Gb T 35076 2018 Translated English Of Chinese Standard Gbt 35076 2018 Gb T35076 2018 Gbt35076 2018

This Standard specifies basic safety and occupational health requirements for production equipment. This Standard is applicable to all in-service production equipment. This Standard is not applicable to production equipment with regulations.

This Standard specifies the requirements, test methods, inspection rules, packaging, marking, transportation, storage and quality certificate of scandium metal. This Standard is applicable to scandium metal that is manufactured with the method of metallothermic reduction or the method of intermediate alloy, and then, the method of vacuum distillation. The scandium metal shall be applied to aviation, aerospace (space navigation, rocket and missile), electronic technology (electronics, nuclear, laser, electric light source) and metallurgy, etc.

This Standard specifies the types and basic parameters of straight-sided highspeed mechanical power presses of which the nominal force range is 250kN~6300kN. This Standard is applicable to straight-sided high-speed mechanical power presses of general use.

This Standard specifies the symbols for cylindrical worm and wormwheel. This Standard is applicable to the cylindrical worm gearing with a shaft angle, and its worm and wormwheel.

This Standard specifies the basic requirements for test pieces, test equipment, installation and debugging, torque efficiency test, transmission precision test, service life test, bending moment rigidity test and data processing of bench test of precision gear transmission for robot. This Standard is applicable to bench test of precision gear transmissions (such as: harmonic gear reducers, planetary cycloid reducers and cycloid pin gear reducers) for robots in general industrial environment.

This Standard specifies the module and diameter of cylindrical worm. This Standard applies to worms of cylindrical worm gears.

This Part of GB/T 879 specifies type sizes, applications, technical specifications and markings for straight slotted, heavy-duty spring-type straight pins. This Part is applicable to spring-type straight pins of which the nominal diameter is d1 = 1mm~50mm, the material is steel, austenitic and martensitic stainless steel, with straight groove and withstanding heavy load.

This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage of disc brake pad assembly for automobile. This Standard applies to disc brake pad assembly for hydraulic and pneumatic disc brakes for type M, type N, and type O vehicles.