Hybrid Finite Element Method For Stress Analysis Of Laminated Composites

This book has one single purpose: to present the development of the partial hybrid finite element method for the stress analysis of laminated composite structures. The reason for this presentation is because the authors believe that partial hybrid finite element method is more efficient that the displacement based finite element method for the stress analysis oflaminated composites. In fact, the examples in chapter 5 of this book show that the partial hybrid finite element method is about 5 times more efficient than the displacement based finite element method. Since there is a great need for accurate and efficient calculation of interlaminar stresses for the design using composites, the partial hybrid finite method does provide one possible solution. Hybrid finite method has been in existence since 1964 and a significant amount of work has been done on the topic. However, the authors are not aware of any systematic piece of literature that gives a detailed presentation of the method. Chapters of the displacement finite element method and the evolution 1 and 2 present a sununary of the hybrid finite element method. Hopefully, these two chapters can provide the readers with an appreciation for the difference between the displacement finite element method and the hybrid finite element. It also should prepare the readers for the introduction of partial hybrid finite element method presented in chapter 3.

Composite materials are increasingly used in aerospace, underwater, and automotive structures. To take advantage of the full potential of composite materials, structural analysts and designers must have accurate mathematical models and design methods at their disposal. The objective of this monograph is to present the laminated plate theories and their finite element models to study the deformation, strength and failure of composite structures. Emphasis is placed on engineering aspects, such as the analytical descriptions, effective analysis tools, modeling of physical features, and evaluation of approaches used to formulate and predict the response of composite structures. The first chapter presents an overview of the text. Chapter 2 is devoted to the introduction of the definitions and terminology used in composite materials and structures. Anisotropic constitutive relations and Iaminate plate theories are also reviewed. Finite element models of laminated composite plates are presented in Chapter 3. Numerical evaluation of element coefficient matrices, post-computation of strains and stresses, and sample examples of laminated plates in bending and vibration are discussed. Chapter 4 introduces damage and failure criteria in composite laminates. Finally, Chapter 5 is dedicated to case studies involving various aspects and types of composite structures. Joints, cutouts, woven composites, environmental effects, postbuckling response and failure of composite laminates are discussed by considering specific examples.

Advanced Finite Element Method in Structural Engineering systematically introduces the research work on the Finite Element Method (FEM), which was completed by Prof. Yu-qiu Long and his research group in the past 25 years. Seven original theoretical achievements - for instance, the Generalized Conforming Element method, to name one - and their applications in the fields of structural engineering and computational mechanics are discussed in detail. The book also shows the new strategies for avoiding five difficulties that exist in traditional FEM (shear-locking problem of thick plate elements; sensitivity problem to mesh distortion; non-convergence problem of non-conforming elements; accuracy loss problem of stress solutions by displacement-based elements; stress singular point problem) by utilizing foregoing achievements.

This book presents selected papers presented at the 8th International Conference "Design, Modeling and Experiments of Advanced Structures and Systems" (DeMEASS VIII, held in Moscow, Russia in May 2017) and reflects the modern state of sciences in this field. The contributions contain topics like Piezoelectric, Ferroelectric, Ferroelastic and Magnetostrictive Materials, Shape Memory Alloys and Active Polymers, Functionally Graded Materials, Multi-Functional Smart Materials and Structures, Coupled Multi-Field Problems, Design and Modeling of Sensors and Actuators, Adaptive Structures.

While the theory and application of finite elements methods can be extended to incompatible, hybrid, and mixed element methods, important issues, such as determining the reliability of the solution of incompatible multivariable elements, along with a common perception of impracticality, have hindered the widespread implementation of these methods. Today, however, recent advances--many directly attributable to these authors--have allowed the development of the stability theory and abstract mathematics to useful tools. Hybrid and Incompatible Finite Element Methods introduces these advances in the theory and applications of incompatible and multivariable finite element methods. After an overview of the variation formulation of finite element methods in solid mechanics, the authors discuss the fundamental theory and systematically demonstrate the theoretical foundations of incompatible elements and their application to different problems in the theory of elasticity. They also introduce new ideas in the development of hybrid finite elements, study the numerical stability of the hybrid and mixed element, and establish the theory of zero energy deformation modes. The final chapters, explore applications to fracture problems, present a bound analysis for fracture parameters, and demonstrate an implementation of a finite element analysis program.

This book contains technical papers, presented at the third Canadian International Conference on Composites held in Canada in 2001, on topics including liquid composite molding, process modelling, virtual manufacturing, novel materials and processes, and metal matrix composites.

"The International Conference on Heterogeneous Material Mechanics (ICHMM) in Huangshan, China, June 3-8, 2008 follows the successful inaugural ICHMM held in ChongQing, China in June, 2004. The ICHMM series is the first international forum that focuses exclusively on various issues related to the behavior of heterogeneous materials in a broad sense. The object of the ICHMM is to present and publicize integrated scientific and engineering approaches to the measurement and modeling of phenomena at the interface of materials science, physics, chemistry, biology, and solid mechanics."--Preface, p. xxxix.

Structural Analysis Systems: Software-Hardware Capability-Compatibility-Applications, Volume 2 is a practical guidebook on structural analysis systems and their applications. It provides detailed information about a specific software, its postprocessor capabilities and limitations, computer-aided design connection, and compatibility with the most common computers. Several practical examples from industry with computer and user cost are given. This volume consists of 17 chapters and begins with a description of AFAG, a dual finite element analysis program based on the flexibility method. The discussion then turns to the AQUADYN system, designed primarily to reduce the hydrodynamics problem to a linear integral equation for large floating or immersed structures. The following chapters focus on other structural analysis computer programs such as BOSOR4 and BOSOR5, INFESA, MEF/MOSAIC, RCAFAG, and STRUGEN. Some general purpose and special purpose finite element programs used for stress analysis of composite materials are also considered. This book will be a useful resource for practitioners in scientific and industrial disciplines such as mechanical or civil engineering, informatics, applied mathematics, and computer science.