Electromagnetic Well Logging

Theory of Electromagnetic Well Logging provides a much-needed and complete analytical method for electromagnetic well logging technology. The book presents the physics and mathematics behind the effective measurement of rock properties using boreholes, allowing geophysicists, petrophysisists, geologists and engineers to interpret them in a more rigorous way. Starting with the fundamental concepts, the book then moves on to the more classic subject of wireline induction logging, before exploring the subject of LWD logging, concluding with new thoughts on electromagnetic telemetry. Theory of Electromagnetic Well Logging is the only book offering an in-depth discussion of the analytical and numerical techniques needed for expert use of those new logging techniques. Features in-depth analysis of the analytical and numerical techniques needed for expert use of logging techniques Includes software codes, providing a handy tool for understanding logging tool physics and design of new logging tools Provides a detailed glossary of all key terms within the introductory chapter

Mathematically rigorous, computationally fast, and easy to use, this new approach to electromagnetic well logging gives the reservoir engineer a new dimension to MWD/LWD interpretation and tool design Almost all publications on borehole electromagnetics deal with idealizations that are not acceptable physically. On the other hand, “exact models” are only available through detailed finite element or finite difference analysis, and more often than not, simply describe case studies for special applications. In either case, the models are not available for general use and the value of the publications is questionable. This new approach provides a rigorous, fully three-dimensional solution to the general problem, developed over almost two decades by a researcher familiar with practical applications and mathematical modeling. Completely validated against exact solutions and physics-based checks through over a hundred documented examples, the self-contained model (with special built-in matrix solvers and iteration algorithms) with a “plain English graphical user interface” has been optimized to run extremely fast – seconds per run as opposed to minutes and hours – and then automatically presents all electric and magnetic field results through integrated three-dimensional color graphics. In addition to state-of-the-art algorithms, basic "utility programs" are also developed, such as simple dipole methods, Biot-Savart large diameter models, nonlinear phase and amplitude interpolation algorithms, and so on. Incredibly useful to oilfield practitioners, this volume is a must-have for serious professionals in the field, and all the algorithms have undergone a laborious validation process with real use in the field.

Basic Principles of Induction Logging provides geoscientists with the information required to survey the electrical conductivity of rocks surrounding a borehole. The formation conductivity distribution in the borehole vicinity is critical information required in formation evaluation and geosteering applications. Developing a theory of EM logging and on understanding basic physics for both wireline and LWD logging tools, this reference furnishes valuable insights for development and use of EM techniques in practical logging applications. Basic Principles of Induction Logging will be vital for anyone attempting to investigate, invent, and develop the next generation of EM logging tools. It will provide information required to enable operation in more challenging environments such as logging while drilling, anisotropic and thinly laminated formations, high angle and horizontal wells. Provides a step-by-step approach to the theory of electromagnetic methods in borehole applications starting from the simplest models Presents theory on the subject that has been previously hard to find, making this a must have reference for anyone working in the field Delivers a much needed update on the latest analysis methods, modelling techniques, drilling environments, and probe configurations

Basic Principles of Induction Logging provides geoscientists with the information required to survey the electrical conductivity of rocks surrounding a borehole. The formation conductivity distribution in the borehole vicinity is critical information required in formation evaluation and geosteering applications. Developing a theory of EM logging and on understanding basic physics for both wireline and LWD logging tools, this reference furnishes valuable insights for development and use of EM techniques in practical logging applications. Basic Principles of Induction Logging will be vital for anyone attempting to investigate, invent, and develop the next generation of EM logging tools. It will provide information required to enable operation in more challenging environments such as logging while drilling, anisotropic and thinly laminated formations, high angle and horizontal wells.

The monograph introduces the reader to the world of inductive well logging - an established method for surveying the electrical conductivity of rocks surrounding a borehole. The emphasis is on developing a theory of inductive logging and on understanding logging tools basic physics, since this theory and understanding furnish valuable insights for inventing practical induction logging techniques. The first chapter of the book presents the basic laws of electromagnetism from a point of view that will facilitate the application of the theory to problems in electromagnetic logging. Many topics that play an important role in the design and interpretation of tools readings are covered. The vertical resolution and radial depth of investigation of different induction tools is systematically considered. Special attention is paid to principles of induction logging with transversal induction coils, to transient method of induction logging in media with cylindrical and horizontal interfaces and to the influence of anisotropy on the electromagnetic field measured in a conducting medium. Multi-coil differential induction probes and induction logging based on measuring the inphase component of the secondary field or the quadrature component difference are also described in detail. The last chapter is devoted to mathematical modeling of the response of induction logging tools in 3D geometries. The theory of inductive logging presented in this volume can be applied to logging after drilling as well as logging while drilling.

