Accelerating Environmental Technology Implementation

A Survey of Present Practices and New Directions and New Directions. This report summarizes the information gathered from a survey of representative members of the environmental community. The main purposes of the survey were to assess the present conditions affecting the introduction of new environmental products and innovative technologies into the marketplace, and to determine how the Environmental Technology Evaluation Center (EvTEC) can play an effective role in accelerating this process.

Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report presents the findings from a June 1997 Environmental Technology Needs Survey conducted by EvTEC. The survey was developed to help EvTEC gain a better understanding of present practices and procedures in evaluating new products and determine how EvTEC could best respond to the needs of all stakeholders in the environmental community. The survey contained general information questions as well as specialized questions for three groups: users and regulators of environmental products; entrepreneurs who invent, develop, or market new technologies and products; and research institutes and testing labs that carry out product and technology evaluations.

Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.

Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions

Prepared by the Environmental Technology Evaluation Center (EvTEC) and the Highway Innovative Technology Evaluation Center (HITEC), CERF Service Centers. This report provides an update on technology and is intended to assist the Federal Highway Administration's Priority Technology Program (PTP) and departments of transportation in all 50 states. It identifies barriers that hinder the widespread use of bioremediation in the highway environment, as well as methods to overcome these barriers. The evaluation is based on design, construction, performance, and quality assurance information outlined in the HITEC and EvTEC Protocols. The three case studies examine PTP projects in Alabama, Indiana, and Mississippi.

Prepared by CEITEC, a CERF innovation center serving the engineering and construction industries. This report describes an evaluation of Sewer Scanner and Evaluation Technology (SSET) designed to determine the basic capabilities and limitations of SSET for use as a technicallly viable technology for inspecting sewer pipes. The evaluation focused on the performance and in-service demonstration of SSET. The technology involves digital scanning to obtain a flat, "unfolded" image of the pipeline's interior. This evaluation includes field demonstrations performed at 13 municipal public works agencies throughout North America. Subsequent to this evaluation, SSET was modified to include a fisheye lens camera and fiber optic gyroscope, which replaced the rotating mechanical scanner and mechanical gyroscope. The evaluation confirmed the operability of SSET and its viability in data presentation. A degree of enhancement was recognized with additional features, most notably the ability to produce a digital report of the sewer pipe, to identify vertical deflection in pipes, and to deliver easily comprehensible and manageable results. The evaluation also revealed that SSET cannot reproduce all the features typically available from closed-circuit television (CCTV) inspection. Such features include the ability to clearly see corrosion, infiltration rates, and ovality. The limitations in applicability were determined and an economic comparison of SSET and CCTV is provided.

Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the INTER-LOK System for use as a technically viable, precast mechanically stabilized earth retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The INTER-LOK System features a cross-shaped, segmental precast concrete facing panel connected to metallic rebar and anchor plate type of soil reinforcement attached to the facing panels by a keyplate that interlocks with the facing panels.