Coding Approaches To Fault Tolerance In Combinational And Dynamic Systems

Coding Approaches to Fault Tolerance in Combinational and Dynamic Systems describes coding approaches for designing fault-tolerant systems, i.e., systems that exhibit structured redundancy that enables them to distinguish between correct and incorrect results or between valid and invalid states. Since redundancy is expensive and counter-intuitive to the traditional notion of system design, the book focuses on resource-efficient methodologies that avoid excessive use of redundancy by exploiting the algorithmic/dynamic structure of a particular combinational or dynamic system. The first part of Coding Approaches to Fault Tolerance in Combinational and Dynamic Systems focuses on fault-tolerant combinational systems providing a review of von Neumann's classical work on Probabilistic Logics (including some more recent work on noisy gates) and describing the use of arithmetic coding and algorithm-based fault-tolerant schemes in algebraic settings. The second part of the book focuses on fault tolerance in dynamic systems. Coding Approaches to Fault Tolerance in Combinational and Dynamic Systems also discusses how, in a dynamic system setting, one can relax the traditional assumption that the error-correcting mechanism is fault-free by using distributed error correcting mechanisms. The final chapter presents a methodology for fault diagnosis in discrete event systems that are described by Petri net models; coding techniques are used to quickly detect and identify failures. From the Foreword: "Hadjicostis has significantly expanded the setting to processes occurring in more general algebraic and dynamic systems... The book responds to the growing need to handle faults in complex digital chips and complex networked systems, and to consider the effects of faults at the design stage rather than afterwards." George Verghese, Massachusetts Institute of Technology Coding Approaches to Fault Tolerance in Combinational and Dynamic Systems will be of interest to both researchers and practitioners in the area of fault tolerance, systems design and control.

This is a comprehensive guide to fault injection techniques used to evaluate the dependability of a digital system. The description and the critical analysis of different fault injection techniques and tools are authored by key scientists in the field of system dependability and fault tolerance.

Where is system architecture heading? The special interest group on Computer and Systems Architecture (Fachausschuss Rechner- und Systemarchitektur) of the German computer and information technology associations GI and ITG a- ed this question and discussed it during two Future Workshops in 2002. The result in a nutshell: Everything will change but everything else will remain. Future systems technologies will build on a mature basis of silicon and IC technology,onwell-understoodprogramminglanguagesandsoftwareengineering techniques, and on well-established operating systems and middleware concepts. Newer and still exotic but exciting technologies like quantum computing and DNA processing are to be watched closely but they will not be mainstream in the next decade. Although there will be considerable progress in these basic technologies, is there any major trend which uni?es these diverse developments? There is a common denominator – according to the result of the two - ture Workshops – which marks a new quality. The challenge for future systems technologies lies in the mastering of complexity. Rigid and in?exible systems, built under a strict top-down regime, have reached the limits of manageable complexity, as has become obvious by the recent failure of several large-scale projects. Nature is the most complex system we know, and she has solved the problem somehow. We just haven’t understood exactly how nature does it. But it is clear that systems designed by nature, like an anthill or a beehive or a swarm of birds or a city, are di?erent from today’s technical systems that have beendesignedbyengineersandcomputerscientists.

This book constitutes the refereed proceedings of the 7th International Symposium on Self-Stabilizing Systems, SSS 2005, held in Barcelona, Spain, in October 2005. The 15 revised full papers presented were carefully reviewed and selected from 33 submissions. The papers address classical topics of self-stabilization, prevailing extensions to the field, such as snap-stabilization, code stabilization, self-stabilization with either dynamic, faulty or Byzantine components, or deal with applications of self-stabilization, either related to operating systems, security, or mobile and ad hoc networks.

After September 11th, the Department of Defense (DoD) undertook a massive and classified research project to develop new security methods using technology in order to protect secret information from terrorist attacks Written in language accessible to a general technical reader, this book examines the best methods for testing the vulnerabilities of networks and software that have been proven and tested during the past five years An intriguing introductory section explains why traditional security techniques are no longer adequate and which new methods will meet particular corporate and industry network needs Discusses software that automatically applies security technologies when it recognizes suspicious activities, as opposed to people having to trigger the deployment of those same security technologies

The growing complexity of modern software systems increases the di?culty of ensuring the overall dependability of software-intensive systems. Complexity of environments, in which systems operate, high dependability requirements that systems have to meet, as well as the complexity of infrastructures on which they rely make system design a true engineering challenge. Mastering system complexity requires design techniques that support clear thinking and rigorous validation and veri?cation. Formal design methods help to achieve this. Coping with complexity also requires architectures that are t- erant of faults and of unpredictable changes in environment. This issue can be addressed by fault-tolerant design techniques. Therefore, there is a clear need of methods enabling rigorous modelling and development of complex fault-tolerant systems. This bookaddressessuchacuteissues indevelopingfault-tolerantsystemsas: – Veri?cation and re?nement of fault-tolerant systems – Integrated approaches to developing fault-tolerant systems – Formal foundations for error detection, error recovery, exception and fault handling – Abstractions, styles and patterns for rigorousdevelopment of fault tolerance – Fault-tolerant software architectures – Development and application of tools supporting rigorous design of depe- able systems – Integrated platforms for developing dependable systems – Rigorous approaches to speci?cation and design of fault tolerance in novel computing systems TheeditorsofthisbookwereinvolvedintheEU(FP-6)projectRODIN(R- orous Open Development Environment for Complex Systems), which brought together researchers from the fault tolerance and formal methods communi- 1 ties. In 2007 RODIN organized the MeMoT workshop held in conjunction with the Integrated Formal Methods 2007 Conference at Oxford University.

This book presents the theory behind software-implemented hardware fault tolerance, as well as the practical aspects needed to put it to work on real examples. By evaluating accurately the advantages and disadvantages of the already available approaches, the book provides a guide to developers willing to adopt software-implemented hardware fault tolerance in their applications. Moreover, the book identifies open issues for researchers willing to improve the already available techniques.