A Manual Of Chemical Biological Methods For Seawater Analysis

An introduction to the quantitative analysis of seawater, describing in detail biological and chemical techniques, which are considered to be amongst those most often used by biological oceanographers. The manual provides complete instructions for the addition of reagents and calculation of results with reference material for each method so that the original texts can be consulted if necessary. In general, the techniques require a minimum of prior professional training and methods needing very expensive equipment have been avoided.

书名原文∶A manual of chemical and biological methods for seawater analysis

Methods in Microbiology

Since the book first appeared in 1976, Methods of Seawater Analysis has found widespread acceptance as a reliable and detailed source of information. Its second extended and revised edition published in 1983 reflected the rapid pace of instrumental and methodological evolution in the preceding years. The development has lost nothing of its momentum, and many methods and procedures still suffering their teething troubles then have now matured into dependable tools for the analyst. This is especially evident for trace and ultra-trace analyses of organic and inorganic seawater constituents which have diversified considerably and now require more space for their description than before. Methods to determine volatile halocarbons, dimethyl sulphide, photosynthetic pigments and natural radioactive tracers have been added as well as applications of X-ray fluorescence spectroscopy and various electrochemical methods for trace metal analysis. Another method not previously described deals with the determination of the partial pressure of carbon dioxide as part of standardised procedures to describe the marine CO2 system.

Analysis of Seawater deals with the investigation of the micro-constituents in seawater in terms of nutrient content and environmental concerns. The book describes sampling, determination of anions, analysis of dissolved gases, and metal preconcentration techniques. The book also deals with monitoring radioactive elements, the determination of seawater organics, organometallic compounds, and the oxygen-demand parameters in seawater. It describes in detail surface and deep water sampling, the types of devices used, storage, preservation, and prevention of contamination during sample analysis. In examining dissolved gases, the investigator can use the amperometric titrimetric method (with some reservations) on chlorine, the ultraviolet method on ozone, electron capture gas chromatography on nitric oxide, and also the flow injection analysis on hydrogen sulphide. The methods for determining metals in seawater concern either for single element or for groups of elements. The investigator should always initiate various pre-concentration techniques when determining metals due to their low concentration and occurrence in seawater. The investigator uses various methods to determine different radioactive compounds such as uranium, polonium, thorium, radium, barium, radon, plutonium, strontium-90, and cesium-137. The book can be beneficial for meteorologists, environmentalists, marine ecologists, biologists, oceanographers, fisheries experts, for students studying hydrology, meteorology, as well as for river and lake authorities.

Since the book first appeared in 1976, Methods of Seawater Analysis has found widespread acceptance as a reliable and detailed source of information. Its second extended and revised edition published in 1983 reflected the rapid pace of instrumental and methodological evolution in the preceding years. The development has lost nothing of its momentum, and many methods and procedures still suffering their teething troubles then have now matured into dependable tools for the analyst. This is especially evident for trace and ultra-trace analyses of organic and inorganic seawater constituents which have diversified considerably and now require more space for their description than before. Methods to determine volatile halocarbons, dimethyl sulphide, photosynthetic pigments and natural radioactive tracers have been added as well as applications of X-ray fluorescence spectroscopy and various electrochemical methods for trace metal analysis. Another method not previously described deals with the determination of the partial pressure of carbon dioxide as part of standardised procedures to describe the marine CO2 system.

This practice-oriented guidebook collects nearly all methods published since 1975 on the chemical analysis of seawaters. Detailed descriptions of both classical and most advanced physico-chemical and chemical techniques including 45 tables and 48 figures make this volume an invaluable source for analysts, oceanographers, fisheries experts, politicians and decision makers engaged in seawater environmental protection. The methods are presented in a logical manner so that the reader can readily learn to perform them.