Deformation Mechanisms Texture And Anisotropy In Zirconium And Zircaloy

This work presents papers from a December 2005 symposium held in Norfolk, Virginia, and sponsored by ASTM Committee D2 on Petroleum Products and Lubricants and its Subcommittees D02.09 on Oxidation and D02.C0 on Turbine Oils. Contributors include equipment manufacturers, end users, lubricant producers, lubricant additive suppliers, test equipment manufacturers, and standard test method developers. They share information on industry trends, evolving technologies, and changing equipment designs and operating conditions, with a focus on how these factors impact oxidation. Some topics covered include turbine oil performance limits, a new form of the rotating pressure vessel oxidation test, and degradation mechanisms leading to sludge and varnish in modern turbine oil formulations. B&w photos are included. There is no subject index. Migdal is affiliated with Chemtura Corporation.

The proceedings of the Ninth International Symposium on [title], held in Kobe, Japan, November 1990, address current trends in the development, performance, and fabrication of zirconium alloys for nuclear power reactors. the bulk of the most recent work on zirconium alloy behavior has concerned corr

Light water reactors (LWRs) are the predominant class of nuclear power reactors in operation today; however, ageing and degradation can influence both their performance and lifetime. Knowledge of these factors is therefore critical to safe, continuous operation. Materials ageing and degradation in light water reactors provides a comprehensive guide to prevalent deterioration mechanisms, and the approaches used to handle their effects. Part one introduces fundamental ageing issues and degradation mechanisms. Beginning with an overview of ageing and degradation issues in LWRs, the book goes on to discuss corrosion in pressurized water reactors and creep deformation of materials in LWRs. Part two then considers materials’ ageing and degradation in specific LWR components. Applications of zirconium alloys in LWRs are discussed, along with the ageing of electric cables. Materials management strategies for LWRs are then the focus of part three. Materials management strategies for pressurized water reactors and VVER reactors are considered before the book concludes with a discussion of materials-related problems faced by LWR operators and corresponding research needs. With its distinguished editor and international team of expert contributors, Materials ageing and degradation in light water reactors is an authoritative review for anyone requiring an understanding of the performance and durability of this type of nuclear power plant, including plant operators and managers, nuclear metallurgists, governmental and regulatory safety bodies, and researchers, scientists and academics working in this area. Introduces the fundamental ageing issues and degradation mechanisms associated with this class of nuclear power reactors Considers materials ageing and degradation in specific light water reactor components, including properties, performance and inspection Chapters also focus on material management strategies

Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.

Recrystallization shows selected results obtained during the last few years by scientists who work on recrystallization-related issues. These scientists offer their knowledge from the perspective of a range of scientific disciplines, such as geology and metallurgy. The authors emphasize that the progress in this particular field of science is possible today thanks to the coordinated action of many research groups that work in materials science, chemistry, physics, geology, and other sciences. Thus, it is possible to perform a comprehensive analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it ends with modeling of phenomena.

The book Recrystallization in Materials Processing shows selected results obtained during the last few years by researchers worked on recrystallization-related issues. These researchers offer their knowledge from a range of scientific disciplines, such as materials science, metallurgy and pharmacology. The authors emphasize that the progress in this particular field of scientific research is possible today due to coordinated efforts of many research groups that work in materials science, chemistry, physics, pharmacology, and other sciences. Thus, it is possible to perform a detailed analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it finished with physical modeling of phenomena.