Advanced Laser Process For Surface Enhancement

Two typical hybrid laser surface modification processes, i.e. electro/magnetic field aided laser process and supersonic laser deposition technology, are introduced in the book, to solve the common problems in quality control and low efficiency of the laser-only surface modification technology, high contamination and high consumption of the traditional surface modification technology. This book focuses on the principle, characteristics, special equipment, process and industrial applications of the hybrid laser surface modification processes based on the recent research results of the author’s group, and provides theoretical guidance and engineering reference for the researchers and engineers engaging in the field of surface engineering and manufacturing.

This book introduces the applications of laser in surface modification, such as laser cladding of Stellite alloys and metal-ceramic composites. Besides, nanomaterials including carbon nanotubes and Al2O3 nanoparticles are brought into the laser processing, to form high-temperature resistance, chemical stability, and wear- and oxidation-resistant composite coatings. The readers will get more knowledge about the basic principle and application of laser cladding and laser surface hardening technologies, and gain a deep insight into the process and characteristics of the nanomaterial-assisted laser surface enhancement. It provides references for the researchers, engineers, and students in the fields of mechanical engineering, laser processing, and material engineering.

This book presents the proceedings of the first INCASE conference, organised by ARTC at A*STAR, Singapore. It provides a comprehensive review of recent advances in surface enhancement processes and strategies employed to assess their impact on materials properties and performance. As cyber-physical systems are becoming more and more relevant in manufacturing, it focuses on assessing the readiness of current technologies for future transformations, such as Industry 4.0, identifying the opportunities and challenges, and exploring ways to address them. Written by researchers, practising engineering and industry experts, the book bridges the gap between research and manufacturing, promoting technology adoption in industry and innovative ideas to prepare it for the future.

The use of lasers in material processing has become a useful method for transforming industrial materials into finished products. The benefits of laser material processing are vast, including increased precision, high processing speed, and dustless cutting and drilling. Advanced Manufacturing Techniques Using Laser Material Processing explores the latest methodologies for using lasers in materials manufacturing and production, the benefits of using lasers in industrial settings, as well as future outlooks for this technology. This innovative publication is an essential reference source for professionals, researchers, and graduate-level students studying manufacturing technologies and industrial engineering.

Synthesis of nonequilibrium metallic phases has been an area of great interest to the materials processing community since early 1960. Inherent rapid cooling rates in laser processing are being used to engineer non-equilibrium microstructures which cannot be rivaled by other processes. This lecture will discuss the phenomena involved and its application in designing materials with tailored properties. What is non-equilibrium Synthesis? This is a synthesis method to produce binary or higher order materials where kinetics of the pro cess affects the transport of the constituent elements during phase transformation resulting in a composition or crystallographic configuration which is different from what is observed when the elements arranges themselves with the lowest possible Gibbs Free energy, which is the equilibrium condition. Figure 1 illustrates the phenomena. Phase diagram under equilibrium condition is illustrated by the solid line whereas the no-equilibrium phase diagram is represented by the dotted line. One can observe the shrinkage of the phase field under non-equilibrium condition. Any alloy composition between the solidus lines of the equilibrium and non-equilibrium phase diagram will be a non equilibrium alloys with extended solid solution.

Proceedings of the NATO Advanced Study Institute, San Miniato, Italy, September 2-13, 1985

Handbook of Post-Processing in Additive Manufacturing is a key resource on postprocessing treatments available for additive manufactured products. It provides broad coverage of the theory behind emerging technology, material development, functional characterization, and technical details required to investigate novel applications and methods and put them to use. The handbook presents experimental breakthroughs of novel methodologies that treat additively manufactured parts, which are suitable for demanding engineering applications. This handbook emphasizes the various types of post-processing technologies that can effectively eliminate the inferiorities of additively manufactured components. It also provides a collection of key principles, literature, methodologies, experimental results, case studies, and theoretical aspects of the different types of postprocessing techniques, along with different classes of materials and end-applications. This book is an ideal reference for libraries and post-graduate courses as well as the professional market, including, but not limited to manufacturing, mechanical and industrial engineering, and materials science.

This text defines and covers different themes of post-processing techniques based on mechanical, chemical/electrochemical, and thermal energy. It will serve as an ideal reference text for senior undergraduate and graduate students in diverse engineering fields including manufacturing, industrial, aerospace, and mechanical. This book: covers the fundamentals and advancements in the post-processing techniques for additive manufacturing; explores methods/techniques for post-processing different types of materials used in additive manufacturing processes; gives insight into the process selection criteria for post-processing of additive manufactured products made from different types of materials; discusses hybrid processes used for post-processing of additive manufacturing parts; and highlights post-processing techniques for properties enhancement. The primary aim of the book is to give the readers a well-informed layout of the different post-processing techniques that range from employing mechanical energy to chemical, electrochemical, and thermal energy to perform the intended task.