Antenna Design Solutions For Rfid Tags Based On Metamaterial Inspired Resonators And Other Resonant Structures

This book describes innovative design solutions for radio-frequency identification (RFID) tags and antennas. Focusing mainly on passive ultra-high-frequency (UHF)-RFID tag antennas, it examines novel approaches based on the use of metamaterial-inspired resonators and other resonant structures as radiating elements. It also offers an exhaustive analysis of the radiation properties of several metamaterial-inspired resonators such as the split ring resonator (SRR) and related structures. Further, it discusses in detail an innovative technology for the RFID tagging of optical discs, which has demonstrated a significant improvement over the state of the art and resulted in a patent. By covering the entire research cycle of theory, design/simulation and fabrication/evaluation of RFID tags and antennas, while also reporting on cutting-edge technologies, the book provides graduate students, researchers and practitioners alike with a comprehensive and timely overview of RFID systems, and a closer look at several radiating structures.

This book is a collection of the best research papers presented at the 8th International Conference on Innovations in Electronics and Communication Engineering at Guru Nanak Institutions Hyderabad, India. Featuring contributions by researchers, technocrats and experts, the book covers various areas of communication engineering, like signal processing, VLSI design, embedded systems, wireless communications, and electronics and communications in general, as well as cutting-edge technologies. As such, it is a valuable reference resource for young researchers.

Positioning itself at the common boundaries of several disciplines, this work provides new perspectives on modern nanoscale problems where fundamental science meets technology and computer modeling. In addition to well-known computational techniques such as finite-difference schemes and Ewald summation, the book presents a new finite-difference calculus of Flexible Local Approximation Methods (FLAME) that qualitatively improves the numerical accuracy in a variety of problems.

This book, entitled Radio Frequency Identification Fundamentals and Applications, Bringing Research to Practice, bridges the gap between theory and practice and brings together a variety of research results and practical solutions in the field of RFID. The book is a rich collection of articles written by people from all over the world: teachers, researchers, engineers, and technical people with strong background in the RFID area. Developed as a source of information on RFID technology, the book addresses a wide audience including designers for RFID systems, researchers, students and anyone who would like to learn about this field. At this point I would like to express my thanks to all scientists who were kind enough to contribute to the success of this project by presenting numerous technical studies and research results. However, we couldn’t have published this book without the effort of InTech team. I wish to extend my most sincere gratitude to InTech publishing house for continuing to publish new, interesting and valuable books for all of us.

This book presents a step-by-step discussion of the design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates for UHF frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. Table of Contents: Radio Frequency Identification Introduction / Flexible Organic Low Cost Substrates / Benchmarking RFID Prototypes on Organic Substrates / Conformal Magnetic Composite RFID Tags / Inkjet-Printed RFID-Enabled Sensors

RFID (radio-frequency identification) is an emerging communication system technology and one of the most rapidly growing segments of todayOCOs automatic identification data collection industry. This cutting-edge resource offers you a solid understanding of the basic technical principles and applications of RFID-enabled sensor systems. The book provides you with a detailed description of RFID and itOCOs operation, along with a fundamental overview of sensors and wireless sensor networks. Moreover, this practical reference gives you step-by-step guidance on how to design RFID-enabled sensors that form a wireless sensor network. You also find detailed coverage of state-of OCothe-art RFID/sensor technology and worldwide applications.

This book examines the design of chipless RFID systems. The authors begin with the philosophy of RFID and its effect on commercial applications. Then, they discuss the chipless RFID systems and the application of chipless RFID systems, the advantages it provides compared to conventional barcode ID and chipped RFID tags. The text then covers chipless RFID components in block diagram representation and introduce FCC requirements which should be considered in the design procedure of each component. The third chapter is dedicated to the complex natural resonance-based design of chipless RFID tags. The next chapter concerns about the detection techniques introduced for the identification of chipless RFID tags. The fifth chapter is dedicated to the localization and anti-collision techniques in chipless RFID systems. Final chapter is chipless RFID tags as sensors. It provides some applications where the tag can be used as both ID and sensor. The tag specifications and detection issues are addressed in this section.

Advancement in sensor technology, smart instrumentation, wireless sensor networks, miniaturization, RFID and information processing is helping towards the realization of Internet of Things (IoT). IoTs are finding applications in various area applications including environmental monitoring, intelligent buildings, smart grids and so on. This book provides design challenges of IoT, theory, various protocols, implementation issues and a few case study. The book will be very useful for postgraduate students and researchers to know from basics to implementation of IoT.