Corrosion Management Of Seawater Cooling Systems

Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. Covers key technological developments in corrosion management of seawater cooling systems Includes coverage of seawater heat exchangers“/li> Provides information on many different forms of corrosion Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) Discusses maintenance, control, monitoring and inspection

This book elaborates the corrosion testing and assessment methods for the aluminum alloy vessel in the service and internal environment. The emphasis is placed on the research of general materials corrosion characteristics, electrochemical protection design, surface protection, coating and painting, etc. This book helps readers to keep abreast of the whole technology system of the corrosion prevention and control of aluminum alloy vessel, especially the systematic engineering view of life cycle corrosion control for the vessel is of particular interest to readers.

This book comprehensively covers corrosion and corrosion protection in China in the areas including infrastructure, transportation, energy, water environment, as well as manufacturing and public utilities. Furthermore, it presents a major consulting project of Chinese Academy of Engineering, which was the largest corrosion investigation project in Chinese history, including the corresponding methods, processes and corrosion protection strategies, and provides valuable information for numerous industries. Sharing essential insights into corrosion prediction and decision-making, this book will help to decrease costs and extend the service life of equipment and facilities; accordingly, it will benefit scientists and engineers working on corrosion research and protection, as well as economists and government employees.

Heat Exchangers: Operation, Performance, and Maintenance, Third Edition covers heat exchanger installation, commissioning and operation, and maintenance and performance monitoring in service. Focusing on in-service issues like flow-induced vibration, corrosion, and corrosion control, and fouling and fouling control, the book explores performance deterioration in service, maintenance issues, defects, tube failures, and how to detect these issues with NDT methods. It discusses various cleaning processes and repair methods. The book also considers boilers, utility boilers, coal-based thermal power plants, boiler corrosion, and boiler degradation mechanisms. It discusses different types of cooling systems, feedwater treatment, deaerators, feedwater heaters, economizers, condensers, cooling towers, and cooling-water management. The book serves as a useful reference for researchers, graduate students, power plant engineers, and engineers in the field of heat exchanger design, including pressure vessel manufacturers.

The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Smart Protective Coatings for Corrosion Control Overview of the latest research in advanced coatings for anticorrosion and the development of optimized surfaces with high anticorrosion ability Smart Protective Coatings for Corrosion Control introduces the newest research developments in self-healing coatings, self-reporting coatings, and superhydrophobic coatings, reviewing corrosion processes and strategies, smart coatings for corrosion protection, techniques for synthesizing and applying smart coatings, different kinds of self-healing and self-reporting coatings activated by different environmental stimuli, and current and future trends of protective coatings for automotive, aerospace, marine, nuclear, oil/gas, and military applications. This book also discusses new ideas in the field, such as the combination of self-healing and self-reporting properties, new techniques to study localized microscale electrochemical corrosion behavior, as well as atmospheric corrosion monitor technique to study the real-time protection behavior of coatings in different environments. The processes of coating degradation and metal corrosion are discussed in detail so that non-experts can gain a basic understanding of the corrosion protection techniques. Written by two highly qualified academics with significant research experience in the field, Smart Protective Coatings for Corrosion Control includes information on: Coating preparation, filler preparation, surface characterization, macroscopic and microscopic electrochemical properties, and self-healing performance of self-healing coating systems under different environmental stimuli Photothermal conversion species such as graphene oxide, titanium nitride, and Fe3O4 Different types of corrosion indicators, such as phenolphthalein, sulfosalicylic acid-modified carbon dots, and phenanthroline High-mobility polymer networks that endow a shape memory effect and allow coatings to recover their original shape and barrier properties Solutions to three corrosion conditions—room temperature immersion, alternating wet-dry, and outdoor atmospheric exposure conditions Presenting the latest research in the field, Smart Protective Coatings for Corrosion Control is a practical and highly valuable reference on the subject for scientists, researchers, and students in diverse programs of study.