Communication Protocols

This book provides comprehensive coverage of the protocols of communication systems. The book is divided into four parts. Part I covers the basic concepts of system and protocol design and specification, overviews the models and languages for informal and formal specification of protocols, and describes the specification language SDL. In the second part, the basic notions and properties of communication protocols and protocol stacks are explained, including the treatment of the logical correctness and the performance of protocols. In the third part, many methods for message transfer, on which specific communication protocols are based, are explained and formally specified in the SDL language. The fourth part provides for short descriptions of some specific protocols, mainly used in IP networks, in order to acquaint a reader with the practical use of communication methods presented in the third part of the book. The book is relevant to researchers, academics, professionals and students in communications engineering. Provides comprehensive yet granular coverage of the protocols of communication systems Allows readers the ability to understand the formal specification of communication protocols Specifies communication methods and protocols in the specification language SDL, giving readers practical tools to venture on their own

Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.

Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.

As embedded systems become more and more complex, so does the challenge of enabling fast and efficient communication between the various subsystems that make up a modern embedded system. Facing this challenge from a practical standpoint, Communication Protocol Engineering outlines a hands-on methodology for developing effective communication protocols for large-scale systems. A Complete Roadmap This book brings together the leading methods and techniques developed from state-of-the-art methodologies for protocol engineering, from specification and description methods to cleanroom engineering and agile methods. Popovic leads you from conceptualization of requirements to analysis, design, implementation, testing, and verification. He covers the four main design languages: specifications and description language (SDL); message sequence charts (MSCs); tree and tabular combined notation (TTCN); and unified modeling language (UML). Practical Tools for Real Skills Fully illustrated with more than 150 figures, this guide also serves as a finite state machine (FSM) library programmer's reference manual. The author demonstrates how to build an FSM library, explains the components of such a library, and applies the principles to FSM library-based examples. Nowhere else are the fundamental principles of communication protocols so clearly and effectively applied to real systems development than in Communication Protocol Engineering. No matter in what stage of the process you find yourself, this is the ideal tool to make your systems successful.

This SpringerBrief presents the design and performance evaluation of communication protocols based on dissimilarity metrics for wireless multihop networks. Dissimilarity metrics are used to infer the network topology based solely on local information to efficiently disseminate packets throughout the network, reducing both redundancy and congestion which is covered in this brief. The performance evaluation of the proposed communication protocols has been conducted by both meticulous simulation and real experimentation in a wireless multi-hop testbed. The obtained results in this brief corroborate the hypothesis regarding the validity of dissimilarity metrics, which can be used to design efficient communication protocols. This SpringerBrief is a good starting point for advanced-level students studying computer science and electrical engineering, as well as researchers and professionals working in this field.

Sensor networks continue to grow in importance for modern communication networks. Communication protocols are at the core of these networks, determining their ability to function, their capabilities, and the environments in which they are able to operate. In chapters carefully selected from the popular Handbook of Sensor Networks, Sensor Network Protocols supplies a sharply focused reference on protocols, security, data processing, and energy management in communication sensor networks that is ideal for specialists in the field. Providing a succinct guide to the protocols currently used in advanced sensor networks, this book focuses on four main areas: routing protocols; data gathering and processing; security and reliability; and energy management. The book opens with a survey of the challenges and opportunities facing the field. Then, expert contributors authoritatively discuss routing technologies, next-generation enabling technologies, comparative study of energy-efficient protocols for wireless sensor networks, techniques to reduce computation and communication energy consumption, energy-aware routing, localized algorithms for sensor networks, and much more. Sensor Network Protocols details the techniques and technologies that are at the heart of modern sensor networks. It is an ideal reference for anyone interested in designing, planning, or building emerging sensor and communications networks.

Get to grips with network-based attacks and learn to defend your organization's network and network devices Key FeaturesExploit vulnerabilities and use custom modules and scripts to crack authentication protocolsSafeguard against web, mail, database, DNS, voice, video, and collaboration server attacksMonitor and protect against brute-force attacks by implementing defense mechanismsBook Description With the increased demand for computer systems and the ever-evolving internet, network security now plays an even bigger role in securing IT infrastructures against attacks. Equipped with the knowledge of how to find vulnerabilities and infiltrate organizations through their networks, you'll be able to think like a hacker and safeguard your organization's network and networking devices. Network Protocols for Security Professionals will show you how. This comprehensive guide gradually increases in complexity, taking you from the basics to advanced concepts. Starting with the structure of data network protocols, devices, and breaches, you'll become familiar with attacking tools and scripts that take advantage of these breaches. Once you've covered the basics, you'll learn about attacks that target networks and network devices. Your learning journey will get more exciting as you perform eavesdropping, learn data analysis, and use behavior analysis for network forensics. As you progress, you'll develop a thorough understanding of network protocols and how to use methods and tools you learned in the previous parts to attack and protect these protocols. By the end of this network security book, you'll be well versed in network protocol security and security countermeasures to protect network protocols. What you will learnUnderstand security breaches, weaknesses, and protection techniquesAttack and defend wired as well as wireless networksDiscover how to attack and defend LAN-, IP-, and TCP/UDP-based vulnerabilitiesFocus on encryption, authorization, and authentication principlesGain insights into implementing security protocols the right wayUse tools and scripts to perform attacks on network devicesWield Python, PyShark, and other scripting tools for packet analysisIdentify attacks on web servers to secure web and email servicesWho this book is for This book is for red team and blue team pentesters, security professionals, or bug hunters. Anyone involved in network protocol management and security will also benefit from this book. Basic experience in network security will be an added advantage.

Your one-step guide to understanding industrial cyber security, its control systems, and its operations. About This Book Learn about endpoint protection such as anti-malware implementation, updating, monitoring, and sanitizing user workloads and mobile devices Filled with practical examples to help you secure critical infrastructure systems efficiently A step-by-step guide that will teach you the techniques and methodologies of building robust infrastructure systems Who This Book Is For If you are a security professional and want to ensure a robust environment for critical infrastructure systems, this book is for you. IT professionals interested in getting into the cyber security domain or who are looking at gaining industrial cyber security certifications will also find this book useful. What You Will Learn Understand industrial cybersecurity, its control systems and operations Design security-oriented architectures, network segmentation, and security support services Configure event monitoring systems, anti-malware applications, and endpoint security Gain knowledge of ICS risks, threat detection, and access management Learn about patch management and life cycle management Secure your industrial control systems from design through retirement In Detail With industries expanding, cyber attacks have increased significantly. Understanding your control system's vulnerabilities and learning techniques to defend critical infrastructure systems from cyber threats is increasingly important. With the help of real-world use cases, this book will teach you the methodologies and security measures necessary to protect critical infrastructure systems and will get you up to speed with identifying unique challenges.Industrial cybersecurity begins by introducing Industrial Control System (ICS) technology, including ICS architectures, communication media, and protocols. This is followed by a presentation on ICS (in) security. After presenting an ICS-related attack scenario, securing of the ICS is discussed, including topics such as network segmentation, defense-in-depth strategies, and protective solutions. Along with practical examples for protecting industrial control systems, this book details security assessments, risk management, and security program development. It also covers essential cybersecurity aspects, such as threat detection and access management. Topics related to endpoint hardening such as monitoring, updating, and anti-malware implementations are also discussed. Style and approach A step-by-step guide to implement Industrial Cyber Security effectively.