Fuselage Frame Boats

NOW WITH METRIC OFFSETS! Tired of struggling with that heavy plastic kayak? Are you looking for a lightweight boat but not willing to take out a second mortgage to buy it? What if I told you that you could build a boat weighting less than 35 lbs for $300 to $500? You can and in my new book I will show you how. This style was very popular in the 1950's and 1960's and many boat plans appeared in magazines such as Popular Mechanics and Popular Science. Even though it is no longer fashionable in the magazines, the fuselage style of construction is still probably the most cost effective way to build a small boat. Recently I have seen a renewed interest in this type of boat construction. People are rediscovering the advantages of Fuselage style Skin Boats. Fuselage frames boats cost very little to build. A sheet of marine plywood, a lightweight wood such as cedar for the stringers, a few yards of a synthetic fabric for the skin and something to waterproof the skin. Materials for a basic 17' kayak cost around $300. Adding a seat, deck rigging and adjustable footrest would add another $100 to $150 dollars depending on your preferences. For somewhere around $400 you can build a high performance, 30-35 lbs boat. A composite construction canoe or kayak of similar weight would cost thousands of dollars. This book will walk you through the process of building your own Skin on Frame canoe or kayak. I start by addressing the space needed to build a boat as well as tools needed. There is a detailed section on laying out the frames from a table of offsets. Progressing to how to assemble the frame, skinning the boat and through all the steps to preparing your boat for launching. Included are offsets for three of my boat designs. The StoneFly canoe, Curlew, a 15' Sea Kayak and new sea kayak design Pouco Barta.

The second edition of Fuselage Frame Boats is now available, titled More Fuselage Frame Boats. In it I will show you how to build light weight boats at a very low cost.While my new book covers some of the same material as the first book, it also has some new techniques and of course new boats. One new item is how to build a Fuselage Frame boat with a varnished wood transom.Included are offsets for four of my boat designs. Flyfisher, a small rowing boat. Matilda, a performance rowing boat with a wine glasses shaped varnished wood transom. The Mess-About 12' recreational kayak along with a kids kayak, Tadpole. Also there is Crawfish, a two person Pirogue. All offsets are listed in Metric and English.The Fuselage Frame style was very popular in the 1950's and 1960's and many boat plans appeared in magazines such as Popular Mechanics and Popular Science. Even though it is no longer fashionable in the magazines, the fuselage style of construction is still probably the most cost effective way to build a small boat. Recently I have seen a renewed interest in this type of boat construction. People are rediscovering the advantages of Fuselage style Skin Boats.Fuselage frame boats cost very little to build. A sheet of marine plywood, a lightweight wood such as cedar for the stringers, a few yards of a synthetic fabric for the skin and something to waterproof the skin. Materials cost are typically around $300. Nice wood for varnished seats and trim will add to your bill.This book will walk you through the process of building your own boat. I start by addressing the space needed to build a boat as well as tools needed. There is a detailed section on laying out the frames from a table of offsets. Progressing to how to assemble the frame, skinning the boat and through all the steps to preparing your boat for launching.

The first quick-and-easy composite construction method for canoes and kayaks This book is certain to appeal to any paddler with a DIY bent. Master craftsman Sam Rizzetta presents three attractive innovations: a new building method that makes Kevlar and carbon-fiber boats cheap and feasible for home builders; an ergonomically designed canoe that makes paddling easier and more comfortable; and a foam-flotation installation method that makes canoes and kayaks safe and unsinkable.

" ... [This book] leads you step-by-step through the process of creating your own lashed-frame, fabric-covered, custom-fitted Greenland kayak, using inexpensive, easy-to-find materials and common woodworking tools. ..."--Back cover.

Ultralight canoes and small boats are things of beauty, their apparent delicacy concealing great strength. They are lapstrake-constructed from marine plywood planks, each plank overlapping the one below it in a gracefully curved hull. Epoxy glue along the laps gives the hull structural reinforcement, minimizing the need for framing and permitting an amazingly light structure. Round-bilged and elegant, they are built over jigs, but the method is straightforward and not time consuming. You can build a boat that will give you fun and satisfaction, one you can be proud of, in a winter of leisurely weekends. No fancy tools are needed, and care and patience will make up whatever you lack in woodworking skills. All the information you need is here. Tom Hill, the chief proponent of ultralight boatbuilding and its leading practitioner, describes the method from start to finish using a skiff and canoe as examples. In the appendix is a gallery of ultralight designs, all but one of which you can build without lofting. If you want more flexibility, however, you can adapt almost any lapstrake small-boat design, traditional or modern, to the ultralight method. With some lofting (directions for which are given) you may then build a wide range of boats whose offsets are available. And you may adjust planking thickness and scantlings to give your boat extremely light weight with normal strength, or moderate weight with great strength. Particularly if you lack an extensively equipped workshop and professional skills, Ultralight Boatbuilding will unlock exciting possibilities you considered out of reach.

The first comprehensive book on stripbuilding almost any type of small boat Strip-planking is a popular method of amateur boat construction, but until now there has never been a book that showed how to use it for more than one type of boat. Author Nick Schade presents complete plans for three boats of different types (canoe, kayak, and a dinghy) and shows you step-by-step how to build them. Written for all amateur builders, the book covers materials, tools, and safety issues.

In Stitch-and-Glue Boatbuilding, one of the leading practitioners and teachers of the craft assembles the definitive how-to manual for the most popular method of amateur boatbuilding today. Enlivened with tales of boat shop mishaps and designs gone bad that entertain as they instruct, this invaluable book includes full plans and assembly instructions for nine boats--seven kayaks, a sailing skiff, and a wherry. Step-by-step photos and drawings make this an ideal guide for visual learners.