Introduction To Rf Power Amplifier Design And Simulation

Introduction to RF Power Amplifier Design and Simulation fills a gap in the existing literature by providing step-by-step guidance for the design of radio frequency (RF) power amplifiers, from analytical formulation to simulation, implementation, and measurement. Featuring numerous illustrations and examples of real-world engineering applications, this book: Gives an overview of intermodulation and elaborates on the difference between linear and nonlinear amplifiers Describes the high-frequency model and transient characteristics of metal–oxide–semiconductor field-effect transistors Details active device modeling techniques for transistors and parasitic extraction methods for active devices Explores network and scattering parameters, resonators, matching networks, and tools such as the Smith chart Covers power-sensing devices including four-port directional couplers and new types of reflectometers Presents RF filter designs for power amplifiers as well as application examples of special filter types Demonstrates the use of computer-aided design (CAD) tools, implementing systematic design techniques Blending theory with practice, Introduction to RF Power Amplifier Design and Simulation supplies engineers, researchers, and RF/microwave engineering students with a valuable resource for the creation of efficient, better-performing, low-profile, high-power RF amplifiers.

Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of cutting-edge research in the area of large-signal device modeling and RF power amplifier design at the Georgia Institute of Technology, and have the potential to significantly address issues of performance and cost-effectiveness in this area. Richly complemented with hundreds of figures and equations, Modeling and Design Techniques for RF Power Amplifiers introduces and explores the most important topics related to RF power amplifier design under one concise cover. With a focus on efficiency enhancement techniques and the latest advances in the field, coverage includes: Device modeling for CAD Empirical modeling of bipolar devices Scalable modeling of RF MOSFETs Power amplifier IC design Power amplifier design in silicon Efficiency enhancement of RF power amplifiers The description of state-of-the-art techniques makes this book a valuable and handy reference for practicing engineers and researchers, while the breadth of coverage makes it an ideal text for graduate- and advanced undergraduate-level courses in the area of RF power amplifier design and modeling.

Front cover -- Titelseite -- Impressum -- Acknowledgments -- Contents -- List of Abbreviations and Acronyms -- Abstract -- Zusammenfassung -- Chapter 1 Introduction -- 1.1 Principle of the Partitioning Design Approach -- 1.2 Dissertation Organization -- Chapter 2 Investigation of Planar-Interconnection -- 2.1 Active Chip Device Interconnection -- 2.1.1 Die Attach -- 2.1.2 Wire Bonding Pad-To-Microstrip -- 2.2 Microstrip-to-Microstrip Interconnection -- 2.2.1 Soldering -- 2.2.2 Multi-Wire Bonding -- 2.2.3 Copper Ribbon -- 2.2.4 Silver- Painting -- Chapter 3 Analysis and Modeling of Passive SMD Components -- 3.1 SMD Resistor -- 3.2 SMD Capacitor -- 3.3 SMD Inductor -- Chapter 4 Modeling of AlGaAs/GaAs HEMT Chip Device -- 4.1 AIGaAs/GaGa HEMT Chip -- 4.2 Modeling Approach Overview -- 4.3 Small-Signal Modeling -- 4.3.1 Extrinsic Parameter Extraction -- 4.3.2 Intrinsic Parameter Extraction -- 4.4 Large-Signal Modeling -- 4.4.1 Gate Current and Charge Models -- 4.4.2 Drain Current Model -- 4.4.3 Model Verification -- Chapter 5 Demonstrator Design of a Class-AB Power Amplifier Following -- 5.1 Micro-Packaged Device Characterization -- 5.1.1 Small-Signal Performance -- 5.1.2 Large-Signal Performance -- 5.2 Bias Network Design -- 5.2.1 Drain Bias Network -- 5.2.2 Gate Bias Network -- 5.3 Matching Network Design -- 5.3.1 Matching Impedance Determination -- 5.4 Power Amplifier Performance Evaluation -- 5.4.1 Small-Signal Performance -- 5.4.2 Large-Signal Performance -- Chapter 6 Conclusions and Outlook -- Appendix -- Appendix A THLR In-Fixture Calibration -- Appendix B Precise Determination of Substrate Permittivity -- Appendix C Schematic Circuit of the Designed Power Amplifier Demonstrator -- Appendix D Power Amplifier Design Following the Conventional Design Approach -- References -- Back cover

This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.

This much-anticipated volume builds on the author's best selling and classic work, RF Power Amplifiers for Wireless Communications (Artech House, 1999), offering experienced engineers a more in-depth understanding of the theory and design of RF power amplifiers. An invaluable reference tool for RF, digital and system level designers, the book includes discussions on the most critical topics for professionals in the field, including envelope power management schemes and linearization.

This much-anticipated volume builds on the author's popular work, RF Power Amplifiers for Wireless Communications (Artech House, 1999), offering you a more in-depth understanding of the theory and design of RF power amplifiers. An invaluable reference tool for RF, digital and system level designers, the book enables you to efficiently design linear RF power amplifiers , and includes detailed discussions on envelope power management schemes and linearization techniques.

RF power amplifiers are implemented in communication, semiconductor wafer processing, magnetic resonance imaging (MRI), and radar systems to produce RF signal with the desired characteristics to perform several critical tasks in the entire system. They can be designed to operate in linear or switch-mode, depending on the specific application. This book explores the design and implementation methods for both linear and switch-mode amplifiers with real world engineering problems. The text discusses phased controlled switch-mode amplifiers and distortion and modulation effects in RF amplifiers. It illustrates the interface and integration of components and sub-systems for RF amplifiers. The material is further reinforced with MATLAB design files.

This second edition of the highly acclaimed RF Power Amplifiers has been thoroughly revised and expanded to reflect the latest challenges associated with power transmitters used in communications systems. With more rigorous treatment of many concepts, the new edition includes a unique combination of class-tested analysis and industry-proven design techniques. Radio frequency (RF) power amplifiers are the fundamental building blocks used in a vast variety of wireless communication circuits, radio and TV broadcasting transmitters, radars, wireless energy transfer, and industrial processes. Through a combination of theory and practice, RF Power Amplifiers, Second Edition provides a solid understanding of the key concepts, the principle of operation, synthesis, analysis, and design of RF power amplifiers. This extensive update boasts: up to date end of chapter summaries; review questions and problems; an expansion on key concepts; new examples related to real-world applications illustrating key concepts and brand new chapters covering ‘hot topics’ such as RF LC oscillators and dynamic power supplies. Carefully edited for superior readability, this work remains an essential reference for research & development staff and design engineers. Senior level undergraduate and graduate electrical engineering students will also find it an invaluable resource with its practical examples & summaries, review questions and end of chapter problems. Key features: • A fully revised solutions manual is now hosted on a companion website alongside new simulations. • Extended treatment of a broad range of topologies of RF power amplifiers. • In-depth treatment of state-of-the art of modern transmitters and a new chapter on oscillators. • Includes problem-solving methodology, step-by-step derivations and closed-form design equations with illustrations.