Gb 16735 2019 Translated English Of Chinese Standard Gb16735 2019

This Standard stipulates the content and structure of vehicle identification number, and the marking requirements and marking modification requirements of vehicle identification number. This Standard is applicable to automobile, and its incomplete vehicle, trailer, motorcycle and moped. Other vehicles that need vehicle identification number may also take this as a reference.

This Standard specifies product classification, technical requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, and ordering form (or contract) contents of platinum ingots. This Standard is applicable to the platinum ingots produced by the platinum-contained raw materials.

This Standard specifies the content and structure of a Vehicle Identification Number (VIN), so as to establish, on a world-wide basis, a uniform identification numbering system for road vehicles. This Standard also specifies the requirements for the location and marking of the Vehicle Identification Number on vehicles. This Standard applies to the motor vehicles, trailers, motorcycles and mopeds as defined in GB/T 3730.1-2001 and GB/T 5359.1-1996, and other vehicles necessary to have VIN label.

This Standard specifies the test method of activity for palladium carbon catalysts. This Standard applies to palladium carbon catalysts of hydrogenation reduction reactions for petrochemical industry, pharmaceutical intermediates, electronics industry, perfume industry, dye industry and other fine chemicals, which takes wood powdered activated carbon as the carrier and palladium as the main active component.

This Standard specifies measurement methods for cords and drawstrings on clothing for infants and children aged 14 and below. This Standard is applicable to clothing for infants and children aged 14 and below.

This Standard specifies grid patterns that can be used to quantitatively describe surface defects on a circular semiconductor wafer. This Standard applies to silicon wafers of which the nominal diameter is 100 mm ~ 200 mm; it also applies to other semiconductor material wafers.

This Standard specifies the requirements and inspection methods for parts and assemblies of the mechanical watch movements. This Standard applies to parts and assemblies of the mechanical watch movements that have undergone finishing processing.

This Standard stipulates the structural features, technical requirements and test methods of nickel alloy self-lubricated bearing material. This Standard is applicable to nickel alloy self-lubricated bearing material.