Heterogeneous Catalysis And Fine Chemicals Iv

After three meetings in Poitiers, France, the 4th International Symposium on Heterogeneous Catalysis and Fine Chemicals was held under the auspices of the New Swiss Chemical Society in Basel, Switzerland. Fundamental as well as applied contributions on the use of heterogeneous catalysis for the preparation of fine chemicals were presented and discussed. The program consisted of 4 plenary lectures, 28 oral contributions and around 90 posters covering a broad range of reactions and catalytic aspects. 82 of these contributions are collected in the present proceedings, grouped into the following 8 topical areas: - Industrial and engineering problems (7 contributions) - Alkylation and acylation reactions (11 contributions) - Enantio- and diastereoselective hydrogenation reactions (9 contributions) - Chemoselective hydrogenation reactions (12 contributions) - Oxidation reactions (14 contributions) - Immobilized and encapsulated complex catalysts (12 contributions) - Zeolite and clay catalysts (12 contributions) - Miscellaneous topics (5 contributions)

Concentrating on the areas of fine chemicals production, this handbook presents current attempts to combine fine chemicals synthesis with heterogeneous catalysis - a new route to developing modern and clean synthetic methods.

The recession in the traditional heavy industries along with the development of advanced technologies in all the industrial countries has meant that the impact of heterogeneous catalysis in the synthesis of fine chemicals is becoming increasingly noticeable. The second International Symposium on Heterogeneous Catalysis and Fine Chemicals is to be seen in this perspective. Organised by the Laboratory of Catalysis in Organic Chemistry of the University of Poitiers within the framework of the International Symposia of the `Centre National de la Recherche Scientifique' (CNRS), the symposium provided an opportunity for contact between academic researchers and manufacturers, users (or potential users) of solid catalysts for fine chemical synthesis. The book gives an overall view of the problems encountered by academic and industrial researchers. A large variety of reactions are described, the emphasis being on selectivity: chemo-, regio-, stereoselectivity (even enantioselectivity) and on the change of these selectivities as a function of the characteristics of the surface sites (nature, distribution, etc.). The three themes of the symposium, hydrogenation, oxidation and acid-base catalysis were introduced in four plenary lectures and two invited communications, maintaining a balance between the industrial and the academic points of view. Some 60 research papers selected by the Scientific Committee were presented. All are reproduced in full in this proceedings volume.

Table 1 E factors (tonnes of waste generated per tonne of product manufactured [7] Industry segment Annual product tonnage E factor 6 8 Oil refining 10 –10 Approx. 0. 1 4 6 Bulk chemicals 10 –10

Heterogeneous catalysis plays a major role in the organic synthesis of specialty and fine chemicals. However, as the interaction between surface sites and functional groups is complex, more investigations are necessary into the effects of catalysts on the reaction mechanisms. The Third International Symposium on Heterogeneous Catalysis and Fine Chemicals provided an opportunity for discussions on the basic and practical aspects of this subject between researchers, manufacturers and users of solid catalysts for synthesis of fine chemicals. The present volume comprises the invited plenary lectures and research papers classified under the three main headings, hydrogenation, oxidation and acid-catalysis. All papers were refereed. A large variety of reactions are described, the emphasis being on selectivity, taking into account all aspects: chemo-, regio-, and stereoselectivity (including enantioselectivity) and on the change of these selectivities as a function of the characteristics of the catalysts and operating conditions.

The recession in the traditional heavy industries along with the development of advanced technologies in all the industrial countries has meant that the impact of heterogeneous catalysis in the synthesis of fine chemicals is becoming increasingly noticeable. The second International Symposium on Heterogeneous Catalysis and Fine Chemicals is to be seen in this perspective. Organised by the Laboratory of Catalysis in Organic Chemistry of the University of Poitiers within the framework of the International Symposia of the 'Centre National de la Recherche Scientifique' (CNRS), the symposium provided an opportunity for contact between academic researchers and manufacturers, users (or potential users) of solid catalysts for fine chemical synthesis. The book gives an overall view of the problems encountered by academic and industrial researchers. A large variety of reactions are described, the emphasis being on selectivity: chemo-, regio-, stereoselectivity (even enantioselectivity) and on the change of these selectivities as a function of the characteristics of the surface sites (nature, distribution, etc.). The three themes of the symposium, hydrogenation, oxidation and acid-base catalysis were introduced in four plenary lectures and two invited communications, maintaining a balance between the industrial and the academic points of view. Some 60 research papers selected by the Scientific Committee were presented. All are reproduced in full in this proceedings volume.

This eBook covers the application of high-throughput R&D to both fundamental and applied catalysis including catalyst synthesis, characterization, and testing in various reactor types. Chapters include topics such as applications ranging from optimizations of established industrial catalysts to the discovery of innovative new materials, examples of the development of innovative parallel characterization methods, and cases of real catalyst testing in small scale reactor systems. Readers will also find chapters that cover commodity chemicals produced using continuous gas phase processes as well as fine chemicals produced in liquid phase batch reactors. The potential of industrial chemicals production from biorenewable feedstocks is also presented. The steadily improving high throughput workflows are today being applied to relevant reactions and targets such as hydrotreating, Deacon oxidation, Fischer-Tropsch, propane dehydrogenation, C4 oxidation, methane coupling, exhaust gas catalysis, bio-based Nylon, fuel cells and vitamins. The topics presented in this eBook have been contributed by researchers from academia as well as industry, making this eBook a well-balanced reference, which could be of particular interest to professional, industrial or service R&D labs.

This series offers practical help for advanced undergraduate, graduate and postgraduate students, as well as experienced chemists in industry and academia working with catalysts in organic and organometallic synthesis. It features tested and validated procedures, authoritative reviews on classes of catalysts, and assessments of all types of catalysts. Micro- and Mesoporous Solid Catalysts describes the use of zeolites and mesoporous solids as catalysts for the production of fine and specialty chemicals. Specific tips and hints are provided and some typical procedures are described in detail In addition to discussing the pros and cons, several major organic transformations are examined including aromatic substitutions, heterocyclic ring formation, amines synthesis, oligomerisation, oxidation and hydroxylation, and other regioselective and stereoselective reactions Features tutorial introductory chapters, including tips and hints for achieving successful organic transformations Important reactions are featured together with recommendations to resolve potential problems.