This book presents a comprehensive introduction to well logging and the inverse problem. It explores challenges such as conventional data processing methods’ inability to handle local minima issues, and presents the explanations in an easy-to-follow way. The book describes statistical data interpretation by introducing the fundamentals behind the approach, as well as a range of sampling methods. In each chapter, a specific method is comprehensively introduced, together with representative examples. The book begins with basic information on well logging and logging while drilling, as well as a definition of the inverse problem. It then moves on to discuss the fundamentals of statistical inverse methods, Bayesian inference, and a new sampling method that can be used to supplement it, the hybrid Monte Carlo method. The book then addresses a specific problem in the inversion of downhole logging data, and the interpretation of earth model complexity, before concluding with a meta-technique called the tempering method, which serves as a supplement to statistical sampling methods. Given its scope, the book offers a valuable reference guide for drilling engineers, well logging tool physicists, and geoscientists, as well as students in the areas of petroleum engineering and electrical engineering.

Wave propagation is central to all areas of petroleum engineering, e.g., drilling vibrations, MWD mud pulse telemetry, swab-surge, geophysical ray tracing, ocean and current interactions, electromagnetic wave and sonic applications in the borehole, but rarely treated rigorously or described in truly scientific terms, even for a single discipline. Wilson Chin, an MIT and Caltech educated scientist who has consulted internationally, provides an integrated, comprehensive, yet readable exposition covering all of the cited topics, offering insights, algorithms and validated methods never before published. A must on every petroleum engineering bookshelf! In particular, the book: Delivers drillstring vibrations models coupling axial, torsional and lateral motions that predict rate-of-penetration, bit bounce and stick-slip as they depend on rock-bit interaction and bottomhole assembly properties, Explains why catastrophic lateral vibrations at the neutral point cannot be observed from the surface even in vertical wells, but providing a proven method to avoid them, Demonstrates why Fermat's "principle of least time" (used in geophysics) applies to non-dissipative media only, but using the "kinematic wave theory" developed at MIT, derives powerful methods applicable to general attenuative inhomogeneous media, Develops new approaches to mud acoustics and applying them to MWD telemetry modeling and strong transients in modern swab-surge applicagtions, Derives new algorithms for borehole geophysics interpretation, e.g., Rh and Rv in electromagnetic wave and permeability in Stoneley waveform analysis, and Outlines many more applications, e.g., wave loadings on offshore platforms, classical problems in wave propagation, and extensions to modern kinematic wave theory. These disciplines, important to all field-oriented activities, are not treated as finite element applications that are simply gridded, "number-crunched" and displayed, but as scientific disciplines deserving of clear explanation. General results are carefully motivated, derived and applied to real-world problems, with results demonstrating the importance and predictive capabilities of the new methods.

This hand guide in the Gulf Drilling Guides series offers practical techniques that are valuable to petrophysicists and engineers in their day-to-day jobs. Based on the author’s many years of experience working in oil companies around the world, this guide is a comprehensive collection of techniques and rules of thumb that work. The primary functions of the drilling or petroleum engineer are to ensure that the right operational decisions are made during the course of drilling and testing a well, from data gathering, completion and testing, and thereafter to provide the necessary parameters to enable an accurate static and dynamic model of the reservoir to be constructed. This guide supplies these, and many other, answers to their everyday problems. There are chapters on NMR logging, core analysis, sampling, and interpretation of the data to give the engineer a full picture of the formation. There is no other single guide like this, covering all aspects of well logging and formation evaluation, completely updated with the latest techniques and applications. · A valuable reference dedicated solely to well logging and formation evaluation. · Comprehensive coverage of the latest technologies and practices, including, troubleshooting for stuck pipe, operational decisions, and logging contracts. · Packed with money-saving and time saving strategies for the engineer working in the field.