An Earth Anchor System

Anchors are primarily used in the construction of foundations of earth-supported and earth-retaining structures. The fundamental reason for using earth anchors in construction is to transmit the outwardly directed load to the soil at a greater depth and/or farther away from the structure. Although earth anchors have been used in practice for several hundred years, proper theoretical developments for purposes of modern engineering designs have taken place only during the past 40 to 45 years. This book summarizes most theoretical and experimental works directed toward the development of proper relationships for ultimate and allowable holding capacity of earth anchors. J. Ross Publishing offers a supplemental download — A customizable PowerPoint instructional slide presentation prepared by the authors that complements the material covered in the book, chapter-by-chapter.

Landslides and slope failure are common in the US and rest of the world. The landslides cause significant damage to infrastructure and millions of dollars are required each year to fix the slope. A sustainable and costeffective option to stabilise the slope can have significant benefits, as it will reduce the cost of maintenance and when using recycled pins, it may help the environment at the same time. The recycled plastic pin is made from recycled plastic bottles and other plastic waste. Several demonstration projects already proved the effectiveness of RPP as an alternative option to fix slope failure, with a maximum failure depth of 7-8 ft. In this book, every detail of the slope stabilisation technique using recycled plastic pins, including the design techniques and several case studies, are included. This will help to explain the basics of this important technique and will be used as reference to design the slope stabilisation scheme using recycled plastic pins.

The book is a civil engineering handbook on winch and cable systems. The handbook may be used as textbook for university studies in civil engineering and forestry and as the basis for studies in schools on a technical level. It should be a useful reference book for construction engineers, civil engineers, logging engineers, foresters and leaders of operational activities under difficult terrain conditions. The content in the book is based on more than 35 years experience with practical winch and cable operations. As a leader of the Norwegian Institute of Forest Operations, the author has carried out research work in this field since 1947. The Institute is the owner of yarders, winches, cable cranes etc., and with its own cable crews the Institute operates as a contractor in its own research forests as well as in other state or privately owned forests throughout Norway. The research work also includes other cable crane operations in Norway and other countries. As the leader of the Joint FAO/ECE/ILO Study Group on Mechanized Forest Operations the author studied cable operations in most of the Eastern and Western European countries. As president of the International Union of Forestry Research Organizations the author visited most forest countries in the world. Information from research and practical cable crane operations were collected. The handbook is based on material on winch and cable systems used in Japan, New Zealand, Soviet Union, Central Europe, Northern Europe, Eastern United States, Western United States and British Columbia.

First published in 1990. Routledge is an imprint of Taylor & Francis, an informa company.

Treating anchorages as a direct application of the laws of statics and the theories governing the transfer of load, this book focuses on designs that are safe and reasonably priced. It is divided into two parts. Following a general introduction in the first chapter, Part One goes on to explore anchor systems, components, installation and construction details. Presents special anchor systems such as extractable, compression-type, multibell, and regroutable anchors. Analyzes the transfer of load and its relation to failure modes and anchor load capacity; deals with design considerations; covers mechanisms and types of corrosion; and details anchor stressing, testing programs, and evaluation standards. Part Two considers uses and applications and design aspects of anchored structures; presents design examples of practical value and reasonable simplicity; and incorporates examples and case histories.