and Gas Utilities is a go-to resource for engineers and refinery personnel who must consider utility system design parameters and associated processes for the successful operations of their plants. Discusses gaseous and liquid fuel systems used to provide heat for power generation, steam production and process requirements Provides a design guide for compressed air systems used to provide air to the various points of application in sufficient quantity and quality and with adequate pressure for efficient operation of air tools or other pneumatic devices. Explains the water systems utilized in plant operations which include water treatment systems or raw water and plant water system; cooling water circuits for internal combustion engines, reciprocating compressors, inter- cooling and after-cooling facilities; and "Hot Oil" and "Tempered Water" systems

Natural gas and crude oil production from hydrocarbon rich deep shale formations is one of the most quickly expanding trends in domestic oil and gas exploration. Vast new natural gas and oil resources are being discovered every year across North America and one of those new resources comes from the development of deep shale formations, typically located many thousands of feet below the surface of the Earth in tight, low permeability formations. Deep Shale Oil and Gas provides an introduction to shale gas resources as well as offer a basic understanding of the geomechanical properties of shale, the need for hydraulic fracturing, and an indication of shale gas processing. The book also examines the issues regarding the nature of shale gas development, the potential environmental impacts, and the ability of the current regulatory structure to deal with these issues. Deep Shale Oil and Gas delivers a useful reference that today’s petroleum and natural gas engineer can use to make informed decisions about meeting and managing the challenges they may face in the development of these resources. Clarifies all the basic information needed to quickly understand today’s deeper shale oil and gas industry, horizontal drilling, fracture fluids chemicals needed, and completions Addresses critical coverage on water treatment in shale, and important and evolving technology Practical handbook with real-world case shale plays discussed, especially the up-and-coming deeper areas of shale development

A prominent linchpin in world politics and in security policies world over, oil and gas have tremendous value in both, the political and economical sectors of global relations, business establishments and policy. Regardless of whether one is a novice to a given field, or a well accomplished veteran in the field, there is a need for the continued engagement with the basics that underlie the core subjects. With that in mind, the Fundamentals of Oil and Gas is a perfect primer for the first-timer in the field, while also a copious text to help a seasoned veteran stay abreast with the nuances of the world of Oil and Gas.

Shale Oil and Gas Handbook: Theory, Technologies, and Challenges provides users with information on how shale oil and gas exploration has revolutionized today’s energy industry. As activity has boomed and job growth continues to increase, training in this area for new and experienced engineers is essential. This book provides comprehensive information on both the engineering design and research aspects of this emerging industry. Covering the full spectrum of basic definitions, characteristics, drilling techniques, and processing and extraction technologies, the book is a great starting point to educate oil and gas personnel on today’s shale industry. Critical topics covered include characterization of shale gas, theory and methods, typical costs, and obstacles for exploration and drilling, R&D and technology development in shale production, EOR methods in shale oil reservoirs, and the current status and impending challenges for shale oil and gas, including the inevitable future prospects relating to worldwide development. Reveals all the basic information needed to quickly understand today’s shale oil and gas industry, including advantages and disadvantages, equipment and costs, flow diagrams, and processing stages Evenly distributes coverage between oil and gas into two parts, as well as upstream and downstream content Provides a practical handbook with real-world case studies and problem examples, including formulas and calculations

Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source. Starting with a brief explanation on corrosion management that also addresses today’s most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influenced corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics. Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today’s oil and gas corrosion challenges. Covers the latest in corrosion mitigation techniques, such as corrosion inhibitors, biocides, non-metallics, coatings, and modeling and prediction Solves knowledge gaps with the most current technology and discoveries on specific corrosion mechanisms, highlighting where future research and industry efforts should be concentrated Achieves practical and balanced understanding with a full spectrum of subjects presented from multiple academic and world-renowned contributors in the industry

Unconventional Oil and Gas Resources Handbook: Evaluation and Development is a must-have, helpful handbook that brings a wealth of information to engineers and geoscientists. Bridging between subsurface and production, the handbook provides engineers and geoscientists with effective methodology to better define resources and reservoirs. Better reservoir knowledge and innovative technologies are making unconventional resources economically possible, and multidisciplinary approaches in evaluating these resources are critical to successful development. Unconventional Oil and Gas Resources Handbook takes this approach, covering a wide range of topics for developing these resources including exploration, evaluation, drilling, completion, and production. Topics include theory, methodology, and case histories and will help to improve the understanding,integrated evaluation, and effective development of unconventional resources. Presents methods for a full development cycle of unconventional resources, from exploration through production Explores multidisciplinary integrations for evaluation and development of unconventional resources and covers a broad range of reservoir characterization methods and development scenarios Delivers balanced information with multiple contributors from both academia and industry Provides case histories involving geological analysis, geomechanical analysis, reservoir modeling, hydraulic fracturing treatment, microseismic monitoring, well performance and refracturing for development of unconventional reservoirs