Erosion In Geomechanics Applied To Dams And Levees

Erosion is the most common cause of failures at earth-dams, dikes and levees, whether through overtopping and overflowing, or internal erosion and piping. This book is dedicated to the phenomenon of internal erosion and piping. It is not intended to be exhaustive on the subject, but brings together some of the latest international research and advances. Emphasis is placed on physical processes, how they can be studied in the laboratory, and how test results can be applied to levees and dams. The results from several research projects in Australia, France, the Netherlands and the United States are covered by the authors. Our aim has been to share our most recent findings with students, researchers and practitioners. Understanding the failure of an earth-dam or a levee by erosion in a unified framework, whether internal erosion or surface erosion, requires continuous research in this field. We hope that the reader will gain knowledge from this book that leads to further progress in the challenging field of the safety of levees and dams. Contents 1. State of The Art on the Likelihood of Internal Erosion of Dams and Levees by Means of Testing, Robin Fell and Jean-Jacques Fry. 2. Contact Erosion, Pierre Philippe, Rémi Beguin and Yves-Henri Faure. 3. Backward Erosion Piping, Vera Van Beek, Adam Bezuijen and Hans Sellmeijer. 4. Concentrated Leak Erosion, Stéphane Bonelli, Robin Fell and Nadia Benahmed. 5. Relationship between the Erosion Properties of Soils and Other Parameters, Robin Fell, Gregory Hanson, Gontran Herrier, Didier Marot and Tony Wahl. About the Authors Stéphane Bonelli is a Research Professor at Irstea (French Environmental Sciences and Technologies Research Institute) in Aix-en-Provence, France. He has over 20 years of teaching and research experience, and has been a member of the ICOLD (International Commission on Large Dams) European Working Group on Internal Erosion since 2005. He has participated in 19 large dam reviews in France (visual inspection, monitoring data analysis and numerical modeling). His current activities include research, teaching and consultancy, focusing on soil erosion and the processes of levee breach.

Internal erosion and piping in embankments and their foundations is the main cause of failures and accidents to embankment dams. For new dams, the potential for internal erosion and piping can be controlled by good design and construction of the core of the dam and provision of filters to intercept seepage through the embankment and the foundations. This book presents selected and reviewed papers from the Workshop on Internal Erosion and Piping of Dams and their Foundations, which was held from 25 to 27 April, 2005 in Aussois, France. The book covers the whole internal erosion process, from initiation of erosion, continuation, progression to form a pipe, and formation of a breach. An overview paper based on the papers and discussion at the Workshop describes the state of the art and research needs. Internal Erosion of Dams and their Foundations will be most valuable to dam engineers, researchers and students who are involved in assessing the safety of embankment dams from internal erosion and piping.

This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

This book aims to deliver significant scientific progress on the problem of the erosion of geomaterials, focusing on the mechanical/physical aspect. The chapters oscillate between a phenomenological outlook that is well grounded in experiments, and an approach that can offer a modeling framework. The basic mechanisms of internal and surface erosion are tackled one-by-one: filtration, suffusion, contact erosion, concentrated leak erosion, sediment and wind transport, bedload transport. These erosion mechanisms comprise both hydraulic structures (dams, dikes) and natural environments (wind, river, coastal). In this book, physicists and mechanicians share with the reader their most recent findings in their field work and study, while at the same time maintaining an accessible format. This compendium provides a well-documented information resource, and above all, a tool for approaching the issue of erosion of geomaterials in an up-to-date fashion for students, researchers and practitioners alike.

The 7th International Conference on Scour and Erosion (ICSE 2014) was organised by the School of Civil, Environmental and Mining Engineering and the Centre for Offshore Foundation Systems at the University of Western Australia under the guidance of the Technical Committee 213 for Scour and Erosion of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE). This biennial conference draws together leading academics, scientists and engineers engaged in scour and erosion research to present and exchange their latest scientific findings. These proceedings, together with the six previous proceedings dating from 2002, present a rare collection of technical and scientific developments in scour and erosion research which have been established over the last 12 years. This book includes state-of-the-art papers in scour and erosion from ICSE 2014, covering the 6 themes of: internal erosion, sediment transport, advanced numerical modelling of scour and erosion, terrestrial scour and erosion, river/bridge scour and erosion, and marine scour and erosion. The proceedings include 5 keynote lectures from world leading researches cutting across the themes of scour and erosion, together with 87 peer-reviewed papers from 19 countries. This book is ideal for researchers and industry working at the forefront of scour and erosion, both with application to rivers and marine operations.

This book contains the best papers accepted for presentation at the 3rd Springer Conference of the Arabian Journal of Geosciences (CAJG-3). The book is divided into three parts to distinguish research studies from the fields of (1) geological and geotechnical engineering, (2) geomechanical studies based on numerical and analytical methods, and (3) geo-informatics and remote sensing. The content of these papers provides new scientific knowledge for further understanding on landslides, new stabilization techniques, importance of geophysics for engineering geology investigations as well as new empirical approaches for easily predicting some physical and hydrogeomechanical properties of geomaterials. It also sheds the light on usage of different remote sensing technologies, mapping techniques in a geographic information systems environment along with some advanced signal processing, and deep learning approaches. The book is of interest to all researchers, practitioners, and students in the fields of geological and mining engineering, geotechnical engineering, hydrogeomechanics, engineering geology, geotechnologies, groundwater and natural hazards, and analyses of some emerging earth processes and environmental variabilities.

Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.