Haptic Teleoperation Systems

This book examines the signal processing perspective in haptic teleoperation systems. This text covers the topics of prediction, estimation, architecture, data compression and error correction that can be applied to haptic teleoperation systems. The authors begin with an overview of haptic teleoperation systems, then look at a Bayesian approach to haptic teleoperation systems. They move onto a discussion of haptic data compression, haptic data digitization and forward error correction.

An important obstacle in Minimally Invasive Surgery (MIS) is the significant degradation of haptic feedback (sensation of touch) to the surgeon about surgical instrument's interaction with tissue. This monograph is concerned with devices and methods required for incorporating haptic feedback in master-slave robotic MIS systems. In terms of devices, novel mechanisms are designed including a surgical end-effector (slave) with full force sensing capabilities and a surgeon-robot interface (master) with full force feedback capabilities. Using the master-slave system, various haptic teleoperation control schemes are compared in terms of stability and performance, and passivity-based time delay compensation for haptic teleoperation over a long distance is investigated. The monograph also compares haptic feedback with visual feedback and with substitution for haptic feedback by other sensory cues in terms of surgical task performance. Sample Chapter(s). Introduction (1,826 KB). Contents: Introduction; Sensorized Surgical Effector (Slave); Haptic User Interface (Master); Unilateral Teleoperation Control; Bilateral Teleoperation Control; Substitution for Haptic Feedback: Bilateral Teleoperation Control Under Time Delay. Readership: Researchers in robotics, teleoperation, haptics, virtual reality, sensor technology, human machine interaction, and minimally invasive surgery and therapy.

This book covers all topics relevant for the design of haptic interfaces and teleoperation systems. The book provides the basic knowledge required for understanding more complex approaches and more importantly it introduces all issues that must be considered for designing efficient and safe haptic interfaces. Topics covered in this book provide insight into all relevant components of a haptic system. The reader is guided from understanding the virtual reality concept to the final goal of being able to design haptic interfaces for specific tasks such as nanomanipulation. The introduction chapter positions the haptic interfaces within the virtual reality context. In order to design haptic interfaces that will comply with human capabilities at least basic understanding of human sensors-motor system is required. An overview of this topic is provided in the chapter related to human haptics. The book does not try to introduce the state-of-the-art haptic interface solutions because these tend to change quickly. Only a careful selection of different kinematic configurations is shown to introduce the reader into this field. Mathematical models of virtual environment, collision detection and force rendering topics are strongly interrelated and are described in the next two chapters. The interaction with the virtual environment is simulated with a haptic interface. Impedance and admittance based approaches to haptic robot control are presented. Stability issues of haptic interaction are analyzed in details and solutions are proposed for guaranteeing stable and safe operation. Finally, haptic interaction is extended to teleoperation systems. Virtual fixtures which improve the teleoperation and human-robot cooperation in complex environments are covered next and the last chapter presents nanomanipulation as one specific example of teleoperation.

This work addresses the challenge of providing effective cutaneous haptic feedback in robotic teleoperation, with the objective of achieving the highest degree of transparency whilst guaranteeing the stability of the considered systems. On the one hand, it evaluates teleoperation systems that provide only cutaneous cues to the operator, thus guaranteeing the highest degree of safety. This cutaneous-only approach shows intermediate performance between no force feedback and full haptic feedback provided by a grounded haptic interface, and it is best suitable for those scenarios where the safety of the system is paramount, e.g., robotic surgery. On the other hand, in order to achieve a higher level of performance, this work also investigates novel robotic teleoperation systems with force reflection able to provide mixed cutaneous and kinesthetic cues to the operator. Cutaneous cues can compensate for the temporary reduction of kinesthetic feedback necessary to satisfy certain stability conditions. This state-of-the-art volume is oriented toward researchers, educators, and students who are interested in force feedback techniques for robotic teleoperation, cutaneous device design, cutaneous rendering methods and perception studies, as well as readers from different disciplines who are interested in applying cutaneous haptic technologies and methods to their field of interest.

The authors of this book provide the first review of haptic optical tweezers, a new technique which brings together force feedback teleoperation and optical tweezers. This technique allows users to explore the microworld by sensing and exerting piconewton-scale forces with trapped microspheres. The design of optical tweezers for high-quality haptic feedback is challenging, given the requirements for very high sensitivity and dynamic stability. The concept, design process and specification of optical tweezers reviewed throughout this book focus on those intended for haptic teleoperation. The authors provide two new specific designs as well as the current state of the art. Furthermore, the remaining important issues are identified for further developments. Haptic optical tweezers will soon become an invaluable tool for force feedback micromanipulation of biological samples and nano- and micro-assembly parts.

This research report brings together present trends in advanced welding robots, robotic welding, artificial intelligent and automatic welding. It includes important technical subjects on welding robots such as intelligent technologies and systems, and design and analysis. Modeling, identification and control of the welding process are presented, as well as knowledge-based systems for welding and tele-robotic welding. Other topics covered are sensing and data fusion, computer vision and virtual-reality applications of the welding process. An overview of intelligent and flexible manufacturing systems is given in addition to artificial intelligent technologies for industrial processes.

Teleoperation systems are designed to allow their user(s) to perform manipulation tasks in a remote environment. Human work performance with modern teleoperation systems is prone to handling errors, damage to equipment and slow work performance. Haptic interfaces, which transmit tactile information to the user of these systems, promise to address these problems. The present work closely examines the principles of human-machine interaction with haptic interfaces, discusses previous research efforts and presents new evidence. Furthermore, a synthesis of empirical evidence is presented from which transparent guidelines for the design and effective use of haptic interfaces are derived. These are combined with previously established guidelines on the design of multi-modal interfaces in form of an interactive software package, the "Human-Machine Interface Design Guide".