Gb T 32616 2016 Translated English Of Chinese Standard Gbt 32616 2016 Gb T32616 2016 Gbt32616 2016

This Standard specifies the instrumental assessment of change in colour for determination of grey scale rating of test sample relative to untested sample, as well as the calculation method that converts the instrument measured value to the number of grey sample card level used for colour change.

This Standard specifies the category, code, order content, dimension, shape, mass, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of seamless steel tubes for low-temperature-service piping.

This Standard specifies the limit value and detection of the burr height for stampings. This Standard applies to metal stampings that have certain requirements for burr height.

This Standard specifies the type and dimension, technical conditions and markings of unchamfered hexagon thin nuts.

This Standard specifies test methods for verifying the capabilities of tyres for truck and bus, including terms and definitions, test equipment and precision, test conditions, test procedure, judgment criterion and test report, etc. In the test methods given, only some may be required depending on the type of tyre to be tested.

This Standard specifies type sizes, technical conditions and marks of hexagon nuts, style 2.

This Standard specifies the form and dimensions of ends of parts with external metric screw thread (e.g. bolt, screw and stud ends) recommended for use. This Standard applies to standardized or non-standardized threaded parts.

This Standard specifies type sizes, technical conditions and marks of hexagon nuts, style 2 - fine pitch thread.