Gb T 33324 2016 Translated English Of Chinese Standard Gbt 33324 2016 Gb T33324 2016 Gbt33324 2016

This Standard specifies the method to determine the content of 10 elements in total -- such as 9 heavy metal elements, lead (Pb), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), zinc (Zn), iron (Fe), arsenic (As) and mercury (Hg), AND metal element of aluminum (Al), through the inductively coupled plasma atomic emission spectrometer. This Standard is applicable to the determination of the heavy metal content in latex products.

This Standard specifies the category, code, order content, dimension, shape, mass, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of seamless steel tubes for low-temperature-service piping.

This Standard specifies the terms and definitions, codes, models and examples, ordering contents, technical requirements, test methods, inspection rules, package, marking, quality certificate, handling, stacking and storage of zinc-aluminum alloy coated section steel. This Standard is applicable to the zinc-aluminum alloy coated section steel of hot-rolled section steel (hereinafter referred to as section steel) by the continuous hot dip plating mode.

This Part of GB/T 16824 specifies the type and dimension, technical conditions and markings of hexagon washer head tapping screws.

This Standard specifies the limit value and detection of the burr height for stampings. This Standard applies to metal stampings that have certain requirements for burr height.

This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order (or contract) content of aluminum alloy ingots for casting. This Standard is applicable to aluminum alloy ingots for aluminum alloy castings.

This Standard specifies test methods for verifying the capabilities of tyres for truck and bus, including terms and definitions, test equipment and precision, test conditions, test procedure, judgment criterion and test report, etc. In the test methods given, only some may be required depending on the type of tyre to be tested.

This Standard specifies the type and dimension, technical conditions and markings of unchamfered hexagon thin nuts.