In Situ Studies With Photons Neutrons And Electrons Scattering Ii

This book provides an insight into current research topics, focusing special attention exactly on welding issues. The presented research work demonstrates that application of synchrotron and neutron radiation in combination with other techniques enables the basic understanding of material-related processes to be extended appreciably. It also shows ways of how to improve new materials and their use in industry. Following on from the 1st workshop in 2009 at BAM Berlin, a 2nd workshop dealing with this subject matter was held in 28-30 November, 2012 in Osaka/Japan with international participation of scientists from sixteen countries. The book includes selected contributions from the various subject blocks, precisely covering issues of practical and immediately implementable benefit to industrial enterprises. Therefore, peer-reviewed papers dealing with the following topics are contained as well: - Phase transformation during welding, metallurgy and material development - Evolution and significance of residual stresses - Investigations into laser and electron beam welding

In-situ scattering and diffraction measurements using synchrotron and neutron beam lines have become a viable tool to look at the non-equilibrium processing of advanced materials. This volume presents the subject from the theoretical and experimental standpoint, in order to provide a closer insight into the different synchrotron and neutron diffraction techniques as well as innovative microscopy techniques. It addresses the following items: - Phase detection and quantification - In-situ welding experiments - Stress/strain build-up - Model development and Simulation - Analysis tools and programming

Selective Laser Melting (SLM), also referred to as Laser Powder Bed Fusion (L-PBF), offers significant advantages for the manufacturing of complex, high-quality parts. However, its market share is still small compared to conventional manufacturing technologies. Major drawbacks hindering an industrial ramp-up are low productivity, high part costs and issues with quality and reproducibility. Comprehensive research has been done to overcome these challenges, but little attention has been paid to addressing them by optimizing the laser beam profile. Therefore, the author examines the effect of the laser beam profile on the productivity and process stability through both numerical and experimental investigations. The results show clear advantages an optimized laser beam profile offers.

The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels Reviews research on diffusionless transformations and phase transformations in high strength steels Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.

This invaluable book is based on lecture notes developed for a one-semester graduate course entitled “Interaction of Radiation with Matter”, taught in the Department of Nuclear Science and Engineering at the Massachusetts Institute of Technology. The main objective of the course is to teach enough quantum and classical radiation theory to allow students in engineering and the applied sciences to understand and have access to the vast literature on applications of ionizing and non-ionizing radiation in materials research. Besides presenting the fundamental physics of radiation interactions, the book devotes individual chapters to some of the important modern-day experimental tools, such as nuclear magnetic resonance, photon correlation spectroscopy, and the various types of neutron, x-ray, and light-scattering techniques. End-of-chapter problems have been added for the new edition, making the book more appropriate as a course textbook.

Over the last half century we have witnessed tremendous progress in the production of high-quality photons by electrons in accelerators. This dramatic evolution has seen four generations of accelerators as photon sources. The 1st generation used the electron storage rings built primarily for high-energy physics experiments, and the synchrotron radiation from the bending magnets was used parasitically. The 2nd generation involved rings dedicated to synchrotron radiation applications, with the radiation again from the bending magnets. The 3rd generation, currently the workhorse of these photon sources, is dedicated advanced storage rings that employ not only bending magnets but also insertion devices (wigglers and undulators) as the source of the radiation. The 4th generation, which is now entering operation, is photon sources based on the free electron laser (FEL), an invention made in the early 1970s. Each generation yielded growths in brightness and time resolution that were unimaginable just a few years earlier. In particular, the progression from the 3rd to 4th generation is a true revolution; the peak brilliance of coherent soft and hard x-rays has increased by 7-10 orders of magnitude, and the image resolution has reached the angstrom (1 Å = 10-10 meters) and femto-second (1 fs = 10-15 second) scales. These impressive capabilities have fostered fundamental scientific advances and led to an explosion of numerous possibilities in many important research areas including material science, chemistry, molecular biology and the life sciences. Even more remarkably, this field of photon source invention and development shows no signs of slowing down. Studies have already been started on the next generation of x-ray sources, which would have a time resolution in the atto-second (1 as = 10-18 second) regime, comparable to the time of electron motion inside atoms. It can be fully expected that these photon sources will stand out among the most powerful future science research tools. The physics community as well as the entire scientific community will hear of many pioneering and groundbreaking research results using these sources in the coming years. This volume contains fifteen articles, all written by leading scientists in their respective fields. It is aimed at the designers, builders and users of accelerator-based photon sources as well as general audience who are interested in this topic. Contents:Invention of the Free Electron Laser (J M J Madey)Photon Science at Accelerator-Based Light Sources (J R Schneider)Electromagnetic Radiation in Accelerator Physics (G Stupakov)Storage Ring Light Sources (Z T Zhao)Low-Gain Free Electron Lasers (N Vinokurov)Soft and Hard X-Ray SASE Free Electron Lasers (S Schreiber)Energy Recovery Linacs for Light Sources (R Hajima)Compton Sources of Electromagnetic Radiation (G A Krafft & G Priebe)Accelerator-Based Sources of Infrared and Terahertz Radiation (A-S Müller)The Next Generation of X-Ray Sources (C Pellegrini)Undulators and Other Insertion Devices (E Levichev & N Vinokurov)High Performance Electron Injectors (M Ferrario & T Shintake)Electron-Beam-Based Sources of Ultra-Short X-Ray Pulses (A Zholents)The Large Hadron Collider from Conception to Commissioning: A Personal Recollection (L Evans)G I Budker: Brilliant Physicist, Great Scientific Leader (A N Skrinsky) Readership: Physicists and engineers in accelerator science. Keywords:Free Electron Laser;Photon Sources;Hadron Colliders;Light Sources;Electromagnetic Radiation