Gb T 6324 6 2014 Translated English Of Chinese Standard Gbt 6324 6 2014 Gb T6324 6 2014 Gbt6324 6 2014

This Part of GB/T 6324 specifies the instrument method that adopts the principle that was determined by International Commission on Illumination (CIE) in 1931, using X, Y, Z (tristimulus values) to express the color of clear liquid to determine the color (expressed in platinum-cobalt color). This Part is applicable to determine clarified, non-turbid liquid organic chemical products of which the nominal platinum-cobalt color number is 0~100 and the sample has similar absorption characteristics to the platinum-cobalt solution, without fluorescence emission.

This Part of GB/T 3903 specifies a test method for determining volatile organic chemical liquid products evaporated on a water bath after the dry residue.

This Part specifies the visual colorimetric method and titration method used for the determination of potassium permanganate in organic chemical products.

This Standard specifies contents such as the structure, bar code character set, bar code symbol dimension, quality assurance of GS1 system code 128 (hereinafter referred to as GS1-128 code), and the application parameters, character string encoding and decoding rules of GS1-128 code. This Standard applies to automatic identification and data collection in the bar code system for commodity.

This Standard specifies the terms and definitions for general use, category of tyres, components of tyres, tread pattern, rims, dimension of tyres, performance and test of tyre, tyre marking, appearance defects, application, retread and repair.

This standard specifies the 180-degree peel test method for vulcanized rubber as bonded to metal. This standard is applicable to the determination of the 180 peel strength of vulcanized rubber as bonded to metal. The 180-degree peel strength of other flexible materials as bonded to rigid materials may also refer to this standard. This standard does not apply to low-flexibility materials which will produce cracks or delamination after bending 180. Such materials may be subjected to a 90 peel test, the test method may refer to GB/T 7760.

This Standard specifies the basic design requirements, technical requirements, manufacture and installation, and test methods for the strops with no more than 4 passengers. This Standard is applicable to the design, manufacture, installation and testing of the strops.

This Standard specifies the terms and definitions, classification, codes and designation, order contents, dimension, sape, weight ang allowable deviation, technical requirements, test methods, inspection rules, packaging. marking and quality certificate of steel wire for prestressing of concrete.