Great Western 0 6 0 Tender Goods Locomotive Classes

This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.

This is a book that looks at the 0-6-0 tender goods locomotives of the Southern Railway, from the steam locomotive classes taken over at the railway grouping in 1923, through to the two classes introduced during Southern Railway days, that of the Q and Q1 classes.The Southern Railway had a rich and varied number of 0-6-0 tender goods classes, originating from all three former main line pre grouping companies, many of them lasted until the late 1950s and early 1960s.Many of the older Victorian and Edwardian classes of locomotive taken over in 1923, did not last very long with the new company, but are covered here for historical and modelling interest.

British Railways’ David Maidment presents a pictorial history of the county class trains designed by George Jackson Churchward and F. W. Hawksworth. The Great Western Railway had two classes of tender locomotives named after counties. The first class of two cylinder 4-4-0 tender locomotives, designed by George Jackson Churchward, were introduced in the 1900s to provide efficient motive power, including lines on the North & West route between Hereford and Shrewsbury, owned jointly by the Great Western and the London and North Western Railway. The 4-4-0 counties were in service until the early 1930s, when they were withdrawn and replaced by more modern motive power. The 4-4-0 counties were paralleled in design by the county 4-4-2 tanks, which operated suburban services in the London area and were also withdrawn in the early 1930s. In 1945, the Great Western introduced the County Class 4-6-0 tender locomotives, designed by F. W. Hawksworth. These two cylinder machines had a high pressure boiler that was meant to give the same tractive effort as a Castle Class 4-6-0, four cylinder locomotive. After modifications and boiler pressure reduction, the County Class 4-6-0s operated in express and semi fast train service, until the last members of the class were withdrawn in 1964. Great Western, County Classes: The Churchward 4-4-0s, 4-4-2 Tanks and Hawksworth 4-6-0s details the fascinating history of the trains that were a crucial part of England’s twentieth century transportation system.

After tackling the GW pannier tanks in his ‘Locomotive Portfolios’ for Pen & Sword, author David Maidment seeks out descriptions and photographs of the GW 0-6-2 tank engines, the majority of which were built by the Rhymney, Taff Vale, Barry and other Welsh railways from the last decade or so of the nineteenth century onwards. The engines of eight different companies, absorbed by the GWR in 1922, are described and illustrated, and the way in which many were modernised and rebuilt at Swindon or Caerphilly Works in the 1920s. Charles Collett was, however, faced with a motive power crisis in the mining valleys at the Grouping, as many of the companies had economised on essential maintenance as the GW’s take-over drew near, and he had to hurriedly design a standard 0-6-2T to complement and bolster their work as the powerful GW 2-8-0Ts were too heavy and wide for many of the Cardiff valleys. These engines, the 56XX & 66XX classes, became part of the South Wales scene between 1925 and 1964, mainly running the coal traffic between pits and docks, although they dominated Cardiff Valley passenger services until the influx of BR 3MT 2-6-2Ts and GW 41XX 2-6-2Ts in 1954/5. The book has nearly 40,000 words of text and around 300 black & white photographs.

A detailed look at the nineteenth-century steam locomotive engineer and the ups and downs of his career, with numerous photos throughout. Born in Scotland in 1840, Dugald Drummond had a long career in locomotive and railway engineering, including prominent positions on the Highland; London Brighton & South Coast Railway, North British, and Caledonian Railways, before arriving on the London & South Western Railway in the mid-1890s. There he replaced his mild-mannered and better-liked predecessor, William Adams. His locomotives were a mix: His 4-4-0 tender and 0-4-4 tank classes were very good, but his 4-6-0 tender locomotives proved a disappointment, with the exception of the T14 class, which lasted in service until 1951. Many of his 4-4-0 tender and 0-4-4 tank locomotives, the T9 and M7 classes, lasted until the early 1960s on British Railways. As a result of his stubborn nature, Drummond died in 1912 after an accident that scalded his feet, having refused to get proper treatment. But much of his work lived on for decades, and examples are preserved today in the National Collection and on the Swanage Railway.

The Great Western Railway experienced the trauma and disruption of the end of the broad gauge in 1892 and were faced with equipping the network with suitable motive power, especially in Devon and Cornwall where the last track conversion had taken place. West of Newton Abbot, the GWR had relied on a variety of 4-4-0, 2-4-0, 0-4-2 and 0-4-4 side and saddle tanks, often doubled-headed, and Dean set about designing a sturdy outside-framed powerful 4-4-0 with 5ft 8in coupled wheels, the 'Dukes', to tackle increasing loads over the heavily graded main line. Then, Churchward came to assist the ailing Locomotive Superintendent, using his knowledge and experience of American and continental practice to develop the Dean designs. He improved the efficiency and performance of the boilers, using the Belgian Belpaire firebox, then developed the tapered 'cone' boiler, and applied it to the chassis of the 'Duke's to form the 'Camel' class, later known as the 'Bulldogs', which eventually numbered 156 locomotives. Finally, in the 1930s when engines of the 'Duke' route availability were still required but their frames were life-expired, their boilers were matched with the stronger frames of the 'Bulldogs' to form the 'Dukedog' class, which lasted until the 1950s, particularly on the former Cambrian lines in mid-Wales. This book recounts the design, construction and operation of these small-wheeled outside-framed locomotives with many rare photos of their operation in the first decade of the twentieth century as well as in more recent times.

The name 'Great Western Railway' immediately conjures up images of Stars, Castles and Kings, the legendary express passenger locomotives that were the envy of the world in their day. However, the Swindon empire also produced extensive fleets of all-purpose tank engines - everyday reliable workhorses and unsung heroes - which were standout classics in their own right. The most distinctive and immediately recognizable type in terms of shape, all but unique to the GWR, was the six-coupled pannier tank. With hundreds of photographs throughout, Great Western Railway Pannier Tanks covers the supremely innovative pannier tank designs of GWR chief mechanical engineer Charles Benjamin Collett, the appearance of the 5700 class in 1929, and the 5400, 6400, 7400 and 9400 classes. Also, the demise of the panniers in British Railways service and the 5700s that marked the end of Western Region steam, followed by a second life beneath the streets - 5700 class panniers on London Underground. Also covers Panniers in preservation, plus cinema and TV roles and even a Royal Train duty. Superbly illustrated with 260 colour and black & white photographs.

This third volume in the series on the Great Western Castle class locomotives focuses on the eight that have been preserved and goes into depth on the reconstruction of three of them, the two Tyseley ones, 5043 and 7029 described by Bob Meanley and Didcot’s 4079 recounted by David Maidment from the records of the Great Western Society, including the full story of 4079’s prolonged stay in Western Australia, its return to the UK and subsequent restoration. The history of all eight is covered and copiously illustrated, including over 100 color photographs, with many during the restoration work by Bob Meanley and in operation by David Maidment. The book includes records of their operation and performance since restoration when some of the most remarkable performances of these locomotives were achieved.