Carbon Doping Of Iii V Compound Semiconductors

This is the first book to describe thoroughly the many facets of doping in compound semiconductors. Equal emphasis is given to the fundamental materials physics and to the technological aspects of doping. The author describes various doping techniques, including doping during epitaxial growth, doping by implantation, and doping by diffusion. The key characteristics of all dopants that have been employed in III-V semiconductors are discussed. In addition, general characteristics of dopants are analyzed, including the electrical activity, saturation, amphotericity, autocompensation, and maximum attainable dopant concentration. Redistribution effects are important in semiconductor microstructures. Linear and non-linear diffusion, different microscopic diffusion mechanisms, surface segregation, surface drift, surface migration, impurity-induced disordering, and the respective physical driving mechanisms are illustrated. Topics related to basic impurity theory include the hydrogenic model for shallow impurities, linear screening, density of states, classical and quantum statistics, the law of mass action, as well as many analytic approximations for the Fermi-Dirac integral for three-, two- and one dimensional systems. The timely topic of highly doped semiconductors, including band tails, impurity bands, bandgap renormalization, the Mott transition, and the Burstein-Moss shift, is discussed as well. Doping is essential in many semiconductor heterostructures including high-mobility selectively doped heterostructures, quantum well and quantum barrier structures, doping superlattice structures and d-doping structures. Technologically important deep levels are summarized, including Fe, Cr, and the DX-center, the EL2 defect, and rare-earth impurities. The properties of deep levels are presented phenomenologically, including emission, capture, Shockley-Read recombination, the Poole-Frenkel effect, lattice relaxation, and other effects. The final chapter is dedicated to the experimental characterization of impurities. This book will be of interest to graduate students, researchers and development engineers in the fields of electrical engineering, materials science, physics, and chemistry working on semiconductors. The book may also be used as a text for graduate courses in electrical engineering and materials science.

This book describes advanced epitaxial growth and self-aligned processing techniques for the fabrication of III-V semiconductor devices such as heterojunction bipolar transistors and high electron mobility transistors. It is the first book to describe the use of carbon-doping and low damage dry etching techniques that have proved indispensable in making reliable, high performance devices. These devices are used in many applications such as cordless telephones and high speed lightwave communication systems. Contents:Compound Semiconductor Growth by Metalorganic Molecular Beam Epitaxy (MOMBE)Growth of Heterojunction Bipolar Transistors from Molecular BeamsHeteroepitaxyImplant Doping and IsolationRapid Thermal AnnealingWet and Dry Etching of III-V SemiconductorsHydrogen in Crystalline Semiconductors: III-V CompoundsHeterojunction Bipolar Transistors: Processing and DevicesNovel Heterostructure Field Effect Transistors Readership: Engineers and condensed matter physicists. keywords:Arsenide;Indium Phosphide;Processing;Semiconductors;Etching;Implantation;Contacts;Implant Isolation;Field Effect Transistors;GaAs-on-Si

This textbook gives a complete and fundamental introduction to the properties of III-V compound semiconductor devices, highlighting the theoretical and practical aspects of their device physics. Beginning with an introduction to the basics of semiconductor physics, it presents an overview of the physics and preparation of compound semiconductor materials, as well as a detailed look at the electrical and optical properties of compound semiconductor heterostructures. The book concludes with chapters dedicated to a number of heterostructure electronic and photonic devices, including the high-electron-mobility transistor, the heterojunction bipolar transistor, lasers, unipolar photonic devices, and integrated optoelectronic devices. Featuring chapter-end problems, suggested references for further reading, as well as clear, didactic schematics accompanied by six information-rich appendices, this textbook is ideal for graduate students in the areas of semiconductor physics or electrical engineering. In addition, up-to-date results from published research make this textbook especially well-suited as a self-study and reference guide for engineers and researchers in related industries.

This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.

Chemical growth methods of electronic materials are the keystone of microelectronic device processing. This book discusses the applications of metalorganic chemistry for the vapor phase deposition of compound semiconductors. Vapor phase methods used for semiconductor deposition and the materials properties that make the organometallic precursors useful in the electronics industry are discussed for a variety of materials. Topics included: * techniques for compound semiconductor growth * metalorganic precursors for III-V MOVPE * metalorganic precursors for II-VI MOVPE * single-source precursors * chemical beam epitaxy * atomic layer epitaxy Several useful appendixes and a critically selected, up-to-date list of references round off this practical handbook for materials scientists, solid-state and organometallic chemists, and engineers.