Construction Materials Handling And Storage

Construction Materials Handling and Storage on Site provides advice and guidance for practically controlling materials on construction sites. It addresses the wide variety of standards, misunderstandings and poor techniques that impair the optimum storage and safe handling of construction materials. It shows how to plan where to place materials, create compounds and storage areas to ensure materials are kept in the best possible condition to minimise waste and facilitate easy access and distribution on site. Safe handling procedures, material security and segregation of waste materials on site are also fully covered. The book includes specific advice and information for a wide range of construction materials and products, formatted as data sheets, to ensure easy access to information that will be required regularly.

Site Control of Materials: Handling, Storage and Protection deals with improving control in construction sites to limit waste resulting from improper storage and handling of valuable or fragile materials. According to the Building Research Establishment in the United Kingdom, 10-20% of all materials delivered to the construction site either end up as waste or are illegally removed during the contract. Bigger construction contracts such as in housing developments require new kinds of materials in larger volumes and new construction techniques, leading to increases in waste. To be able to lessen wastage, site management must 1) anticipate the progress and problems of construction; 2) control men and materials with equal efficiency; 3) complete the contract within the programmed period; and 4) carry out the work according to specification. The book explains in detail the procedures for obtaining materials, materials handing (including unit loads, pallets, deliveries, offloading), storage (stockpile arrangements, protection, facilities, withdrawals), as well as implementing stock controls on sites (coordination, transfer, accounting). The text also addresses prevention of on-site damages through site supervision, out-of-hours supervision, and installing fire precautions. The book should prove valuable for construction engineers, foremen, project managers, plant administrators, warehouse keepers, and other personnel connected with materials handling, their storage or safekeeping.

Sponsored jointly by the American Society of Mechanical Engineers and International Material Management Society, this single source reference is designed to meet today's need for updated technical information on planning, installing and operating materials handling systems. It not only classifies and describes the standard types of materials handling equipment, but also analyzes the engineering specifications and compares the operating capabilities of each type. Over one hundred professionals in various areas of materials handling present efficient methods, procedures and systems that have significantly reduced both manufacturing and distribution costs.

This book points out the safety and health concerns as well as the regulatory requirements for safe material handling. Many material handling venues are discussed from cranes to industrial robots. This diverse approach to material handling safety will be of interest to those who are responsible for safety or having material handling as a major component of their operation.

This much anticipated new edition provides employers and employees with a day-to-day guide to reducing accidents and injuries, ensuring compliance, avoiding fines and penalties, and controlling workers' compensation costs. You'll not only find comprehensive discussions on all of the construction safety regulations found in the Code of Federal Regulations (CFR) Title 29 Chapter 1926, but you'll also find the actual legal text of the regulations and overviews for each sub Chapter for easier reference. This Construction Safety Handbook covers both the obvious and the hidden dangers of construction and addresses the latest changes in OSHA standards, including new recordkeeping requirements, new ergonomic guidelines, new requirements in the Steel Erection standard, and new additions to signs, signals, and barricades requirements. Written in plain English, this comprehensive handbook provides you with the legal background, practical advice, and ready-to-use written compliance programs you need to ensure your sites meet workplace safety requirements, protect workers, and comply with the standards. Each Chapter provides a description of the requirements of the standard, and a sample written compliance program, checklists, and the appropriate citations from the 29 CFRs. The latest changes in enforcement and inspection policy are also detailed, and a list of OSHA's most frequently cited construction standards is given.