Buckling And Ultimate Strength Of Ship And Ship Like Floating Structures

Buckling and Ultimate Strength of Ship and Ship-like Floating Structures provides an integrated state-of-the-art evaluation of ship structure mechanics including buckling, plastic failure, ultimate strength, and ultimate bending moments. For the design of any industrial product, it is necessary to understand the fundamentals in the failure behavior of structures under extreme loads. Significant developments have been made in understanding the analysis method of plastic collapse and behavior and strength of structures accompanied by buckling. Written by two of the foremost experts in international ship design and ocean engineering, this book introduces fundamental theories and methods as well as new content on the behavior of buckling/plastic collapse that help explain analysis like the initial imperfections produced by welding and the ultimate strength of plates, double bottom structures of bulk carriers, and ship and FPSO hull girders in longitudinal bending. Rounding out with additional coverage on floating structures such as oil and gas platforms and LNG/FLNG structural characteristics, Buckling and Ultimate Strength of Ship and Ship-like Floating Structures is a must-have resource for naval architects and other marine engineering professionals seeking to gain an in-depth understanding of the technological developments in this area. Explains how the initial imperfections produced by welding, residual stress, and initial deflection in panels influence the collapse behavior and the compressive ultimate strength of rectangular plates Evaluates the ultimate strength of plate girders under bending and shearing as well as combined bend/shear loads Provides fundamental theories, simple formulas, and analytical methods such as Finite Element Method or Smith's Method to simulate and evaluate buckling/plastic collapse behavior and strength of plates under various conditions Authored by two of the foremost experts in international ship design and ocean engineering Includes additional coverage on floating structures such as oil and gas platforms

Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures. The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structural members. It is very useful to ship designers, shipyard engineers, naval architects, international classification societies and also to students studying naval architecture, marine engineering and offshore structures. It is a valuable source for practicing naval architects to quickly check the possibility of buckling of ship structure members without reverting to the complex and costly analysis using advanced FEM software.

The oceans are a key resource for transportation, energy and material extraction, and food production, representing one of the most important environments on the planet. Technological developments enabling us to exploit marine resources in a sustainable way are therefore of the greatest importance. This book presents the proceedings of the NAV 2022 conference, held in Genoa and La Spezia, Italy, from 15 to 17 June 2022. The conference is held every 3 years, attracting specialists in marine technology from all over the world. NAV 2022 was the 20th edition of the conference, and covered a full spectrum of maritime technology themes, all related to the exploitation of sea resources. The book contains 87 scientific papers, covering subjects ranging from comfort on board; to conceptual and practical ship design; deep sea mining and marine robotics; protection of the environment; renewable marine energy; design and engineering of offshore vessels; digitalization and cyber security; unmanned vehicles; yacht and pleasure craft design, and inland-waterway vessels. Providing a comprehensive coverage of the latest scientific and technical maritime issues, the book will be of interest to all those involved in this vital global industry.

Trends in the Analysis and Design of Marine Structures is a collection of the papers presented at MARSTRUCT 2019, the 7th International Conference on Marine Structures held in Dubrovnik, Croatia, 6-8 May 2019. The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, and the sixth in Lisbon, Portugal in May 2017. This Conference series specialises in dealing with Ships and Offshore Structures, addressing topics in the fields of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation - Structural Reliability, Safety and Environmental Protection. Trends in the Analysis and Design of Marine Structures is an essential document for academics, engineers and all professionals involved in the area of analysis and design of Ships and Offshore Structures. About the series: The ‘Proceedings in Marine Technology and Ocean Engineering’ series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Advances in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2023, the 9th International Conference on Marine Structures, held in Gothenburg, Sweden, 3-5 April 2023. The conference was organised by the Division of Marine Technology, Department of Mechanics and Maritime Sciences at Chalmers University of Technology, in Gothenburg, Sweden. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: Methods and tools for loads and load effects Methods and tools for strength assessment Experimental analysis of structures Materials and fabrication of structures Methods and tools for structural design and optimization Structural reliability, safety, and environmental protection The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, the seventh in Dubrovnik, Croatia in May 2019, and the eighth event in Trondheim, Norway in June 2021. Advances in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Developments in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2021, the 8th International Conference on Marine Structures (by remote transmission, 7-9 June 2021, organised by the Department of Marine Technology of the Norwegian University of Science and Technology, Trondheim, Norway), and is essential reading for academics, engineers and professionals involved in the design of marine and offshore structures. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: - Methods and Tools for Loads and Load Effects; - Methods and Tools for Strength Assessment; - Experimental Analysis of Structures; - Materials and Fabrication of Structures; - Methods and Tools for Structural Design and Optimisation; and - Structural Reliability, Safety and Environmental Protection. The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, and the seventh in Drubovnik, Croatia in May 2019. The ‘Proceedings in Marine Technology and Ocean Engineering’ series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Sustainable Development and Innovations in Marine Technologies includes the papers presented at the 18th International Congress of the Maritime Association of the Mediterranean (IMAM 2019, Varna, Bulgaria, 9-11 September 2019). Sustainable Development and Innovations in Marine Technologies includes a wide range of topics: Aquaculture & Fishing; Construction; Defence & Security; Design; Dynamic response of structures; Degradation/ Defects in structures; Electrical equipment of ships; Human factors; Hydrodynamics; Legal/Social aspects; Logistics; Machinery & Control; Marine environmental protection; Materials; Navigation; Noise; Non-linear motions – manoeuvrability; Off-shore and coastal development; Off-shore renewable energy; Port operations; Prime movers; Propulsion; Safety at sea; Safety of Marine Systems; Sea waves; Seakeeping; Shaft & propellers; Ship resistance; Shipyards; Small & pleasure crafts; Stability; Static response of structures; Structures, and Wind loads. The IMAM series of Conferences started in 1978 when the first Congress was organised in Istanbul, Turkey. IMAM 2019 is the eighteenth edition, and in its nearly forty years of history, this biannual event has been organised throughout Europe. Sustainable Development and Innovations in Marine Technologies is essential reading for academics, engineers and all professionals involved in the area of sustainable and innovative marine technologies.

This three-volume work presents the proceedings from the 19th International Ship and Offshore Structures Congress held in Cascais, Portugal on 7th to 10th September 2015. The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research.The aim of