Evaluation Of High Speed Civil Transport Handling Qualities Criteria With Supersonic Flight Data

Most flying qualities criteria have been developed from data in the subsonic flight regime. Unique characteristics of supersonic flight raise questions about whether these criteria successfully extend into the supersonic flight regime. Approximately 25 years ago NASA Dryden Flight Research Center addressed this issue with handling qualities evaluations of the XB-70 and YF-12. Good correlations between some of the classical handling qualities parameters, such as the control anticipation parameter as a function of damping, were discovered. More criteria have been developed since these studies. Some of these more recent criteria are being used in designing the High-Speed Civil Transport (HSCT). A second research study recently addressed this issue through flying qualities evaluations of the SR-71 at Mach 3. The research goal was to extend the high-speed flying qualities experience of large airplanes and to evaluate more recent MIL-STD-1797 criteria against pilot comments and ratings. Emphasis was placed on evaluating the criteria used for designing the HSCT. XB-70 and YF-12 data from the previous research supplemented the SR-71 data. The results indicate that the criteria used in the HSCT design are conservative and should provide good flying qualities for typical high-speed maneuvering. Additional results show correlation between the ratings and comments and criteria for gradual maneuvering with precision control. Correlation is shown between ratings and comments and an extension of the Neal/Smith criterion using normal acceleration instead of pitch rate. Cox, Timothy H. and Jackson, Dante W. Armstrong Flight Research Center RTOP 529-50-24...

The National Aeronautics and Space Administration (NASA) is currently developing advanced technologies to form the foundation for the next breakthrough in civil aviation: an economically viable, environmentally acceptable supersonic transport. NASA's High Speed Research Program works in conjunction with industry to identify and address critical technological challenges to initiating commercial development of a practical supersonic transport. The key technical areas investigated are engine emissions, fuel efficiency, service life, and weight; community noise; aircraft range and payload; and weight and service life of airframe structures. Areas of particular interest include the ability of technologies under development to meet program goals related to noise, emissions, service life, weight, range, and payload. This book examines aircraft design requirements, assesses the program's planning and progress, and recommends changes that will help the program achieve its overall objectives.

Two U.S. research pilots evaluated the Tupolev Tu-144 supersonic transport aircraft on three dedicated flights: one subsonic and two supersonic profiles. The flight profiles and maneuvers were developed jointly by Tupolev and U.S. engineers. The vehicle was found to have unique operational and flight characteristics that serve as lessons for designers of future supersonic transport aircraft. Vehicle subsystems and observed characteristics are described as are flight test planning and ground monitoring facilities. Maneuver descriptions and extended pilot narratives for each flight are included as appendices.