Adhesion

Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.

The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.

Explains the physics and chemistry of adhesion, surface preparation and testsPresents new strategies for formulating superior strong, weak and pressure-sensitive adhesivesIncludes access to unique electronic apps that enable numerical modeling of adhesives This technical bound book explains the basic principles of adhesion and shows how they are used to formulate and improve adhesives. The volume starts by laying out key physical and chemical concepts underlying adhesion and adhesives, including strong and weak bonds plus pressure-sensitive (PSA) across multiple polymer, metal and ceramic adherends. The ideas are expressed in clear and easily understood mathematical formulas that explain surface properties as well as "good" and "bad" adhesion, with the latter covering multiple types of adhesive failure. In this context, the book presents a detailed explanation of methods to predict, test and formulate adhesives and critically analyzes test results and traditionally accepted rules for adhesive formulation. The eBook version includes online access to a unique set of applied computer programs or "apps" that automate a wide range of adhesive formulas and enable readers to input their own data and numerically model adhesion properties in conjunction with, or prior to, chemical compounding and empirical testing. This volume constitutes a lucid and practical introduction to adhesion and adhesives appropriate for specialists at all levels.

Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.

Evolved as a reference book for participants at a short annual fall course at the State University of New York at New Paltz. This first volume concentrates on adhesion with or without the use of an adhesive. Second volume title 'Adhesive bonding' deals with bonding with the aid of adhesives.

At the beginning of the twentieth century, engineers and technologists would have recognized the importance of adhesion in two main aspects: First, in the display of friction between surfaces — at the time a topic of growing importance to engineers; the second in crafts requiring the joining of materials — principally wood—to form engineering structures. While physical scientists would have admitted the adhesive properties of glues, gels, and certain pastes, they regarded them as materials of uncertain formulation, too impure to be amenable to precise experiment. Biological scientists were aware also of adhesive phenomena, but the science was supported by documentation rather than understanding. By the end of the century, adhesion and adhesives were playing a crucial and deliberate role in the formulation of materials, in the design and manufacture of engineering structures without weakening rivets or pins, and in the use of thin sections and intricate shapes. Miniaturization down to the micro- and now to the nano-level of mechanical, electrical, electronic, and optical devices relied heavily on the understanding and the technology of adhesion. For most of the century, physical scientists were aware that the states of matter, whether gas, liquid, or solid, were determined by the competition between thermal energy and int- molecular binding forces. Then the solid state had to be differentiated into crystals, amorphous glasses, metals, etc. , so the importance of the molecular attractions in determining stiffness and strength became clearer.

This is a comprehensive introduction to the chemistry of adhesives, and will be of interest to chemists, but also to readers with a background in physical or materials science.