Ibm Power Systems Hmc Implementation And Usage Guide

The IBM® Hardware Management Console (HMC) provides to systems administrators a tool for planning, deploying, and managing IBM Power SystemsTM servers. This IBM Redbooks® publication is an extension of IBM Power Systems HMC Implementation and Usage Guide, SG24-7491 and also merges updated information from IBM Power Systems Hardware Management Console: Version 8 Release 8.1.0 Enhancements, SG24-8232. It explains the new features of IBM Power Systems Hardware Management Console Version V8.8.1.0 through V8.8.4.0. The major functions that the HMC provides are Power Systems server hardware management and virtualization (partition) management. Further information about virtualization management is in the following publications: IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 IBM PowerVM Enhancements What is New in 2013, SG24-8198 IBM Power Systems SR-IOV: Technical Overview and Introduction, REDP-5065 The following features of HMC V8.8.1.0 through HMC V8.8.4.0 are described in this book: HMC V8.8.1.0 enhancements HMC V8.8.4.0 enhancements System and Partition Templates HMC and IBM PowerVM® Simplification Enhancement Manage Partition Enhancement Performance and Capacity Monitoring HMC V8.8.4.0 upgrade changes

The IBM® Hardware Management Console (HMC) provides systems administrators a tool for planning, deploying, and managing IBM Power SystemsTM servers. This IBM Redbooks® publication is designed for system administrators to use as a desk-side reference when managing partition-capable IBM Power Systems servers by using the HMC. The major functions that the HMC provides are Power Systems server hardware management and virtualization (partition) management. You can find information about virtualization management in the following documents: - A Practical Guide for Resource Monitoring and Control (RMC), SG24-6615 - IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 - Implementing IBM Systems Director 6.1, SG24-7694 - Hardware Management Console V7 Handbook, SG24-7491 - IBM PowerVM Live Partition Mobility, SG24-7460 - IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 - Converting Hardware Management Console (HMC) 7042-CR6 or 7042-CR7 Models to RAID1, REDP-4909 The following topics are described: - Plan to implement the HMC - Configure the HMC - Operate the HMC - Manage software levels on the HMC - Use service functions on the HMC - Update firmware of managed systems - Use IBM System Planning Tool deployments In addition, there is an explanation on how to use the new HMC graphical user interface and the new HMC commands that are available with HMC Version 7, Release 7, modification 60.

The IBM® Hardware Management Console (HMC) provides systems administrators a tool for planning, deploying, and managing IBM Power SystemsTM servers. This IBM Redbooks® publication is an extension of IBM Power Systems HMC Implementation and Usage Guide, SG24-7491. It explains the new features of IBM Power Systems Hardware Management Console Version V8.8.1.0. The major function that the HMC provides are Power Systems server hardware management and virtualization (partition) management. You can find information about virtualization management in the following documents: IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 IBM PowerVM Enhancements What is New in 2013, SG24-8198 IBM Power Systems SR-IOV: Technical Overview and Introduction, REDP-5065 The following new features of HMC V8.8.1.0 are described: HMC V8.8.1.0 enhancements System and Partition Templates HMC and IBM PowerVM® Simplification Enhancements Manage Partition Enhancement Performance and Capacity Monitoring HMC V8.8.1.0 upgrade changes

This IBM® Redbooks® publication addresses performance tuning topics to help leverage the virtualization strengths of the POWER® platform to solve clients' system resource utilization challenges, and maximize system throughput and capacity. We examine the performance monitoring tools, utilities, documentation, and other resources available to help technical teams provide optimized business solutions and support for applications running on IBM POWER systems' virtualized environments. The book offers application performance examples deployed on IBM Power SystemsTM utilizing performance monitoring tools to leverage the comprehensive set of POWER virtualization features: Logical Partitions (LPARs), micro-partitioning, active memory sharing, workload partitions, and more. We provide a well-defined and documented performance tuning model in a POWER system virtualized environment to help you plan a foundation for scaling, capacity, and optimization . This book targets technical professionals (technical consultants, technical support staff, IT Architects, and IT Specialists) responsible for providing solutions and support on IBM POWER systems, including performance tuning.

This IBM® RedpaperTM publication describes the adapter-based virtualization capabilities that are being deployed in high-end IBM POWER7+TM processor-based servers. Peripheral Component Interconnect Express (PCIe) single root I/O virtualization (SR-IOV) is a virtualization technology on IBM Power Systems servers. SR-IOV allows multiple logical partitions (LPARs) to share a PCIe adapter with little or no run time involvement of a hypervisor or other virtualization intermediary. SR-IOV does not replace the existing virtualization capabilities that are offered as part of the IBM PowerVM® offerings. Rather, SR-IOV compliments them with additional capabilities. This paper describes many aspects of the SR-IOV technology, including: A comparison of SR-IOV with standard virtualization technology Overall benefits of SR-IOV Architectural overview of SR-IOV Planning requirements SR-IOV deployment models that use standard I/O virtualization Configuring the adapter for dedicated or shared modes Tips for maintaining and troubleshooting your system Scenarios for configuring your system This paper is directed to clients, IBM Business Partners, and system administrators who are involved with planning, deploying, configuring, and maintaining key virtualization technologies.

This IBM® Redbooks® publication provides an introduction to PowerVMTM virtualization technologies on Power System servers. PowerVM is a combination of hardware, firmware, and software that provides CPU, network, and disk virtualization. These are the main virtualization technologies: POWER7, POWER6, and POWER5 hardware POWER Hypervisor Virtual I/O Server Though the PowerVM brand includes partitioning, management software, and other offerings, this publication focuses on the virtualization technologies that are part of the PowerVM Standard and Enterprise Editions. This publication is also designed to be an introduction guide for system administrators, providing instructions for these tasks: Configuration and creation of partitions and resources on the HMC Installation and configuration of the Virtual I/O Server Creation and installation of virtualized partitions Examples using AIX, IBM i, and Linux This edition has been updated with the latest updates available and an improved content organization.

This IBM® Redbooks® publication for IBM Power SystemsTM with IBM PowerHA® SystemMirror® Standard and Enterprise Editions (hardware, software, practices, reference architectures, and tools) documents a well-defined deployment model within an IBM Power Systems environment. It guides you through a planned foundation for a dynamic infrastructure for your enterprise applications. This information is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing high availability and support for the IBM PowerHA SystemMirror Standard and Enterprise Editions on IBM POWER® systems.

This IBM® Redbooks® publication provides best practices for planning, installing, maintaining, and monitoring the IBM PowerVM® Enterprise Edition virtualization features on IBM POWER7® processor technology-based servers. PowerVM is a combination of hardware, PowerVM Hypervisor, and software, which includes other virtualization features, such as the Virtual I/O Server. This publication is intended for experienced IT specialists and IT architects who want to learn about PowerVM best practices, and focuses on the following topics: Planning and general best practices Installation, migration, and configuration Administration and maintenance Storage and networking Performance monitoring Security PowerVM advanced features This publication is written by a group of seven PowerVM experts from different countries around the world. These experts came together to bring their broad IT skills, depth of knowledge, and experiences from thousands of installations and configurations in different IBM client sites.