Analytical Graphite Furnace Atomic Absorption Spectrometry

"One should rather go horne and mesh a net than jump into the pond and dive far fishes" (Chinese proverb) Recognizing the precise analytical question and planning the analysis according ly is certainly the first prerequisite for successful trace and ultratrace determina tions. The second prerequisite is to select the method appropriate to the analyti cal specification. The method itself consists of a set of available tools. The third prerequisite is that analysts and operators know the methods weH enough to enjoy challenging themselves as weH as the methods and are rewarded by the joy of high-quality data, fast and economical results and the conviction of having the analytical job under control. This skill is known among analysts or operators working with an exciting new and sometimes complicated analytical technique but is gradually lost on ce a technique becomes "mature" and a routine tool. Unfortunately, laboratory managers often do not allow sufficient training time for their analysts and technicians for "routine" techniques and thus miss an opportunity for motivating their co-workers and obtaining the full benefit of the equipment. Graphite furnace atomic absorption spectrometry (AAS) is one of the mature analytical techniques wh ich is seen as a routine method in most laboratories. More than 10,000 furnaces are operated in elemental trace and ultratrace analy ses in laboratories around the world today.

Die Atomabsorptionsspektroskopie mit Graphitrohrküvetten wird vor allem in der Material- und Umweltwissenschaft zur Untersuchung von Legierungen, Keramiken, Polymeren, Kompositwerkstoffen und Abwässern eingesetzt. Dieses umfangreiche Handbuch enthält viele praktische Beispiele, Tips und Tricks sowie Angaben zur instrumentellen Ausrüstung, zu modernen Entwicklungen und zur Fehlersuche: Eine wahre Fundgrube für den Praktiker, jedoch auch für Einsteiger geeignet - mit verschiedenen Anhängen, historischen Hintergrundinformationen, Literaturverzeichnissen und einem Glossar der verwendeten Fachterminologie. (06/98)

This book addresses Furnace Atomic Absorption Spectroscopy (FAAS), which has gained worldwide acceptance as an analytical technique. FAAS offers 100-1000 times better determination and detection limits than other techniques for a majority of the elements. This technique requires a small sample size, and demands less sample-preparation time than others. The handbook is a collection of thousands of references for detection and determination of various elements in agricultural products, biological and clinical samples, and metallurgical and electronic materials. Each chapter is devoted to an element or a similar group of elements. Included are instrumental setup parameters, references, and author and subject indexes. Also presented are detailed appendixes covering glossary, list of manufacturers of spectrophotometers and its accessories, list of chemical suppliers, and list of reviews and abstracts. The handbook covers topics such as heavy metals, clinical products, and trace metal analysis. This desk-top reference is meant for chemists who handle day-to-day analysis problems in laboratories in government, clinical, industrial and academic settings. It is invaluable for those involved in research in environmental science, analytical chemistry, clinical chemistry and forensic science.

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) is the most revolutionary innovation since the introduction of AAS in 1955. Here, the authors provide the first complete and comprehensive discussion of HR-CS AAS and its application to the analysis of a variety of difficult matrices. Published just in time with the first commercial instrument available for this new technique, the book is a must for all those who want to know more about HR-CS AAS, and in particular for all future users. The advantages of the new technique over conventional line-source AAS are clearly demonstrated using practical examples and numerous figures, many in full color. HR-CS AAS is overcoming essentially all the remaining limitations of established AAS, particularly the notorious problem of accurate background measurement and correction. Using a continuum radiation source and a CCD array detector makes the spectral environment visible to several tenths of a nanometer on both sides of the analytical line, tremendously facilitating method development and elimination of interferences. Conceived as a supplement to the standard reference work on AAS by B. Welz and M. Sperling, this book does not repeat such fundamentals as the principles of atomizers or atomization mechanisms. Instead, it is strictly focused on new and additional information required to profit from HR-CS AAS. It presents characteristic concentration for flame atomization and characteristic mass data for electrothermal atomization for all elements, as well as listing numerous secondary lines of lower sensitivity for the determination of higher analyte concentrations. The highly resolved molecular absorption spectra of nitric, sulfuric and phosphoric acids, observed in an air-acetylene flame, which are depicted together with the atomic lines of all elements, make it possible to predict potential spectral interferences.

The book aims at presenting an exhaustive survey of the applications of Electrothermal Atomization Atomic Absorption Spectrometry (ETA-AAS) with Zeeman background correction in a variety of fields. The unique role played by the technique in solving important analytical problems encountered today is highlighted throughout the 29 chapters which make up this multiauthored work. The overall picture that emerges from this collection of contributions testifies to the maturity reached by this instrumental methodology and lays emphasis on its capabilities, still unrivalled for many elements in terms ofoutstanding detection power afforded and minimal amounts of sample required. After an introductory chapter reviewing the major milestones of ETA-AAS over the decades, with special regard to the history and theory of the Zeeman effect and its use in background correction, the contributions which follow are distributed into four main categories, dealing with the analysis respectively of environmental samples, natural waters, foodstuffs and specimens relevant to clinical and toxicological chemistry. The substantial impact of the technique, as deduced from the literature published so far, as well as its future prospects are outlined in the final paper.

This book provides the readers with the full basic knowledge necessary to understand, evaluate and develop critically any ETAAS analysis. The book covers comprehensively all aspects of the theoretical principles, routine and unusual instrumentation, overlapping possibilities with other techniques and different analytical characteristics of ETAAS at an averaged intermediate/high level. This is a good topic for a text book owing to the wide analytical possibilities of ETAAS in academic and industry laboratories. The book is written by a qualified expert with 30 years' experience working on different aspects of ETAAS.The work guides the readers through an in-depth descriptive appraisal of the chemical and physical processes occurring in an ET atomiser. The work compares favourably with other books already published on this subject as this work shows an overview with some different perspectives, focusing mainly on the processes taking place during an ETAAS analysis. An ordered, rigorous and deep description is found in every chapter. The book would be adequate for undergraduate and graduate students in any course of analytical chemistry, researchers in analytical atomic spectrometry and analysts who routinely use ETAAS. Amateurs and specialists in this field will find a good support in the book.