Automation And Robotics In The Architecture Engineering And Construction Industry

Automation and Robotics in the Architecture, Engineering, and Construction Industry provides distinct and unified insight into current and future construction robotics, offering readers a comprehensive perspective for constructing a road map and illuminating improvements for a successful transition towards construction robotization. The book covers the fundamentals and applications of robotics, autonomous vehicles, and human-perceptive machines at construction sites. Through theoretical and experimental analyses, it examines the potential of robotics and automated systems for current and future fieldwork operations and identifies the factors that determine their implementation pace, adoption scale, and ubiquity throughout the industry. The book evaluates the technical, societal, and economic aspects of adopting robots in construction, both as standalone and collaborative systems, which in return can afford the opportunity to investigate these AI-enabled machines more systematically.

This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.

Automation, a mixture of algorithms, robots, software, and avatars, is transforming all types of jobs and industries. This book responds to one critical question for the design and construction industry: “how are architects, engineers, and contractors using information technology to further automate their practices?” Addressing the use of new digital technologies, particularly parametric automation for design and construction in the building industry, this book looks at how technologically advanced architectural and engineering practices are semi-automating their design processes by using sophisticated algorithms to transform their workflows. The book also documents a set of firms that are further advancing automation by using pre-fabrication, modularization, and custom designs via robotics.

After two decades, data processing has finally, and probably forever, found its niche among civil engineering and construction (CEC) professionnals, through word processors, digitizing tables, management software, and increasingly via drawing software and computer-aided design (CAD), recently, robots have even started invading work sites. What are the main trends of CAD and robotics in the field of architecture and civil enginee ring? What type of R&D effort do university and industrial laboratories undertake to devise the professional software that will be on the market in the next three to five years? These are the issues which will be addressed during this symposium. To this effect, we have planned concurrently an equipment and software show, as well as a twofold conference. Robotic is just starting in the field of civil engineering and construction. A pioneer, the Civil Engineering Departement of Carnegie-Mellon University, in the United States, organized the first two international symposia, in 1984 and 1985 in Pittsburgh. This is the third meeting on the subject (this year, however, we have also included CAD). It constitutes the first large international symposium where CAD experts, specialists in architecture and CEC robotics will meet. From this standpoint, it should be an ideal forum for exchanging views and expe riences on a wide range of topics, and we hope it will give rise to novel applications and new syntheses. This symposium is intented for scientists, teachers, students and also for manufacturers and all CEC professionals.

Sourced from international experts, this book presents papers dealing with a wide range of soft and hard research issues at various stages of development in the field. Some cover entirely new ground, whilst others reflect progress on the sometimes frustrating path to truly robust technology. Of particular interest are contributions discussing issues of exploitation and commercialisation, the integration of end products within the design and construction processes incorporating information technology (IT) and the impact of the emerging technology on the culture and organisation of the construction industry. A mark of growing maturity is apparent in the coverage of health and safety and related social issues. This is complemented by a clear commitment to the consideration of human factors and the environment. It is hoped that by promoting a wider debate on the matters of future technology and its horizons, on the identification of what industry needs from the research and development community and on building effective partnerships between academia, industry and government, the publication not only addresses the practical commercial obligation to seek robust solutions for today's problems, but will stimulate research for the years to come.

Although highly ambitious and sophisticated, most attempts at using robotic processes in architecture remain the exception; little more than prototypes or even failures at a larger scale. This is because the general approach is either to automate existing manual processes or the complete construction process. However, the real potential of robots remains unexploited if used merely for the execution of highly repetitive mass-fabrication processes: their capability for serial production of non-standard elements as well as for varied construction processes is mostly wasted. In order to scale up and advance the application of robotics, for both prefabrication and on-site construction, there needs to be an understanding of the different capabilities, and these should be considered right from the start of the design and planning process. This issue of AD showcases the findings of the Architecture and Digital Fabrication research module at the ETH Zurich Future Cities Laboratory in Singapore, directed by Fabio Gramazio and Matthias Kohler, which explores the possibilities of robotic construction processes for architecture and their large-scale application to the design and construction of high-rise buildings. Together with other contributors, they also look at the far-reaching transformations starting to occur within automated fabrication: in terms of liberation of labour, entrepreneurship, the changing shape of building sites, in-situ fabrication and, most significantly, design. Contributors: Thomas Bock, Jelle Feringa, Philippe Morel, Neri Oxman, Antoine Picon and François Roche. ETH Zurich contributors: Michael Budig, Norman Hack, Willi Lauer and Jason Lim and Raffael Petrovic (Future Cities Laboratory), Volker Helm, Silke Langenberg and Jan Willmann. Featured entrepreneurs: Greyshed, Machineous, Odico Formwork Robotics, RoboFold and ROB Technologies.

ECPPM 2022 - eWork and eBusiness in Architecture, Engineering and Construction contains the papers presented at the 14th European Conference on Product & Process Modelling (ECPPM 2022, Trondheim, Norway, 14-16 September 2022), and builds on a long-standing history of excellence in product and process modelling in the construction industry, which is currently known as Building Information Modelling (BIM). The following topics and applications are given special attention: Sustainable and Circular Driven Digitalisation: Data Driven Design and/or Decision Support Assessment and Documentation of Sustainability Information lifecycle Data Management: Collection, Processing and Presentation of Environmental Product Documentation (EPD) and Product Data Templates (PDT) Digital Enabled Collaboration: Integrated and Multi-Disciplinary Processes Virtual Design and Construction (VDC): Production Metrics, Integrated Concurrent Engineering, Lean Construction and Information Integration Automation of Processes: Automation of Design and Engineering Processes, Parametric Modelling and Robotic Process Automation Expert Systems: BIM based model and compliance checking Enabling Technologies: Machine Learning, Big Data, Artificial and Augmented Intelligence, Digital Twins, Semantic Technology Sensors and IoT Production with Autonomous Machinery, Robotics and Combinations of Existing and New Technical Solutions Frameworks for Implementation: International Information Management Series (ISO 19650), and Other International Standards (ISO), European (CEN) and National Standards, Digital Platforms and Ecosystems Human Factors in Digital Application: Digital Innovation, Economy of Digitalisation, Client, Organisational, Team and/or Individual Perspectives Over the past 25 years, the biennial ECPPM conference proceedings series has provided researchers and practitioners with a unique platform to present and discuss the latest developments regarding emerging BIM technologies and complementary issues for their adoption in the AEC/FM industry.

Construction researchers and industry practitioners have begun to explore the possibilities offered by mobile and pervasive computing in architecture, engineering and construction (AEC). It is expected that the construction industry will be keen to apply these technologies as they promise significant benefits in areas such as materials management, project management, distributed collaboration and information management, all leading to improvements in productivity. This book offers a comprehensive reference volume to the use of mobile and pervasive computing in construction. Based on contributions from a mix of leading researchers and experts from academia and industry, it provides up-to-date insights into current research topics in this field as well as the latest technological advancements and practical examples. The chapters introduce the key theoretical concepts in mobile and pervasive computing and highlight the applications and solutions which are available to the construction industry. More specifically, the book focuses on the manner in which these technologies can be applied to improve practices in construction and related industries. This book will be of particular interest to academics, researchers, and graduate students at universities and industrial practitioners seeking to apply mobile and pervasive computing systems to improve construction industry productivity.