Geotechnical Engineering Calculations And Rules Of Thumb

Geotechnical Engineering Calculations Manual offers geotechnical, civil and structural engineers a concise, easy-to-understand approach the formulas and calculation methods used in of soil and geotechnical engineering. A one stop guide to the foundation design, pile foundation design, earth retaining structures, soil stabilization techniques and computer software, this book places calculations for almost all aspects of geotechnical engineering at your finger tips. In this book, theories is explained in a nutshell and then the calculation is presented and solved in an illustrated, step-by-step fashion. All calculations are provided in both fps and SI units. The manual includes topics such as shallow foundations, deep foundations, earth retaining structures, rock mechanics and tunnelling. In this book, the author's done all the heavy number-crunching for you, so you get instant, ready-to-apply data on activities such as: hard ground tunnelling, soft ground tunnelling, reinforced earth retaining walls, geotechnical aspects of wetland mitigation and geotechnical aspects of landfill design. • Easy-to-understand approach the formulas and calculations • Covers calculations for foundation,earthworks and/or pavement subgrades • Provides common codes for working with computer software • All calculations are provided in both US and SI units

Geotechnical Engineering Calculations and Rules of Thumb, Second Edition, offers geotechnical, civil and structural engineers a concise, easy-to-understand approach to selecting the right formula and solving even most difficult calculations in geotechnical engineering. A "quick look up guide", this book places formulas and calculations at the reader’s finger tips. In this book, theories are explained in a "nutshell" and then the calculation is presented and solved in an illustrated, step-by-step fashion. In its first part, the book covers the fundamentals of Geotechnical Engineering: Soil investigation, condition and theoretical concepts. In the second part it addresses Shallow Foundations, including bearing capacity, elastic settlement, foundation reinforcement, grillage design, footings, geogrids, tie and grade beams, and drainage. This session ends with a chapter on selecting foundation types. The next part covers Earth Retaining Structures and contains chapters on its basic concepts and types, gabion walls and reinforced earth walls. The following part covers Geotechnical Engineering Strategies providing coverage of softwares, instrumentation, excavations, raft design, rock mechanics, dip angle and strike, rock stabilization equipment, soil anchors, tunnel design, seismology, geosynthetics, and slurry cutoff walls. The final part is on Pile Foundations including content on design on sandy soils, clay soils, pin piles, negative skin friction, caissons and pile clusters. In this new and updated edition the author has incorporated new software calculation tools, current techniques for foundation design, liquefaction information, seismic studies, laboratory soil tests, geophysical techniques, new concepts for foundation design and Dam designs. All calculations have been updated to most current material characteristics available in the market. Practicing Geotechnical, Civil and Structural Engineers may find in this book an excellent companion to their day-to day work, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering students may find particular interest in the concise theory presented in the beginning of each chapter. Calculations both in FPS and SI metric systems; Convenient access to all needed calculations; Access to concise theory that helps understand the calculations; Case studies from around the world; Includes new software calculation tools.

Geotechnical Engineering Calculations Manual offers geotechnical, civil and structural engineers a concise, easy-to-understand approach the formulas and calculation methods used in of soil and geotechnical engineering. A one stop guide to the foundation design, pile foundation design, earth retaining structures, soil stabilization techniques and computer software, this book places calculations for almost all aspects of geotechnical engineering at your finger tips. In this book, theories is explained in a nutshell and then the calculation is presented and solved in an illustrated, step-by-step fashion. All calculations are provided in both fps and SI units. The manual includes topics such as shallow foundations, deep foundations, earth retaining structures, rock mechanics and tunnelling. In this book, the author's done all the heavy number-crunching for you, so you get instant, ready-to-apply data on activities such as: hard ground tunnelling, soft ground tunnelling, reinforced earth retaining walls, geotechnical aspects of wetland mitigation and geotechnical aspects of landfill design. • Easy-to-understand approach the formulas and calculations • Covers calculations for foundation,earthworks and/or pavement subgrades • Provides common codes for working with computer software • All calculations are provided in both US and SI units

Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author’s experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. Convenient for day-to-day consults; Numerous design examples for sandy soils, clay soils, and seismic loadings; Now including helical, composite, wind turbine monopiles, and spiral coil energy piles; Methodologies and case studies for different pile types; Serves as PE exam preparation material.

Construction Engineering Calculations and Rules of Thumb begins with a brief, but rigorous, introduction to the mathematics behind the equations that is followed by self-contained chapters concerning applications for all aspects of construction engineering. Design examples with step-by-step solutions, along with a generous amount of tables, schematics, and calculations are provided to facilitate more accurate solutions through all phases of a project, from planning, through construction and completion. Includes easy-to-read and understand tables, schematics, and calculations Presents examples with step-by-step calculations in both US and SI metric units Provides users with an illustrated, easy-to-understand approach to equations and calculation methods

An immense treasure trove containing hundreds of equipment symptoms, arranged so as to allow swift identification and elimination of the causes. These rules of thumb are the result of preserving and structuring the immense knowledge of experienced engineers collected and compiled by the author - an experienced engineer himself - into an invaluable book that helps younger engineers find their way from symptoms to causes. This sourcebook is unrivalled in its depth and breadth of coverage, listing five important aspects for each piece of equipment: * area of application * sizing guidelines * capital cost including difficult-to-find installation factors * principles of good practice, and * good approaches to troubleshooting. Extensive cross-referencing takes into account that some items of equipment are used for many different purposes, and covers not only the most familiar types, but special care has been taken to also include less common ones. Consistent terminology and SI units are used throughout the book, while a detailed index quickly and reliably directs readers, thus aiding engineers in their everyday work at chemical plants: from keywords to solutions in a matter of minutes.

Finally, there is a one-stop reference book for the petroleum engineer which offers practical, easy-to-understand responses to complicated technical questions. This is a must-have for any engineer or non-engineer working in the petroleum industry, anyone studying petroleum engineering, or any reference library. Written by one of the most well-known and prolific petroleum engineering writers who has ever lived, this modern classic is sure to become a staple of any engineer’s library and a handy reference in the field. Whether open on your desk, on the hood of your truck at the well, or on an offshore platform, this is the only book available that covers the petroleum engineer’s rules of thumb that have been compiled over decades. Some of these “rules,” until now, have been “unspoken but everyone knows,” while others are meant to help guide the engineer through some of the more recent breakthroughs in the industry’s technology, such as hydraulic fracturing and enhanced oil recovery. The book covers every aspect of crude oil, natural gas, refining, recovery, and any other area of petroleum engineering that is useful for the engineer to know or to be able to refer to, offering practical solutions to everyday engineering problems and a comprehensive reference work that will stand the test of time and provide aid to its readers. If there is only one reference work you buy in petroleum engineering, this is it.

This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.