Gb T 37224 2018 Translated English Of Chinese Standard Gbt 37224 2018 Gb T37224 2018 Gbt37224 2018

This Standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of drum brake linings for automobiles. This Standard applies to drum brake linings for vehicles of categories M, N and O.

This Standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage of disc brake pad assembly for automobile. This Standard applies to disc brake pad assembly for hydraulic and pneumatic disc brakes for type M, type N, and type O vehicles.

This Standard specifies the terms, definitions, technical requirements, test methods, inspection rules, marking, accessory documents, transportation, storage and exitfactory requirement of center-axle trailer. This Standard is applicable to center-axle trailers that are operated on roads. Other center-axle trailers can take this as a reference in implementation.

This Part of GB/T 15224 specifies the classification of coal based on dry basis ash (Ad) range, naming and inspection of ash. This Part is applicable to coal resource exploration and evaluation, as well as guidance on coal production and processing.

This Standard specifies using the thermogravimetric analysis method to determine the moisture content in the solid chemical products. This Standard is applicable to determine the moisture content in the solid chemical products with moisture content range from 0.050% to 28.00%. This Standard is not applicable to the determination of chemical products that shall be weathered, deliquesced, volatized at the room temperature; or the determination of chemical products with decomposition temperature less than 105-C. For some samples, the moisture content may contain a quantity of volatiles at 105-C below.

This Standard specifies personnel requirements, facilities and equipment, testing procedures, testing steps and sample management procedures for label conformance testing. This Standard is applicable to label conformance testing of various products.

This Standard specifies the classification, types and marks, technical requirements, inspection methods, inspection rules, packaging, transport and storage for phantom of maximum detectable steel thickness for industrial computed tomography (CT) testing. This Standard is applicable to type inspection and exit-factory inspection for phantom of maximum detectable steel thickness for industrial CT testing of which radian energy is 225keV and above. This Standard can also be used as the basis for acceptance of user orders.

This Standard specifies basic safety and occupational health requirements for production equipment. This Standard is applicable to all in-service production equipment. This Standard is not applicable to production equipment with regulations.