Constructing Three Dimensional Architectures To Design Advanced Anodes Materials For Sodium Ion Batteries From Nanoscale To Microscale

Sodium-ion batteries (SIBs) are emerging as a possible substitute for lithium-ion batteries (LIBs) in low-cost and large-scale electrochemical energy storage systems owing to the lack of lithium resources. The properties of SIBs are correlated to the electrode materials, while the performance of electrode materials is significantly affected by the morphologies. In recent years, several kinds of anode materials involving carbon-based anodes, titanium-based anodes, conversion anodes, alloy-based anodes, and organic anodes have been systematically researched to develop high-performance SIBs. Nanostructures have huge specific surface areas and short ion diffusion pathways. However, the excessive solid electrolyte interface film and worse thermodynamic stability hinder the application of nanomaterials in SIBs. Thus, the strategies for constructing three-dimensional (3D) architectures have been developed to compensate for the flaws of nanomaterials. This review summarizes recent achievements in 3D architectures, including hollow structures, core-shell structures, yolk-shell structures, porous structures, and self-assembled nano/micro-structures, and discusses the relationship between the 3D architectures and sodium storage properties. Notably, the intention of constructing 3D architectures is to improve materials performance by integrating the benefits of various structures and components. The development of 3D architecture construction strategies will be essential to future SIB applications.

Globally, lithium ion batteries (LIBs) are leaders in the energy storage sector but there are concerns regarding load leveling of renewable energy sources as well as smart grids and limited availability of lithium resources resulting in cost increase. Therefore, sodium ion batteries (SIBs) are being researched as next-generation alternatives to LIBs due to their similar sustainability and electrochemistry. This book mainly focuses on the current research on electrode materials and proposes future directions for SIBs to meet the current challenges associated with the full cell aspect. Further, it provide insights into scientific and practical issues in the development of SIBs.

Sodium-ion batteries are likely to be the next-generation power sources. They offer higher safety than lithium-ion batteries and, most important, sodium is available in unlimited abundance. The book covers the fundamental principles and applications of sodium-ion batteries and reports experimental work on the use of electrolytes and different electrode materials, such as silicon, carbon, conducting polymers, and Mn- and Sn-based materials. Also discussed are state-of-the-art, future prospects and challenges in sodium-ion battery technology. Keywords: Sodium-Ion Batteries, Lithium-Ion Batteries, Carbon Nanofibers, Conducting Polymers, Electrode Materials, Electrolytes, Graphene, Carbon Anodes, Magnetic Nanomaterials, Mn-based Materials, Sn-based Materials, Na-O2 Batteries, NASICON Electrodes, Organic Electrodes, Polyacetylene, Polyaniline, Polyphenylene, Redox Mediators, Reversible Capacity, Singlet Oxygen, Superoxide Stability.

This book provides an in-depth coverage of basic theories, progress and applications of sodium-ion batteries, and introduces the various technologies and mechanisms for anodes, cathodes, and electrolytes. In addition, this book gives insight into industrial applications of sodium-ion batteries.

Electrochemical energy storage has played important roles in energy storage technologies for portable electronics and electric vehicle applications. During the past thirty years, great progress has been made in research and development of various batteries, in term of energy density increase and cost reduction. However, the energy density has to be further increased to achieve long endurance time. In this book, recent research and development in advanced electrode materials for electrochemical energy storage devices are presented, including lithium ion batteries, lithium-sulfur batteries and metal-air batteries, sodium ion batteries and supercapacitors. The materials involve transition metal oxides, sulfides, Si-based material as well as graphene and graphene composites.

Research on deformable and wearable electronics has promoted an increasing demand for next-generation power sources with high energy/power density that are low cost, lightweight, thin and flexible. One key challenge in flexible electrochemical energy storage devices is the development of reliable electrodes using open-framework materials with robust structures and high performance. Based on an exploration of 3D porous graphene as a flexible substrate, this book constructs free-standing, binder-free, 3D array electrodes for use in batteries, and demonstrates the reasons for the research transformation from Li to Na batteries. It incorporates the first principles of computational investigation and in situ XRD, Raman observations to systematically reveal the working mechanism of the electrodes and structure evolution during ion insertion/extraction. These encouraging results and proposed mechanisms may accelerate further development of high rate batteries using smart nanoengineering of the electrode materials, which make “Na ion battery could be better than Li ion battery” possible.

This book highlights the use of one-dimensional transition metal oxides and their analogue nanomaterials for battery applications. The respective chapters present examples of one-dimensional nanomaterials with different architectures, as well as a wide range of applications, e.g. as electrode materials for batteries. The book also addresses various means of synthesizing one-dimensional nanomaterials, e.g. electrospinning, the Kirkendall effect, Ostwald ripening, heterogeneous contraction, liquid-phase preparation, the vapor deposition approach and template-assisted synthesis. In closing, the structural design, optimization and promotion of one-dimensional transition metal oxide electrode materials are discussed. The book chiefly focuses on emerging configurable designs, including core-shell architectures, hollow architectures and other intricate architectures. In turn, the applications covered reflect essential recent advances in many modern types of battery. Accordingly, the book offers an informative and appealing resource for a wide readership in various fields of chemical science, materials and engineering.

Offers the first comprehensive account of this interesting and growing research field Printed Batteries: Materials, Technologies and Applications reviews the current state of the art for printed batteries, discussing the different types and materials, and describing the printing techniques. It addresses the main applications that are being developed for printed batteries as well as the major advantages and remaining challenges that exist in this rapidly evolving area of research. It is the first book on printed batteries that seeks to promote a deeper understanding of this increasingly relevant research and application area. It is written in a way so as to interest and motivate readers to tackle the many challenges that lie ahead so that the entire research community can provide the world with a bright, innovative future in the area of printed batteries. Topics covered in Printed Batteries include, Printed Batteries: Definition, Types and Advantages; Printing Techniques for Batteries, Including 3D Printing; Inks Formulation and Properties for Printing Techniques; Rheological Properties for Electrode Slurry; Solid Polymer Electrolytes for Printed Batteries; Printed Battery Design; and Printed Battery Applications. Covers everything readers need to know about the materials and techniques required for printed batteries Informs on the applications for printed batteries and what the benefits are Discusses the challenges that lie ahead as innovators continue with their research Printed Batteries: Materials, Technologies and Applications is a unique and informative book that will appeal to academic researchers, industrial scientists, and engineers working in the areas of sensors, actuators, energy storage, and printed electronics.