Enhancing System Reliability Through Vibration Technology

In order to identify unusual vibration occurrences and assess the general health of the test object, vibration analysis is a procedure that tracks vibration levels and looks into the patterns in vibration signals within a component, piece of equipment, or building. It is frequently conducted on both the frequency spectrum, which is derived by applying Fourier Transform to the time waveform, as well as the time waveforms of the vibration signal directly. Mechanical vibration Analysis should present 50% of any condition monitoring program. This book include a practical guide to vibration analysis to prepare practitioners for levels I II & III to become certified analyst. Numerous examples with photos are included to present how to detect different types of equipment and assets failure include: bearing, shafts misalignment, unbalance, rotor problems, electric motors and more using spectrum analysis technique.

Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. Understand the basics of vibration measurement Apply vibration analysis for different machinery faults Diagnose machinery-related problems with vibration analysis techniques

"Written for vibration analysts, predictive maintenance specialists, field mechanics, and a wide variety of engineers, Vibration Spectrum Analysis assumes no prior knowledge of advanced mathematics or mechanical engineering. It carefully guides the reader through sophisticated analysis techniques in a logical, easy-to-understand manner."--BOOK JACKET.

"Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.

Condition monitoring is the process of keeping an eye on a machine's condition parameter in order to spot any major changes that could be signs of a malfunction developing. It plays a significant role in preventive maintenance and is a major component of predictive maintenance. By combining machine sensor data that detects vibration and other characteristics (in real-time) with cutting-edge machine monitoring software, condition monitoring (CM), a maintenance strategy, anticipates machine health and safety. Predictive Maintenance strategy employs vibration analysis, thermography analysis, ultrasound analysis, oil analysis and other techniques to improve machine reliability. The goal of the strategy is to provide the stated function of the facility, with the required reliability and availability at the lowest cost.

Maintaining the outstanding features and practical approach that led the bestselling first edition to become a standard textbook in engineering classrooms worldwide, Clarence de Silva's Vibration: Fundamentals and Practice, Second Edition remains a solid instructional tool for modeling, analyzing, simulating, measuring, monitoring, testing, control