Hydrodynamic Design And Assessment Of Water And Wastewater Treatment Units

Water and wastewater treatment normally take place in a series of continuous flow units, each designed to perform a step of the intended purification process - typically involving coagulation or flocculation, sedimentation or filtration, and disinfection. The flow pattern governs the residence/contact time, turbulence levels, collisions and shear to which different fluid portions are subjected in their passage through the unit. The efficiency of a given unit depends as much on the relevant physical, chemical or biological reaction as on the flow pattern taking place inside. This combined effect of flow features on process efficiency is often overlooked in teaching the design of water and wastewater treatment units, and so it is not uncommon to find treatment units in operating in a cost-ineffective way, causing health and environmental problems. This book introduces engineering students to concepts and practical measures associated with the rational design of treatment units, leading to more realistic and potentially optimal solutions for new units as well as for retrofitting existing units. Key basic concepts and suitable analytical tools are described, illustrated and worked through using tutorials, practical examples and proposed problems. Engineering undergraduates and graduates should benefit from the book while undertaking standalone modules on the topic and/or supplementary classes of existing courses on unit treatment processes. The book may also be useful for technical and engineering staff involved in designing and/or retrofitting units for better cost-effectiveness and footprint reduction of the water and wastewater treatment sector.

Water and wastewater treatment normally take place in a series of continuous flow units, each designed to perform a step of the intended purification process - typically involving coagulation or flocculation, sedimentation or filtration, and disinfection. The flow pattern governs the residence/contact time, turbulence levels, collisions and shear to which different fluid portions are subjected in their passage through the unit. The efficiency of a given unit depends as much on the relevant physical, chemical or biological reaction as on the flow pattern taking place inside. This combined effect of flow features on process efficiency is often overlooked in teaching the design of water and wastewater treatment units, and so it is not uncommon to find treatment units in operating in a cost-ineffective way, causing health and environmental problems. This book introduces engineering students to concepts and practical measures associated with the rational design of treatment units, leading to more realistic and potentially optimal solutions for new units as well as for retrofitting existing units. Key basic concepts and suitable analytical tools are described, illustrated and worked through using practical examples. Engineering undergraduates and graduates should benefit from the book while undertaking standalone modules on the topic and/or supplementary classes of existing courses on unit treatment processes. The book may also be useful for technical and engineering staff involved in designing and/or retrofitting units for better cost-effectiveness and footprint reduction of the water and wastewater treatment sector.

This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Fundamental environmental engineering principles are used as the foundation for rigorous design of conventional and advanced water and wastewater treatment processes. Integrating theory and design, this title follows the flow of water through a water treatment plant and the flow of wastewater through a wastewater treatment plant.

A thorough analysis of public policy and the Clean Water Act'seffect on water quality in the U.S. Using water quality data and historical records from the past 60years, this book presents the measured impact of the 1972 CleanWater Act on domestic waterways-ecologically, politically, andeconomically. Municipal Wastewater Treatment supports thehypothesis that the Act's regulation of wastewater treatmentprocesses at publicly owned treatment works (POTW) and industrialfacilities has achieved significant success. The authors' case ispresented in: * Background information on the history of water pollution controland water quality management * Chapters addressing long-term trends in biochemical oxygen demandloadings from municipal wastewater plants and the "worst-case"dissolved oxygen levels in waterways downstream of point sourcesbefore and after the Clean Water Act * Nine case study assessments of long-term trends of pollutantloading water quality and environmental resources associated withPOTW discharges Using long-term trends in dissolved oxygen as the key indicator ofwater quality improvements, this book provides a detailedretrospective analysis of the effectiveness of the water pollutioncontrol policies and regulations of the 1972 Clean Water Act. Thesuccesses of the Act that have been achieved over the past 30 yearsare placed in the historical context of the "Great SanitaryAwakening" of the 19th century and changes in public policies forwater supply and water pollution control that have evolved duringthe 20th century to protect public health and the intrinsic valueof aquatic resources. Case study sites include the ConnecticutRiver, Hudson-Raritan Estuary, Delaware Estuary, Potomac Estuary,Upper Chattahoochee River, Ohio River, Upper Mississippi River, andWillamette River. Complete with end-of-chapter summaries and conclusions, MunicipalWastewater Treatment: Evaluating Improvements in National WaterQuality is an essential book for engineers, scientists, regulators,and consultants involved in water quality management and wastewatertreatment, as well as students of environmental engineering,environmental science, and public policy.

Wastewater and drinking water treatment are essential elements of urban infrastructure. In the course of the last century there has been enormous technical development, so successful that for the general public in industrialized countries this infrastructure is hardly noticed. Nevertheless there is ongoing activity to further improve the existing processes. The IWA Leading Edge Technology conference held in Prague helped to stimulate this development and this book helps disseminate the results. A selection of presentations from the conference are included in this volume. Wastewater and drinking-water treatment are normally considered as two separate fields due to the very different boundary conditions that apply. Nevertheless several issues such as membrane processes, removal of micropollutants and water reuse are of crucial importance to both. This potential for cross-fertilization further enhances the value of this collection of high-quality articles that delineate the leading edge of research and development in water and wastewater treatment.

The 2nd edition of Fundamentals of Wastewater Treatment and Design introduces readers to the fundamental concepts of wastewater treatment, followed by engineering design of unit processes for sustainable treatment of municipal wastewater and resource recovery. It has been completely updated with new chapters to reflect current advances in design, resource recovery practices and research. Another highlight is the addition of the last chapter, which provides a culminating design experience of both urban and rural wastewater treatment systems. Filling the need for a textbook focused on wastewater, it covers history, current practices, emerging concerns, future directions and pertinent regulations that have shaped the objectives of this important area of engineering. Basic principles of reaction kinetics, reactor design and environmental microbiology are introduced along with natural purification processes. It also details the design of unit processes for primary, secondary and advanced treatment, as well as solids processing and removal. Recovery of water, energy and nutrients are explained with the help of process concepts and design applications. This textbook is designed for undergraduate and graduate students who have some knowledge of environmental chemistry and fluid mechanics. Professionals in the wastewater industry will also find this a handy reference.