Applied Finite Element Analysis With Solidworks Simulation 4th Edition

This textbook is intended to cover the fundamentals of the Finite Element Analysis (FEA) of mechanical components and structures using the SolidWorks Simulation®. It is written primary for the engineering students, engineers, technologist and practitioners who have little or no work experience with SolidWorks Simulation. It is assumed that the readers are familiar with the fundamentals of the strength of materials as offered in an introductory level course in a typical undergraduate engineering program. However, the basic theories and formulas have been included in this text as well. This textbook can be adopted for an introductory level course in Finite Element Analysis offered to students in mechanical and civil engineering and engineering technology programs. The Direct Stiffness Method is used to develop the bar, truss, beam and frame elements. Both analytical and simulation solutions are presented through examples and tutorials to ensure that readers understand the fundamentals of FEA and the simulation software. It is strongly recommended that readers always find a way to verify the FEA simulation results. In this textbook, the simulation results are verified for the truss, beam and frame structures using the analytical approaches through the Direct Stiffness Method. However, readers must consider that in many engineering problems, they have to deal with complicated geometries, loadings, and material properties which make it very difficult, if not impossible, to solve the problem using analytical methods. Chapter 1 of this textbook deals mostly with the fundamentals of the mechanical loading, 3-Dimensional and 2-Dimensional stress states, four failure theories used in the SolidWorks Simulation, basics of matrix algebra, Cramer’s rule for solving linear algebraic equations, and matrix manipulation with MATLAB®. Chapter 2 of this textbook presents a general overview of SolidWorks Simulation and addresses the main tools and options required in a typical FEA study. Types of analysis available in SolidWorks Simulation and four commercially available SolidWorks Simulation packages will be introduced. The three main steps in FEA include: (i) pre-processing; (ii) processing, and (iii) post-processing and are used in the SolidWorks Simulation working environment. They will be discussed in detail and related tools available in this software will be presented. Chapter 3 of this textbook introduces several kinds of elements available in SolidWorks Simulation. The Solid Element which is used in SolidWorks Simulation to model bulky parts will be discussed in detail. The concepts of the Element Size, Aspect Ratio, and Jacobian will be discussed. Several meshing techniques available in SolidWorks Simulation such as Mesh Control, h-Adaptive, p-Adaptive, Standard Mesh with Automatic transition, and Curvature based mesh will be presented as well. Chapter 4 of this textbook presents the Direct Stiffness Method and Truss structure analysis. The stiffness matrices will be developed for the bar and truss elements. The pre-processing, processing and post-processing tools available in SolidWorks Simulation for 1D bar element, 2D truss, and 3D truss FEA simulation will be introduced. Several examples and tutorials will be presented to show how the user can verify the simulation results by comparing them to the analytical results. Chapter 5 of this textbook deals mostly with beam and frame analysis with SolidWorks Simulation. The stiffness matrix for a straight beam element will be developed and the Direct Stiffness Method will be used to analyze both statically determinate and indeterminate beams loaded with concentrated and distributed loads. This is done by defining their equivalent nodal forces and moments. The pre-processing, meshing and post-processing phases of a typical beam FEA with SolidWorks Simulation will be presented. As before, several examples and tutorials will be presented to show how the user can verify the simulation results by comparing them to the analytical results. Chapter 6 of this textbook presents the application of 2D simplified and 3D shell elements available in SolidWorks Simulation. In particular, the application of 3D shell elements for analysis of thin parts such as pressure vessels and sheet metal parts will be discussed. The related pre-processing, meshing, and post-processing tools available in SolidWorks Simulation will be presented through several tutorials, Chapter 7 of this textbook deals with assembly analysis using the contact sets. Several types of contact sets will be introduced and their application will be explored. Advanced external forces will be presented. Compatible and incompatible meshing techniques will be introduced. Beside, several techniques to simplify the simulation of assemblies will be discussed. Several examples and tutorials will be presented to show how the user can use related tools available in SolidWorks Simulation and interpret the simulation results. Chapter 8 of this textbook introduces several types of connectors available in SolidWorks Simulation and their application. It includes the Bolt, Weld, Pin, Bearing, Spring, Elastic, Link, and Rigid connectors. Both weld and bolt connectors will be discussed in detail and several examples and tutorials will be presented.

