Geochemical Modeling For Mine Site Characterization And Remediation

The single most important factor for the successful application of a geochemical model is the knowledge and experience of the individual(s) conducting the modeling. Geochemical Modeling for Mine Site Characterization and Remediation is the fourth of six volumes in the Management Technologies for Metal Mining Influenced Water series about technologies for management of metal mine and metallurgical process drainage. This handbook describes the important components of hydrogeochemical modeling for mine environments, primarily those mines where sulfide minerals are present—metal mines and coal mines. It provides general guidelines on the strengths and limitations of geochemical modeling and an overview of its application to the hydrogeochemistry of both unmined mineralized sites and those contaminated from mineral extraction and mineral processing. The handbook includes an overview of the models behind the codes, explains vital geochemical computations, describes several modeling processes, provides a compilation of codes, and gives examples of their application, including both successes and failures. Hydrologic modeling is also included because mining contaminants most often migrate by surface water and groundwater transport, and contaminant concentrations are a function of water residence time as well as pathways. This is an indispensable resource for mine planners and engineers, environmental managers, land managers, consultants, researchers, government regulators, nongovernmental organizations, students, stakeholders, and anyone with an interest in mining influenced water. The other handbooks in the series are Basics of Metal Mining Influenced Water; Mitigation of Metal Mining Influenced Water; Mine Pit Lakes: Characteristics, Predictive Modeling, and Sustainability; Techniques for Predicting Metal Mining Influenced Water; and Sampling and Monitoring for the Mine Life Cycle.

Techniques for Predicting Metal Mining Influenced Water is a must-read for planners, regulators, consultants, land managers, researchers, students, stakeholders, and others concerned about mining influenced water. Identifying potential mine wastes and their characteristics, and predicting their drainage quality are critical aspects of mine site design, operations, and closure planning. Failure to effectively conduct these evaluations for a mine site can result in environmental compliance issues that may create long-term financial liabilities. Basics of Metal Mining Influenced Water serves as an introduction to a series of six handbooks on technologies for management of metal mine and metallurgical process drainage. The other five handbooks are Mitigation of Metal Mining Influenced Water; Mine Pit Lakes: Characteristics, Predictive Modeling, and Sustainability; Geochemical Modeling for Mine Site Characterization and Remediation; Techniques for Predicting Metal Mining Influenced Water; and Sampling and Monitoring for the Mine Life Cycle.

This Handbook has been developed by the EPA as a resource for project managers working on addressing the environmental concerns posed by inactive mines and mineral processing sites. This is not policy or guidance, but a compendium of info. gained during many years of experience on mine site cleanup projects. Chapters: Overview of Mining and Mineral Processing Operations; Environmental Impacts from Mining; Setting Goals and Measuring Success; Community Involve. at Mining Waste Sites; Scoping Studies of Mining and Mineral Processing Impact Areas; Sampling and Analysis of Impacted Areas; Scoping and Conducting Ecological and Human Health Risk Assessments at Superfund Mind Waste Sites; Site Mgmt. Strategies; and Remediation and Cleanup Options.

Basics of Metal Mining Influenced Water is a must-read for planners, regulators, consultants, land managers, students, researchers, or others concerned about the environmentally sound management of metal mine wastes and drainage quality. The first of a series of six handbooks on technologies for managing metal mine and metallurgical process draining, this book offers a unique, comprehensive perspective on the subject. Unlike other texts that focus primarily on acid drainage from coal mines, the authors examine both acidic and neutral pH waters that can be hazardous to the environment. Planning a new mine in today s increasingly contentious regulatory and political environment demands a different philosophy. Basics of Metal Mining Influenced Water takes an innovative, holistic approach by considering all aspects of the mine life cycle, including closure. Written by a team of experts from state and federal governments, academia, and the mining industry, Basics of Metal Mining Influenced Water also discusses the major physical and chemical relationships between mining, climate, environment, and mine waste drainage quality. The authors have included an extensive glossary defining hundreds of technical terms for easier reading and understanding.

Sampling and Monitoring for the Mine Life Cycle provides an overview of sampling for environmental purposes and monitoring of environmentally relevant variables at mining sites. It focuses on environmental sampling and monitoring of surface water, and also considers groundwater, process water streams, rock, soil, and other media including air and biological organisms. The handbook includes an appendix of technical summaries written by subject-matter experts that describe field measurements, collection methods, and analytical techniques and procedures relevant to environmental sampling and monitoring. The sixth of a series of handbooks on technologies for management of metal mine and metallurgical process drainage, this handbook supplements and enhances current literature and provides an awareness of the critical components and complexities involved in environmental sampling and monitoring at the mine site. It differs from most information sources by providing an approach to address all types of mining influenced water and other sampling media throughout the mine life cycle. Sampling and Monitoring for the Mine Life Cycle is organized into a main text and six appendices that are an integral part of the handbook. Sidebars and illustrations are included to provide additional detail about important concepts, to present examples and brief case studies, and to suggest resources for further information. Extensive references are included.

This book accompanies you on a journey that starts with the basics of mine water treatment and takes you further through correct sampling for planning to active and passive systems. In the respective chapters you will learn the most important techniques about the parameters to be measured (e.g. on-site parameters, flow rate), which methods are available to actively treat your mine water (e.g. high density sludge method, reverse osmosis, ion exchange) and which ones to perform passive treatment (e.g. constructed wetlands, vertical flow reactor, limestone channel). You will also get an insight into the use of mine water. Don’t expect a cookbook – rather, it’s an ingredients and utensils list to help you find the right recipe. For extended help on this, check out the more than 1000 references on all the techniques presented. I wrote this book for hydrogeologists, engineers, graduate students, government officials, miners, geoecologists, chemical engineers – in the broadest sense: you. This book is a translation of an original German edition. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision and a thorough copy editing and update by the author ensured that the contents are correctly represented.

Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.

Mitigation of Metal Mining Influenced Water is the "how to fix it" volume in a series of six handbooks on technologies for managing metal mine and metallurgical process influenced water. Unlike other texts that focus exclusively on acid drainage from coal mines, this comprehensive series examines both acidic and neutral pH waters from metal mining and metallurgical processes that may impact the environment. The authors take a holistic approach by considering all aspects of the mine life cycle, from planning and design to closure. In this book you'll learn how mining influenced water concerns can be prevented or reduced by disrupting the geochemical relationship that contributes to the release of metals and/or acidity. Industry experts provide insights into understanding a mine's physical environment and how it can influence waste and drainage quality. They outline key issues designers must address, including involving stakeholders who may be affected long after the mine closes. Case histories offer valuable planning and design considerations by illustrating what works and what doesn't. You'll also benefit from a thorough examination of mitigating technologies in a host of mining and processing situations, as well as the latest arsenal of waste treatment options. Mitigation of Metal Mining Influenced Wateris a must-read for planners, regulators, consultants, land mangers, students, researchers, and others concerned about the environmentally sound management of metal mine and metallurgical processing wastes and drainage quality.