Gb T 15425 2014 Translated English Of Chinese Standard Gbt 15425 2014 Gb T15425 2014 Gbt15425 2014

This Standard specifies contents such as the structure, bar code character set, bar code symbol dimension, quality assurance of GS1 system code 128 (hereinafter referred to as GS1-128 code), and the application parameters, character string encoding and decoding rules of GS1-128 code. This Standard applies to automatic identification and data collection in the bar code system for commodity.

This Part of GB/T 18173 specifies the terms and definitions, classification and product markings, requirements, test methods, inspection rules, symbols, packaging, transportation and storage for the hydrophilic expansion rubber of polymer water-proof materials.

This standard specifies the test method for the thickness of pressure-sensitive adhesive tapes and other adhesive tapes. This standard applies to the determination of the thickness of adhesive tape. It is used for quality control of adhesive tape products.

This standard specifies the 180-degree peel test method for vulcanized rubber as bonded to metal. This standard is applicable to the determination of the 180 peel strength of vulcanized rubber as bonded to metal. The 180-degree peel strength of other flexible materials as bonded to rigid materials may also refer to this standard. This standard does not apply to low-flexibility materials which will produce cracks or delamination after bending 180. Such materials may be subjected to a 90 peel test, the test method may refer to GB/T 7760.

This Standard specifies the basic design requirements, technical requirements, manufacture and installation, and test methods for the strops with no more than 4 passengers. This Standard is applicable to the design, manufacture, installation and testing of the strops.

This Standard specifies the requirements for the restricted substances management systems of the organizations related to the production of electrical and electronic products, so as to help the organizations identify the process related to the use of restricted substances according to the relevant laws and regulations or customer requirements, and to establish and implement the restricted substances management systems.

This Standard specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (see the Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.

This Part of GB/T 20042 specifies terms and definitions, thickness uniformity test, electrical resistance test, mechanical strength test, air permeability test, porosity test, bulk density test, areal density test, roughness test and test report for test method of carbon paper properties of proton exchange membrane fuel cells.