Embedded Mechatronic Systems

Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives. The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Embedded Mechatronic Systems 1, Second Edition presents two methodologies: the statistical approach to the design optimization by reliability and the experimental approach for the characterization of the development of mechatronic systems in operating mode. It also analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses. Presents a statistical approach to the design optimization by reliability It presents an experimental approach for the characterization of the development of mechatronic systems in operating mode The book analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses

In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components which induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests This book helps you to: Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices Develop ways to characterize physical and chemical phenomena Identify mechanisms of failure of components of these devices Analyze the physical and chemical mechanisms of failure, in order of importance Model failure mechanisms and design optimization

Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests.

The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives.The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Provides a statistical approach to design optimization through reliability Presents an experimental approach for the characterization of the development of mechatronic systems in operating mode Analyzes new tools that effect thermal, vibratory, humidity, electric and electromagnetic stresses