This textbook is intended to cover the fundamentals of the Finite Element Analysis (FEA) of mechanical components and structures using the SolidWorks Simulation®. It is written primary for the engineering students, engineers, technologist and practitioners who have little or no work experience with SolidWorks Simulation. It is assumed that the readers are familiar with the fundamentals of the strength of materials as offered in an introductory level course in a typical undergraduate engineering program. However, the basic theories and formulas have been included in this text as well. This textbook can be adopted for an introductory level course in Finite Element Analysis offered to students in mechanical and civil engineering and engineering technology programs. The Direct Stiffness Method is used to develop the bar, truss, beam and frame elements. Both analytical and simulation solutions are presented through examples and tutorials to ensure that readers understand the fundamentals of FEA and the simulation software. Chapter 1 of this textbook deals mostly with the fundamentals of the mechanical loading, 3-Dimensional and 2-Dimensional stress states, four failure theories used in the SolidWorks Simulation, basics of matrix algebra and matrix manipulation with MATLABl®. Chapter 2 of this textbook presents a general overview of SolidWorks Simulation and addresses the main tools and options required in a typical FEA study. Types of analysis available in SolidWorks Simulation and four commercially available SolidWorks Simulation packages will be introduced. Chapter 3 of this textbook introduces several kinds of elements available in SolidWorks Simulation. The Solid Element which is used in SolidWorks Simulation to model bulky parts will be discussed in detail. The concepts of the Element Size, Aspect Ratio, and Jacobian will be discussed. Several meshing techniques available in SolidWorks Simulation such as Mesh Control, h-Adaptive, p-Adaptive, Standard Mesh with Automatic transition, and Curvature based mesh will be presented as well. Chapter 4 of this textbook presents the Direct Stiffness Method and Truss structure analysis. The stiffness matrices will be developed for the bar and truss elements. The pre-processing, processing and post-processing tools available in SolidWorks Simulation for 1D bar element, 2D truss, and 3D truss FEA simulation will be introduced. Chapter 5 of this textbook deals mostly with beam and frame analysis with SolidWorks Simulation. The stiffness matrix for a straight beam element will be developed and the Direct Stiffness Method will be used to analyze both statically determinate and indeterminate beams loaded with concentrated and distributed loads. The pre-processing, meshing and post-processing phases of a typical beam FEA with SolidWorks Simulation will be presented. Chapter 6 of this textbook presents the application of 2D simplified and 3D shell elements available in SolidWorks Simulation. In particular, the application of 3D shell elements for analysis of thin parts such as pressure vessels and sheet metal parts will be discussed. Chapter 7 of this textbook deals with assembly analysis using the contact sets. Several types of contact sets will be introduced and their application will be explored. Advanced external forces will be presented. Compatible and incompatible meshing techniques will be introduced. Chapter 8 of this textbook introduces several types of connectors available in SolidWorks Simulation and their application. It includes the Bolt, Weld, Pin, Bearing, Spring, Elastic, Link, and Rigid connectors. Both weld and bolt connectors will be discussed in detail and several examples and tutorials will be presented. Chapter 9 of this textbook introduces the Frequency Analysis tools provided in SolidWorks Simulation Professional to identify the natural frequencies and related mode shapes of parts and assemblies.

Young engineers are often required to utilize commercial finite element software without having had a course on finite element theory. That can lead to computer-aided design errors. This book outlines the basic theory, with a minimum of mathematics, and how its phases are structured within a typical software. The importance of estimating a solution, or verifying the results, by other means is emphasized and illustrated. The book also demonstrates the common processes for utilizing the typical graphical icon interfaces in commercial codes. in particular, the book uses and covers the widely utilized SolidWorks solid modeling and simulation system to demonstrate applications in heat transfer, stress analysis, vibrations, buckling, and other fields. The book, with its detailed applications, will appeal to upper-level undergraduates as well as engineers new to industry.

The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2022 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

• Uses step-by-step tutorials to introduce users to SOLIDWORKS Simulation 2024 • Incorporates theoretical aspects of Finite Element Analysis • Covers all the most important Finite Element Analysis techniques and concepts • Includes a chapter covering contact analysis The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2024 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2021 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Engineering Analysis with SOLIDWORKS Simulation 2022 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2022 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered • Linear static analysis of parts and assemblies • Contact stress analysis • Frequency (modal) analysis • Buckling analysis • Thermal analysis • Drop test analysis • Nonlinear analysis • Dynamic analysis • Random vibration analysis • h and p adaptive solution methods • Modeling techniques • Implementation of FEA in the design process • Management of FEA projects • FEA terminology

An introductory textbook for senior/graduate couses in finite element analysis taught in all engineering departments. Covers the basic concepts of the finite element method and their application to the analysis of plane structures and two-dimensional continuum problems in heat transfer, irrotational fluid flow, and elasticity. This revised edition includes a reorganization of topics and an increase in the number of homework problems. The emphasis on numerical illustrations make topis clear without heavy use of sophisticated mathematics.