Gb T 6995 5 2008 Translated English Of Chinese Standard Gbt 6995 5 2008 Gb T6995 5 2008 Gbt6995 5 2008

This Part of GB/T 6995 is applicable to identification of insulated cores of power cables, including the oil-filled cables, oil impregnated paper insulated cables, and extruded solid insulated cables.

This Part of GB/T 6995 is applicable to the identification markings for electrical appliance and equipment wires/cables, electric cables and telecommunication cables, etc., as well as the insulated cores.

This Part of GB/T 6995 is applicable to the identification markings for the insulated conductor of wires and cables for rubber-insulated and plastic insulated electrical appliances and equipments.

This Part of GB/T 6995 is applicable to the colours of all kinds of wire and cable identification marks AND other insulated core identification marks.

This Part of GB/T 6995 is applicable to identification of electrical equipment wires and cables, power cables and communication cables.

This part specifies the infrared absorption method, gasometric method, gravimetric method, coulometric method to determine the carbon content of ferromanganese-silicon, ferromanganese, blast furnace ferromanganese, nitrogen-bearing ferromanganese, manganese metal, electrolytic manganese metal.

This Standard stipulates the basic requirements for the type and size, profile size and deviation, technical requirements, marking and packaging of thread rolling flat dies for general purpose metric screw threads. This Standard applies to thread rolling flat dies for processing general purpose metric screw threads (GB/T 192~193, GB/T 196~197). Thread rolling flat dies are divided into three precision grades: grade 1, grade 2 and grade 3. Grade 1 applies to the processing of external threads with tolerance grades 4 and 5; grade 2 applies to the processing of external threads with tolerance grades 5 and 6; grade 3 applies to the processing of external threads with tolerance grades 6 and 7.

This part of GB/T 3478 specifies the test method for the straight cylindrical involute splines. This part is applicable to the inspection of splines manufactured according to GB/T 3478.1. It may also be used as a reference when using the gauge to inspect the straight cylindrical involute splines.