Adaptive Digital Control Of Multi Input Multi Output Industrial Processes

Theory and Application of Digital Control contains the proceedings of the IFAC Symposium held at New Delhi, India on January 5-7, 1982. This book particularly presents the texts of the five plenary talks and the 110 papers of the symposium. This book organizes the papers into 109 chapters, with nearly one-third of the papers focus on digital control, particularly, software and hardware of control using microcomputers; computer-aided design; and adaptive control and modeling for digital control. Another set of papers deal with several applications of digital control techniques in solving interesting problems of socio economic systems, electrical power systems, bio systems, and artificial satellites. The reader will benefit hugely from the topics in this book that span several important theoretical and applied areas of the fast-changing topic of digital control.

Adaptive Systems in Control and Signal Processing 1983 is a compendium of papers presented at the International Federation of Automatic Control in San Francisco on June 20-22, 1983. One paper addresses the results through comparative alternative algorithms in adaptive control of linear time invariant and time varying systems. Another paper presents a method in computer simulation of a wide range of stable plants to achieve an alternative approach in designing an adaptive control system. The book also compares the stability and the sensitivity approach involving the design of model-reference adaptive systems. The authors involved explain that the sensitivity concept determines the "dynamic speed of adaptation," while the stability concept focuses on finding a linear compensator for any deviant signal. One paper proposes an indirect adaptive control algorithm for MIMO square full rank minimum phase systems, while another paper discusses the application of the discrete time multivariable adaptive control system, to non-minimum phase plants with an unknown dead time. This book can prove valuable to engineers and researchers of electrical, computer, and mechanical engineering. It can also be helpful for technicians and students dealing with automatic control and telecontrol.

Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shop floor deployment are presented along with ideas for further improvement of the technology. Process Control for Sheet-Metal Stamping allows the reader to design and implement process controllers in a typical manufacturing environment by retrofitting standard hydraulic or mechanical stamping presses and as such will be of interest to practising engineers working in metal-working, automotive and aeronautical industries. Academic researchers studying improvements in process control and how these affect the industries in which they are applied will also find the text of value.

The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.

Considers the application of modern control engineering on digital computers with a view to improving productivity and product quality, easing supervision of industrial processes and reducing energy consumption and pollution. The topics covered may be divided into two main subject areas: (1) applications of digital control - in the chemical and oil industries, in water turbines, energy and power systems, robotics and manufacturing, cement, metallurgical processes, traffic control, heating and cooling; (2) systems theoretical aspects of digital control - adaptive systems, control aspects, multivariable systems, optimization and reliability, modelling and identification, real-time software and languages, distributed systems and data networks. Contains 84 papers.

Plant Intelligent Automation and Digital Transformation: Process and Factory Automation is an expansive four volume collection reviewing every major aspect of the intelligent automation and digital transformation of power, process and manufacturing plants, from the specific control and automation systems pertinent to various power process plants through manufacturing and factory automation systems. This volume introduces the foundations of automation control theory, networking practices and communication for power, process and manufacturing plants considered as integrated digital systems. In addition, it discusses Distributed control System (DCS) for Closed loop controls system (CLCS) and PLC based systems for Open loop control systems (OLCS) and factory automation. This book provides in-depth guidance on functional and design details pertinent to each of the control types referenced above, along with the installation and commissioning of control systems. Introduces the foundations of control systems, networking and industrial data communications for power, process and manufacturing plant automation Reviews core functions, design details and optimized configurations of plant digital control systems Addresses advanced process control for digital control systems (inclusive of software implementations) Provides guidance for installation commissioning of control systems in working plants

Software for Computer Control is a collection of papers and lectures presented at the Second IFAC/IFIP Symposium on Software for Computer Control, held in Prague, Czechoslovakia in June 1979. The symposium is organized with the hope of making vital contributions to the development of the computer sciences. The text focuses on the design and programming of process control systems used in various industrial processes and experiments. Topics covered include communication control in computer networks; program generators for process control applications; methods for the design of control software; presentations on software for microprocessors; real-time languages; algorithms for computer control; and applications of computer control in sciences. Computer scientists, systems analysts, programmers, and students of computer science will benefit from this book.