Aerosol Technology In Hazard Evaluation

Aerosol Technology in Hazard Evaluation is the fifth in the series of books on the subject of aerosol technology. This series is organized into nine chapters that cover the properties, sampling, and respirable activity of aerosol. After briefly describing the nature of an inhalation hazard, the book examines the properties, measurement, and significance of geometric diameters of aerosols, as well as the shape factors relating them to various particulate properties. The mathematical description of size distributions and the statistics of sampling from a lognormal distribution of particle sizes are provided. Considerable chapters deal with the methods of aerosol concentration measurement and geometric and aerodynamic size sampling. Operating characteristics of respirable aerosol activity samplers and their limitations are also examined. The concluding chapter discusses problems in the production, flow measurement, apparatus calibration, and isokinetic sampling of aerosols. This series will provide a convenient source of information to those concerned in industrial hygiene and will stimulate the interest of those involved in all phases of environmental health.

Biological warfare agent (BWA) detectors are designed to provide alerts to military personnel of the presence of dangerous biological agents. Detecting such agents promptly makes it possible to minimize contamination and personnel exposure and initiate early treatment. It is also important, though, that detectors not raise an alarm when the situation does not warrant it. The question considered in this book is whether Agent-Containing Particles per Liter of Air (ACPLA) is an appropriate unit of measure for use in the evaluation of aerosol detectors and whether a better, alternative measure can be developed. The book finds that ACPLA alone cannot determine whether a health threat exists. In order to be useful and comparable across all biological agents and detection systems, measurements must ultimately be related to health hazard. A Framework for Assessing the Health Hazard Posed by Bioaerosols outlines the possibility of a more complex, but more useful measurement framework that makes it possible to evaluate relative hazard by including agent identity and activity, particle size, and infectious dose.

AEROSOL TECHNOLOGY An in-depth and accessible treatment of aerosol theory and its applications The Third Edition of Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles delivers a thorough and authoritative exploration of modern aerosol theory and its applications. The book offers readers a working knowledge of the topic that reflects the numerous advances that have been made across a broad spectrum of aerosol-related application areas. New updates to the popular text include treatments of nanoparticles, the health effects of atmospheric aerosols, remote sensing, bioaerosols, and low-cost sensors. Additionally, readers will benefit from insightful new discussions of modern instruments. The authors maintain a strong focus on the fundamentals of the discipline, while providing a robust overview of real-world applications of aerosol theory. New exercise problems and examples populate the book, which also includes: Thorough introductions to aerosol technology, key definitions, particle size, shape, density, and concentration, as well as the properties of gases Comprehensive explorations of uniform particle motion, particle size statistics, and straight-line acceleration and curvilinear particle motion Practical discussions of particle adhesion, Brownian motion and diffusion, thermal and radiometric forces, and filtration In-depth examinations of sampling and measurement of concentration, respiratory deposition, coagulation, condensation, evaporation, and atmospheric aerosols Perfect for senior undergraduate and junior graduate students of science and technology, Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles will also earn a place in the libraries of professionals working in industrial hygiene, air pollution control, climate science, radiation protection, and environmental science.

Do you need guidelines for choosing a substitute organic solvent that is safer to use? Do you need an effective, cheap but perhaps temporary way to reduce exposures before you can convince your employer to spend money on a long-term or more reliable solution? Do you need information about local exhaust ventilation or personal protective equipment like respirators and gloves? Industrial Hygiene Control of Airborne Chemical Hazards provides the answers to these questions and more. Science-based and quantitative, the book introduces methods for controlling exposures in diverse settings, focusing squarely on airborne chemical hazards. It bridges the gap between existing knowledge of physical principles and their modern application with a wealth of recommendations, techniques, and tools accumulated by generations of IH practitioners to control chemical hazards. Provides a unique, comprehensive tool for facing the challenges of controlling chemical hazards in the workplace. Although William Popendorf has written the book at a fundamental level, he assumes the reader has some experience in science and math, as well as in manufacturing or other work settings with chemical hazards, but is inexperienced in the selection, design, implementation, or management of chemical exposure control systems. Where the book is quantitative, of course there are lots of formulae, but in general the author avoids vague notation and long derivations.

Are you a practicing occupational hygienist wondering how to find a substitute organic solvent that is safer to use than the hazardous one your company is using? Chapter 6 is your resource. Are you a new hygienist looking for an alternative technology as a nonventilation substitute for an existing hazard? Chapter 8 is your resource. Are you looking for an overview of ventilation? Chapters 10 and 11 are your resource? Are you an industrial hygiene student wanting to learn about local exhaust ventilation? Chapters 13 through 16 are your resource. Are you needing to learn about personal protective equipment and respirators? Chapters 21 and 22 are your resources. This new edition brings all of these topics and more right up-to-date with new material in each chapter, including new governmental regulations. While many of the controls of airborne hazards have their origins in engineering, this author has been diligent in explaining concepts, writing equations in understandable terms, and covering the topics of non-ventilation controls, both local exhaust and general ventilation, and receiver controls at the level needed by most IHs without getting too advanced. Taken as a whole, this book provides a unique, comprehensive tool to learn the challenging yet rewarding role that industrial hygiene can play in controlling airborne chemical hazards at work. Most chapters contain a set of practice problems with the solutions available to instructors. Features Written for the novice industrial hygienist but useful to prepare for ABIH certification Explains engineering concepts but requires no prior engineering background Includes specific learning goals that differentiate the depth of learning appropriate to each topic within the fuller information and explanations provided for each chapter Contains updated governmental regulations and abundant references Presents a consistent teaching philosophy and approach throughout the book Deals with both ventilation and non-ventilation controls

Volume I present an important exposition of some of the most significant areas where particle characterization is applied. The technological fields include pharmaceutical materials, bulk solids, and explosions.